Bticino N4601 User manual

N4601
Bticino
Brand
Bticino
Model
N4601
Type
User manual

This manual is also suitable for

Bticino N4601 is a sophisticated anti-intrusion control panel that offers advanced security features for residential and small commercial properties. With its user-friendly interface and comprehensive functionality, it provides reliable protection and peace of mind.

Key features of Bticino N4601 include:

  • Eight programmable inputs for connecting various sensors and detectors, allowing customization of the security system to suit specific needs.

  • Four programmable outputs for controlling external devices like sirens, lights, or gates, enabling automated responses to alarm events.

  • Two configurable partitions that allow independent arming and disarming of different areas within the premises, providing flexibility and convenience.

Bticino N4601 is a sophisticated anti-intrusion control panel that offers advanced security features for residential and small commercial properties. With its user-friendly interface and comprehensive functionality, it provides reliable protection and peace of mind.

Key features of Bticino N4601 include:

  • Eight programmable inputs for connecting various sensors and detectors, allowing customization of the security system to suit specific needs.

  • Four programmable outputs for controlling external devices like sirens, lights, or gates, enabling automated responses to alarm events.

  • Two configurable partitions that allow independent arming and disarming of different areas within the premises, providing flexibility and convenience.

11/09-01-PC
Version 1.0
TiSecurityBasic user manual
Software for the conguration of the 3485B
and L/N/NT/HC/HS/HD4601 Burglar alarm units
3
CONTENTS
1. Hardware and Software requirements 4
2. Installation 4
3. Firmware update 8
4. Upload and download conguration 12
4
TisecurityBasic
Hardware requirements
• Personal Computer with Pentium processor >400 MHz
• 256 MB RAM
• SVGA graphics card with resolution 800x600
• CD-ROM drive
• Mouse
Software requirements
• Windows 2000, XP or Vista; Internet Explorer 6.0 or higher.
Space used on hard-disk
• 91 Mbyte
1. Hardware
and Software
requirements
Warning: The TiSecurityBasic
programme is the essential
tool for the configuration
of the 3485B and L/N/NT/
H/HC/HS/HD4601 Burglar
alarm Units. The content of
this program is under the
exclusive rights of BTicino
SpA
Follow this procedure to install the TiSecurityBasic programme:
1. Insert the CD-ROM in the drive;
2. After displaying the main page in web format, select “Install TiSecurityBasic”;
3. The installation programme will now copy the system les necessary for the execution of the
TiSecurityBasic programme.
2. Installation
> Select the installation kit language
> Click the Ok button
5
The following screen will appear
> Click the Next button
> Click Next to install the program in the default directory
“c:\Programmi\BTicino\TisecurityBasic_0100”
> Click Browse to select the required path
or
The following screen will appear
6
TisecurityBasic
The following screen will appear
> Click Next if you are ready to install TiSecurityBasic
or
> Click Back to return to the previous screen
The following screen will appear
> Select the TiSecurityBasic interface language (When the application is running normally it will
be possible to change the language without re-installing)
> Click Next
7
The installation of the program will now begin
Depending on the operating system settings in use, it may be necessary to restart the system
> Click Finish to end the process
8
TisecurityBasic
3. Firmware update
With the TiSecurityBasic software, it is possible to update the permanent software of the Unit with
new revision procedures distributed by BTicino. This function enables you to implement possible
improvements and new functionalities in existing installations without replacing the hardware.
Wa r n i n g : f o r p r o p e r
functioning of the software,
the 3485B and L/N/NT/H/HC/
HS/HD4601 Burglar Alarm
units must be installed
according to the instructions
specied in the Installation
Manuals supplied with the
device.
> Select the type of Unit to be updated, Select Firmware Update and click Next
> Select the COM port of the PC to which the Unit will be connected
The following screen will appear
9
> Select the le containing the updated rmware version (.fwz)
> Click the Open button
> Click Open le (.fwz)
> Click Next to continue
10
TisecurityBasic
Item 335919
Item 3559
Reset
Button
ON OFF
slide switch
b
a
b
ON
BUS
ART.3485
T1
_
OFF
Item 335919
Item 3559
Reset
Button
ON OFF
slide switch
> Access the Unit Maintenance menu and ip the slide switch to OFF
>
Connect the programming cable to the COM port of the PC and to the 6–way connector of the
Unit
Connection to the Unit item 3485B
Connection to the Unit item L/N/NT/HC/HS/HD4601
11
> Click Next; the rmware update procedure will start
Afterwards, the following screen will appear
> Disconnect the programming cable from the Unit
> Flip the slide switch back to ON
> Press button to reset the Unit
> If you want to update other Units using the same rmware, tick the box Continue with another
item; If you click Next, the above-mentioned procedure will be given again
or
> Click Next to go back to the rst screen
12
TisecurityBasic
4. Upload and
download
conguration
The Upload function allows you to acquire the conguration on the Unit and save it in a le so it
can be used to retrieve the conguration of the Unit or to congure other Units with the Download
function.
The procedures to execute these functions are basically the same; for the sake of brevity, here is an
example.
> Select the procedure
> Click Next
> Select the COM port of the PC to which the Unit will be connected
13
> Select the path and enter the name you want to give to the conguration le (for the Download
function, select the conguration le to be transferred to the Unit)
> Click Save (Open for Download)
> Click on Save As (Open le for Download)
> Click Next to continue
14
TisecurityBasic
> Access the Maintenance menu of the Unit
>
Connect the programming cable to the COM port of the PC and to the 6–way connector of the Unit
> Click Next; the selected procedure will start
Afterwards, the following screen will appear
> Disconnect the programming cable from the Unit
> Click Next to go back to the rst screen
BTicino SpA reserves at any time the right to modify the contents of this booklet and to communicate,
in any form and modality, the changes brought to the same.
BTicino SpA
Via Messina, 38
20154 Milano - Italy
www.bticino.it
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Bticino N4601 User manual

N4601
Bticino
Brand
Bticino
Model
N4601
Type
User manual
This manual is also suitable for

Bticino N4601 is a sophisticated anti-intrusion control panel that offers advanced security features for residential and small commercial properties. With its user-friendly interface and comprehensive functionality, it provides reliable protection and peace of mind.

Key features of Bticino N4601 include:

  • Eight programmable inputs for connecting various sensors and detectors, allowing customization of the security system to suit specific needs.

  • Four programmable outputs for controlling external devices like sirens, lights, or gates, enabling automated responses to alarm events.

  • Two configurable partitions that allow independent arming and disarming of different areas within the premises, providing flexibility and convenience.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents