2. Omnitron Systems Technology
  3. iConverter XM5 NID Rack Mount Shelf

Omnitron Systems Technology iConverter XM5 NID Rack Mount Shelf Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Omnitron Systems Technology iConverter XM5 NID Rack Mount Shelf Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1U 19” iConverter
®
XM5 NID Rack Mount Shelf
User Manual
PRODUCT OVERVIEW
The 1U 19” rack mount shelf accommodates two iConverter
®
XM5 Network Interface Devices
(NIDs).
1U Rack Mount Shelf
INSTALLATION PROCEDURE
1) Unpacking, Visual Inspection and Inventory
2) Rack Mounting
3) General Installation
4) Installing iConverter XM5 NIDs to the Shelf
1) UNPACKING, VISUAL INSPECTION AND INVENTORY
Review the contents. The following items should be included:
• 1URackMountShelf • UserManual
• Four(4)Mountingbrackets • Eight(8)#4-401/4”Flatheadscrews
2) RACK MOUNTING
Mount and attach the shelf to the 19” standard rack using the appropriate rack mounting
screws (not included).
Whenrack-mountingtheshelf,therackshouldbeappropriatelyearthgrounded.Theshelf
providesNEBSgroundpoststosecureagroundinglugfromtheracktotheshelf.
040-08261-001A12/15
Page 1
OmnitronSystemsTechnology,Inc.*38Tesla*Irvine*CA92618
Tel949.250.6510*Fax949.250.6514*www.omnitron-systems.com
3) GENERAL INSTALLATION
Install the mounting brackets to the side of the XM5 using the supplied screws.
iConverter XM5 NIDs with mounting bracket
Removeanyrubberfeetbeforeinstallingthemodule/chassistotheshelf.
4) INSTALLING ICONVERTER XM5 NIDS TO THE SHELF
Slide the XM5 into the mounting guide slots on the shelf.
Installing iConverter XM5 NIDs on the Shelf
ContinuetoslidetheXM5untilitisushwiththefrontmountbracketontheshelf.Secure
the XM5 by fastening the thumbscrew (push in and turn clockwise to tighten) to the shelf.
XM5 NIDs Installed in the Shelf
Embedded cable tie down slots secure the power cord(s) and data cable(s) totheshelf
(cable ties not included).
Page 2 Page 3
General and Copyright Notice
Thispublicationisprotected byU.S. andinternational copyrightlaws.All rightsreserved.The
whole or any part of this publication may not be reproduced, stored in a retrieval system,
translated, transcribed, or transmitted, in any form, or by any means, manual, electric, electronic,
electromagnetic,mechanical,chemical,opticalorotherwise,withoutpriorexplicitwrittenpermission
of Omnitron Systems Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.: FlexPoint
TM
,
HybridNID
®
, iConverter
®
, miConverter
TM
, NetOutlook
®
, OmniLight
TM
, OmniConverter
TM
, Omnitron
Systems Technology, Inc.
TM
, OST
TM
and the Omnitron logo.
Allothercompanyorproductnamesmaybetrademarksoftheirrespectiveowners.
The information contained in this publication is subject to change without notice. Omnitron Systems
Technology, Inc. is not responsible for any inadvertent errors.
Warranty
This product is warranted to the original purchaser against defects in material and workmanship
foraperiodoftwo(2)yearsfromthedateofshipment.ALIFETIMEwarrantymaybeobtainedby
theoriginalpurchaserbyregisteringthisproductwithinninety(90)daysfromthedateofshipment
atwww.omnitron-systems.com/support.Duringthewarrantyperiod,Omnitronwill,atitsoption,
repair or replace a product which is proven to be defective with the same product or with a product
with at least the same functionality.
For warrantyservice, the product must be sent toan Omnitron designated facility, at Buyer’s
expense.OmnitronwillpaytheshippingchargetoreturntheproducttoBuyer’sdesignatedUS
addressusingOmnitron’sstandardshippingmethod.
Limitation of Warranty
Theforegoingwarrantyshallnotapplytodefectsresultingfromimproperorinadequateuseand/
ormaintenanceoftheequipmentbyBuyer,Buyer-suppliedequipment,Buyer-suppliedinterfacing,
unauthorizedmodicationsortamperingwithequipment(includingremovalofequipmentcoverby
personnelnotspecicallyauthorizedandcertiedbyOmnitron),ormisuse,oroperatingoutsidethe
environmentalspecicationoftheproduct(includingbutnotlimitedtovoltage,ambienttemperature,
radiation, unusual dust, etc.), or improper site preparation or maintenance.
Nootherwarrantyisexpressedorimplied.Omnitronspecicallydisclaimstheimpliedwarranties
ofmerchantabilityandtnessforanyparticularpurpose.
TheremediesprovidedhereinaretheBuyer’ssoleandexclusiveremedies.Omnitronshallnot
be liable for any direct, indirect, special, incidental, or consequential damages, whether based on
contract, tort, or any legal theory.
Environmental Notices
TheequipmentcoveredbythismanualmustbedisposedofinaccordancewithDirective2002/96/
EC of the European Parliament and of the council of 27 January 2003 on waste electrical
and electronic equipment (WEEE). Such disposal must follow national legislation for IT and
TelecommunicationequipmentinaccordancewiththeWEEEdirective:(a)Donotdisposewaste
equipment with unsorted municipal and household waste. (b) Collect equipment waste separately.
(c) Return equipment using collection method agreed with Omnitron.
The equipment ismarkedwith the WEEE symbol shown to indicate that it must be
collected separately from other types of waste. In case of small items the symbol may
be printed only on the packaging or in this manual. If you have questions regarding the
correct disposal ofequipmentgo to www.omniton-systems.com/support or e-mail to
Omnitronat[email protected].
©2015OmnitronSystemsTechnology,Inc.
/