Architectural Mailboxes 5114Z Installation guide

Type
Installation guide

This manual is also suitable for

www.architecturalmailboxes.com (800) 464-7491
Your new spreader plate is designed to be used with other
Architectural Mailboxes products only. Please follow these simple
steps to assemble the components of your mailbox system.
Spreader Plate (Models 5112, 5113, 5114) - Mounting Instructions
Mounting your new spreader plate
Thank you for purchasing this spreader plate accessory for your premium Mailboxes or Drop
Boxes. We know you'll be satisfied with the years of service it will provide. If you have any
questions about how to mount or use this spreader plate, or if you need any replacement parts,
please call us directly at (800) 464-7491 or contact us at www.architecturalmailboxes.com.
3
1
Mount the post in the
ground as described in the
instructions that came with
your Mailbox or Drop Box.
© 2007, Architectural Mailboxes Rev. D
Assemble your Mailboxes or Drop Boxes
to the spreader plate as shown, using the
hardware included with the spreader plate.
mailbox bottom
2
Mount the spreader
plate to the top of the
post as shown, using
the hardware included
with your Post.
!
WARNING - Spreader Plates not for use with
products from any other manufacturer - may
collapse. Designed to support the weight of
Architectural Mailboxes products only.
ARCHITECTURAL MAILBOXES
  • Page 1 1

Architectural Mailboxes 5114Z Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI