10
2.3 Installation of remote antennas
To install remote antennas use the AT 70 or AT 90 T. Both antennas can be mounted to the wall by
using the MS 10 wall mount bracket or onto a standard microphone stand. For connecting use high
quality coaxial cables which should be as short as possible. For optimal reception make sure that the
antenna is positioned above the audience and away from obstacles.
3. Important Note
The combiner operates in the frequency range between 600 and 900 MHz. It works with any transmitter
within this range. For optimal transmission make sure that the transmitting antenna operates in the
same frequency band as the transmitter. We recommend using the AT 90 T or AT 70 antenna to
connect to the AD 808 combiner. For connecting use 50 ohms coaxial cables which are not longer than
10 metres.
AT 90 T
MS 10
Remote antenna with wall mount bracket Remote antenna mounted onto a stand
Remote antenna mounted onto a stand
AT 70
4. Disposal
This symbol on the product, in the instructions or on the packaging means that your electrical
and electronic equipment should be disposed at the end of its life separately from your
household waste. There are separate collection systems for recycling in the EU. For more
information, please contact the local authority or your retailer where you purchased the
product.
