Aruba JH103A Reference guide

HPE FlexFabric 12900E Switch Series

VXLAN Command Reference

Software

version: Release 5210

Document version: 6W100-20230424

The information contained herein is subject to change without notice. The only warranties for Hewlett Packard

Enterprise products and services are set forth in the express warranty statements accompanying such

products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett

Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or

copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software

Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s

standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard

Enterprise has no control over and is not responsible for information outside the Hewlett Packard Enterprise

website.

Acknowledgments

Intel®, Itanium®, Pentium®, Intel Inside®, and the Intel Inside logo are trademarks of Intel Corporation in the

United States and other countries.

Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated.

Java and Oracle are registered trademarks of Oracle and/or its affiliates.

UNIX® is a registered trademark of The Open Group.

i

Contents

Basic VXLAN commands ··············································································· 1

arp suppression enable ······························································································································ 1

arp suppression mode ································································································································ 1

description ·················································································································································· 2

display arp suppression vsi ························································································································ 3

display ipv6 nd suppression vsi·················································································································· 4

display l2vpn drni arp ································································································································· 5

display l2vpn drni arp suppression ············································································································· 6

display l2vpn drni mac-address ·············································································································· 7

display l2vpn drni nd ·································································································································· 8

display l2vpn drni nd suppression ············································································································ 10

display l2vpn forwarding ac ······················································································································ 11

display l2vpn mac-address ······················································································································· 12

display l2vpn service-instance ················································································································· 14

display l2vpn vsi ······································································································································· 16

display statistic mode ······························································································································· 20

display vxlan tunnel ·································································································································· 20

encapsulation ··········································································································································· 21

flooding disable ········································································································································ 23

ipv6 nd suppression enable ····················································································································· 24

ipv6 nd suppression mode ······················································································································· 25

l2vpn drni peer-link ac-match-rule vxlan-mapping ··················································································· 26

l2vpn enable ············································································································································· 27

l2vpn statistics interval ····························································································································· 27

mac-address static vsi ······························································································································ 28

ping vxlan ················································································································································· 29

reserved vxlan ·········································································································································· 32

reset arp suppression vsi ························································································································· 33

reset ipv6 nd suppression vsi ··················································································································· 33

reset l2vpn mac-address ·························································································································· 34

reset l2vpn statistics ac ···························································································································· 34

reset l2vpn statistics vsi ··························································································································· 35

rewrite inbound tag ··································································································································· 35

rewrite outbound tag ································································································································ 36

selective-flooding mac-address ················································································································ 38

service-instance ······································································································································· 38

shutdown ·················································································································································· 39

statistic mode ··········································································································································· 40

statistics enable (Ethernet service instance view)···················································································· 40

statistics enable (VSI view) ······················································································································ 41

tracert vxlan ·············································································································································· 42

tunnel ······················································································································································· 44

tunnel global source-address ··················································································································· 45

vsi ····························································································································································· 46

vxlan ························································································································································· 46

vxlan default-decapsulation······················································································································ 47

vxlan invalid-vlan-tag discard ··················································································································· 48

vxlan ipv6 default-decapsulation ············································································································· 48

vxlan local-mac report ······························································································································ 49

vxlan mapping-ecn enable ······················································································································· 50

vxlan tunnel mac-learning disable ············································································································ 51

vxlan udp-port ·········································································································································· 51

xconnect vsi ············································································································································· 52

VXLAN IP gateway commands ···································································· 54

arp distributed-gateway dynamic-entry synchronize ················································································ 54

arp send-rate ············································································································································ 54

ii

display interface vsi-interface ··················································································································· 55

distributed-gateway local ·························································································································· 58

gateway subnet ········································································································································ 58

gateway vsi-interface ······························································································································· 59

interface vsi-interface ······························································································································· 60

ipv6 nd distributed-gateway dynamic-entry synchronize·········································································· 61

mac-address ············································································································································ 61

vtep group member local ·························································································································· 62

vtep group member remote ······················································································································ 62

vxlan tunnel arp-learning disable ············································································································· 63

vxlan tunnel nd-learning disable··············································································································· 64

Document conventions and icons ································································ 65

Conventions ····················································································································································· 65

Network topology icons ···································································································································· 66

Support and other resources ······································································· 67

Accessing Hewlett Packard Enterprise Support······························································································· 67

Accessing updates ··········································································································································· 67

Websites ·················································································································································· 68

Customer self repair ································································································································· 68

Remote support ········································································································································ 68

Documentation feedback ························································································································· 68

Index ············································································································ 70

1

Basic VXLAN commands

arp suppression enable

Use arp suppression enable to enable ARP flood suppression.

Use undo arp suppression enable to disable ARP flood suppression.

Syntax

arp suppression enable [ no-broadcast ]

undo arp suppression enable

Default

ARP flood suppression is disabled.

Views

VSI view

Predefined user roles

network-admin

Parameters

no-broadcast: Disables flooding the ARP requests that do not match any ARP flood suppression

entries.

Usage guidelines

ARP flood suppression reduces ARP request broadcasts by enabling the VTEP to reply to ARP

requests on behalf of VMs.

This feature snoops ARP packets to populate the ARP flood suppression table with local and remote

MAC addresses. If an ARP request has a matching entry, the VTEP replies to the request on behalf

of the VM. If no match is found, the VTEP floods the request to both local and remote sites.

Examples

# Enable ARP flood suppression for VSI vsi1.

<Sysname> system-view

[Sysname] vsi vsi1

[Sysname-vsi-vsi1] arp suppression enable

Related commands

display arp suppression vsi

reset arp suppression vsi

arp suppression mode

Use arp suppression mode to set the ARP flood suppression mode.

Use undo arp suppression mode to restore the default.

Syntax

arp suppression mode { proxy-reply | unicast-forward }

[ mismatch-discard ]

undo arp suppression mode

2

Default

If ARP flood suppression is enabled, the default ARP flood suppression mode is proxy reply. In proxy

reply mode, the device broadcasts the ARP requests that are not targeted at the device and do not

match any ARP flood suppression entries.

Views

VSI view

Predefined user roles

network-admin

Parameters

proxy-reply: Specifies proxy reply mode. If an ARP request is not targeted at the device and

matches an ARP flood suppression entry, the device replies to the ARP request on behalf of the

target IP address. The ARP reply carries the following information:

•

Sender IP address—Target IP address in the ARP request.

•

Sender MAC address—MAC address in the matching ARP flood suppression entry.

•

Source MAC address—MAC address in the matching ARP flood suppression entry.

unicast-forward: Specifies unicast forwarding mode. If an ARP request is not targeted at the

device and matches an ARP flood suppression entry, the device acts as follows:

1. Replaces the target MAC address and destination MAC address in the ARP request with the

MAC address in the entry.

2. Unicasts the ARP request.

mismatch-discard: Specifies mismatch discarding mode. In this mode, the device discards an

ARP request that is not targeted at the device and does not match any ARP flood suppression entry.

If you do not specify this keyword, the device will broadcast such an ARP request.

Usage guidelines

The device does not forward ARP requests in proxy reply mode, which decreases system resource

consumption. Unicast forwarding mode reduces the ARP entry learning errors caused by the delay in

refreshing ARP flood suppression entries at the expense of high system resource usage.

Examples

# Enable ARP flood suppression and set its mode to unicast forwarding on VSI vsi1.

<Sysname> system-view

[Sysname] vsi vsi1

[Sysname-vsi-vsi1] arp suppression enable

[Sysname-vsi-vsi1] arp suppression mode unicast-forward

Related commands

arp suppression enable

description

Use description to configure a description for a VSI.

Use undo description to restore the default.

Syntax

description text

undo description

3

Default

A VSI does not have a description.

Views

VSI view

Predefined user roles

network-admin

Parameters

text: Specifies a description, a case-sensitive string of 1 to 80 characters.

Examples

# Configure a description for VSI vpn1.

<Sysname> system-view

[Sysname] vsi vpn1

[Sysname-vsi-vpn1] description vsi for vpn1

Related commands

display l2vpn vsi

display arp suppression vsi

Use display arp suppression vsi to display ARP flood suppression entries.

Syntax

display arp suppression vsi [ name vsi-name ] [ slot slot-number ] [ count ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

name vsi-name: Specifies a VSI by its name, a case-sensitive string of 1 to 31 characters. If you

do not specify a VSI, this command displays entries for all VSIs.

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command

displays entries on the active MPU.

count: Displays the number of ARP flood suppression entries that match the command.

Examples

# Display ARP flood suppression entries.

<Sysname> display arp suppression vsi

IP address MAC address VSI name Link ID Aging(min)

1.1.1.2 000f-e201-0101 vsi1 0x70000 14

1.1.1.3 000f-e201-0202 vsi1 0x80000 18

1.1.1.4 000f-e201-0203 vsi2 0x90000 10

# Display the number of ARP flood suppression entries.

<Sysname> display arp suppression vsi count

Total entries: 3

4

Table 1 Command output

Field

Description

Link ID Link ID that uniquely identifies an AC or a VXLAN tunnel on a VSI.

Aging Remaining lifetime (in minutes) of the ARP flood suppression entry. When

the timer expires, the entry is deleted.

Related commands

arp suppression enable

reset arp suppression vsi

display ipv6 nd suppression vsi

Use display ipv6 nd suppression vsi to display ND flood suppression entries.

Syntax

display ipv6 nd suppression vsi [ name vsi-name ] [ slot slot-number ]

[ count ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

name vsi-name: Specifies a VSI by its name, a case-sensitive string of 1 to 31 characters. If you

do not specify a VSI, this command displays entries for all VSIs.

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command

displays entries on the active MPU.

count: Displays the number of ND flood suppression entries that match the command.

Examples

# Display ND flood suppression entries.

<Sysname> display ipv6 nd suppression vsi

IPv6 address MAC address VSI name Link ID Aging (min)

1000::2 000f-e201-0101 vsi1 0x70000 5

1000::3 000f-e201-0202 vsi1 0x80000 5

1000::4 000f-e201-0203 vsi2 0x90000 5

# Display the number of ND flood suppression entries.

<Sysname> display ipv6 nd suppression vsi count

Total entries: 3

Table 2 Command output

Field

Description

Link ID Link ID that uniquely identifies an AC or a VXLAN tunnel on a VSI.

Aging (min) Remaining lifetime (in minutes) of the ND flood suppression entry. When the

timer expires, the entry is deleted.

5

Related commands

ipv6 nd suppression enable

reset ipv6 nd suppression vsi

display l2vpn drni arp

Use display l2vpn drni arp to display L2VPN ARP entries on a DR member device.

Syntax

display l2vpn drni arp [ local | remote ] [ count | { public-instance |

vpn-instance vpn-instance-name } [ count | ip-address ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

local: Specifies locally learned L2VPN ARP entries.

remote: Specifies DRNI-synchronized L2VPN ARP entries.

count: Displays the number of L2VPN ARP entries. If you do not specify this keyword, the

command displays detailed information about L2VPN ARP entries.

public-instance: Specifies the public instance.

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a

case-sensitive string of 1 to 31 characters.

ip-address: Specifies an IPv4 address. If you do not specify an IPv4 address, this command

displays all L2VPN ARP entries that match the specified criteria.

Usage guidelines

If you do not specify the local or remote keyword, this command displays both locally learned

and DRNI-synchronized L2VPN ARP entries.

If you do not specify the public-instance keyword or the vpn-instance

vpn-instance-name option, this command displays L2VPN ARP entries for the public instance

and all VPN instances.

Examples

# Display all L2VPN ARP entries on the local DR member device.

<Sysname> display l2vpn drni arp

Flags: D – Dynamic L - Local R – Remote S – Static I - Invalid

G - Gateway V - DRNI Virtual

VPN instance: vpn1 Interface: Vsi-interface1

IP address MAC address VSI index Link ID Flags

10.1.1.1 0003-0003-0003 0 0x1 DL

10.1.1.11 0001-0001-0001 0 0x1 DL

10.1.1.12 0001-0001-0011 0 0x2 DR

10.1.1.13 0001-0001-0021 0 0x2 DR

6

10.1.1.101 0001-0011-0101 0 0x1 SL

10.1.1.102 0001-0011-0102 0 0x1 SL

Public instance Interface: Vsi-interface2

IP address MAC address VSI index Link ID Flags

11.1.1.1 0033-0033-0033 0 0x1 DL

11.1.1.11 0011-0011-0011 0 0x1 DL

# Display the total number of L2VPN ARP entries on the local DR member device.

<Sysname> display l2vpn drni arp count

Total number of entries: 8

Table 3 Command output

Field

Description

Interface VSI interface.

Link ID Link ID that uniquely identifies an AC or a VXLAN tunnel on a VSI.

Flags

ARP entry type:

• D—The entry is a valid dynamically learned entry.

• L—The entry is a valid local entry.

• R—The entry is a valid DRNI-synchronized entry.

• S—The entry is a valid static entry.

• I—The entry is invalid. Possible reasons:

 The VSI has been administratively shut down by using the

shutdown command.

 The outgoing tunnel interface does not exist.

• G—The entry is for a gateway.

• V—The entry is for the DRNI virtual IPv4 address of a gateway

interface.

display l2vpn drni arp suppression

Use display l2vpn drni arp suppression to display L2VPN ARP flood suppression entries

on a DR member device.

Syntax

display l2vpn drni arp suppression [ local | remote ] [ count | vsi vsi-name

[ count | ip-address ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

local: Specifies L2VPN ARP flood suppression entries that are learned locally.

remote: Specifies L2VPN ARP flood suppression entries that are synchronized by DRNI.

count: Displays the number of L2VPN ARP flood suppression entries. If you do not specify this

keyword, the command displays detailed information about L2VPN ARP flood suppression entries.

7

vsi vsi-name: Specifies a VSI name, a case-sensitive string of 1 to 31 characters. If you do not

specify a VSI, this command displays L2VPN ARP flood suppression entries for all VSIs.

ip-address: Specifies an IPv4 address. If you do not specify an IPv4 address, this command

displays all L2VPN ARP flood suppression entries that match the specified criteria.

Usage guidelines

If you do not specify the local or remote keyword, this command displays both locally learned

and DRNI-synchronized L2VPN ARP flood suppression entries.

Examples

# Display all L2VPN ARP flood suppression entries on the local DR member device.

<Sysname> display l2vpn drni arp suppression

Flags: D - Dynamic L – Local R – Remote S - Static I – Invalid

VSI name: vpna

IP address MAC address Link ID Flags

10.1.1.12 0002-0002-0002 0x1 DL

10.1.1.13 0002-0002-0002 0x2 RI

10.1.1.101 0001-0011-0101 0x2 SR

# Display the total number of L2VPN ARP flood suppression entries on the local DR member device.

<Sysname> display l2vpn drni arp suppression count

Total number of entries: 3

Table 4 Command output

Field

Description

Link ID Link ID that uniquely identifies an AC or a VXLAN tunnel on a VSI.

Flags

ARP flood suppression entry type:

• D—The entry is a valid dynamically learned entry.

• L—The entry is a valid local entry.

• R—The entry is a valid DRNI-synchronized entry.

• S—The entry is a valid static entry.

• I—The entry is invalid. Possible reasons:

 The VSI has been administratively shut down by using the

shutdown command.

 The outgoing tunnel interface does not exist.

display l2vpn drni mac-address

Use display l2vpn drni mac-address to display L2VPN MAC address entries on a DR

member device.

Syntax

display l2vpn drni mac-address [ local | remote ] [ count | vsi vsi-name

[ count | mac-address ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

8

Parameters

local: Specifies L2VPN MAC address entries that are learned locally.

remote: Specifies L2VPN MAC address entries that are synchronized by DRNI.

count: Displays the number of L2VPN MAC address entries. If you do not specify this keyword, the

command displays detailed information about L2VPN MAC address entries.

vsi vsi-name: Specifies a VSI name, a case-sensitive string of 1 to 31 characters. If you do not

specify a VSI, this command displays L2VPN MAC address entries for all VSIs.

mac-address: Specifies a MAC address. The MAC address is in the format of H-H-H. You can omit

the consecutive zeros at the beginning of each segment. For example, you can enter f-e2-1 for

000f-00e2-0001. If you do not specify a MAC address, this command displays all L2VPN MAC

address entries that match the specified criteria.

Usage guidelines

If you do not specify the local or remote keyword, this command displays both locally learned

and DRNI-synchronized L2VPN MAC address entries.

Examples

# Display all L2VPN MAC address entries on the local DR member device.

<Sysname> display l2vpn drni mac-address

Flags: D – Dynamic L - Local R – Remote S – Static A - MAC-authentication

VSI name: bbb

MAC address Link ID Interface Flags

0000-0000-000a 0x1 BAGG10 DL

0000-0000-0009 0x1 Tunnel1 DL

# Display the total number of L2VPN MAC address entries on the local DR member device.

<Sysname> display l2vpn drni mac-address count

Total number of entries: 2

Table 5 Command output

Field

Description

Link ID Link ID that uniquely identifies an AC or a VXLAN tunnel on a VSI.

Interface Outgoing interface.

Flags

MAC address entry type:

• D—The entry is a valid dynamically learned entry.

• L—The entry is a valid local entry.

• R—The entry is a valid DRNI-synchronized entry.

• S—The entry is a valid static entry.

• A—The entry is learned by MAC authentication.

display l2vpn drni nd

Use display l2vpn drni nd to display L2VPN ND entries on a DR member device.

Syntax

display l2vpn drni nd [ local | remote ] [ count | { public-instance |

vpn-instance vpn-instance-name } [ ipv6-address | count ] ]

9

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

local: Specifies locally learned L2VPN ND entries.

remote: Specifies DRNI-synchronized L2VPN ND entries.

count: Displays the number of L2VPN ND entries. If you do not specify this keyword, the command

displays detailed information about L2VPN ND entries.

public-instance: Specifies the public instance.

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a

case-sensitive string of 1 to 31 characters.

ipv6-address: Specifies an IPv6 address. If you do not specify an IPv6 address, this command

displays all L2VPN ND entries that match the specified criteria.

Usage guidelines

If you do not specify the local or remote keyword, this command displays both locally learned

and DRNI-synchronized L2VPN ND entries.

If you do not specify the public-instance keyword or the vpn-instance

vpn-instance-name option, this command displays L2VPN ND entries for the public instance

and all VPN instances.

Examples

# Display all L2VPN ND entries on the local DR member device.

<Sysname> display l2vpn drni nd

Flags: D - Dynamic L – Local R – Remote S - Static I - Invalid

G - Gateway V - DRNI Virtual

VPN instance: vpna Interface: Vsi-interface1

IPv6 address : 20::2

MAC address : 0001-0001-0001 Flags : DL

VSI index : 0 Link ID : 0x1

# Display the total number of L2VPN ND entries on the local DR member device.

<Sysname> display l2vpn drni nd count

Total number of entries: 1

Table 6 Command output

Field

Description

Interface VSI interface.

Flags

ND entry type:

• D—The entry is a valid dynamically learned entry.

• L—The entry is a valid local entry.

• R—The entry is a valid DRNI-synchronized entry.

• S—The entry is a valid static entry.

• I—The entry is invalid. Possible reasons:

10

Field

Description



The VSI has been administratively shut down by using the

shutdown command.

 The outgoing tunnel interface does not exist.

• G—The entry is for a gateway.

• V—The entry is for the DRNI virtual IPv6 address of a gateway

interface.

Link ID Link ID that uniquely identifies an AC or a VXLAN tunnel on a VSI.

display l2vpn drni nd suppression

Use display l2vpn drni nd suppression to display L2VPN ND flood suppression entries on

a DR member device.

Syntax

display l2vpn drni nd suppression [ local | remote ] [ count | vsi vsi-name

[ ipv6-address | count ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

local: Specifies L2VPN ND flood suppression entries that are learned locally.

remote: Specifies L2VPN ND flood suppression entries that are synchronized by DRNI.

count: Displays the number of L2VPN ND flood suppression entries. If you do not specify this

keyword, the command displays detailed information about L2VPN ND flood suppression entries.

vsi vsi-name: Specifies a VSI name, a case-sensitive string of 1 to 31 characters. If you do not

specify a VSI, this command displays L2VPN ND flood suppression entries for all VSIs.

ipv6-address: Specifies an IPv6 address. If you do not specify an IPv6 address, this command

displays all L2VPN ND flood suppression entries that match the specified criteria.

Usage guidelines

If you do not specify the local or remote keyword, this command displays both locally learned

and DRNI-synchronized L2VPN ND flood suppression entries.

Examples

# Display all L2VPN ND flood suppression entries on the local DR member device.

[Sysname]display l2vpn drni nd suppression

Flags: D - Dynamic L – Local R – Remote S - Static I - Invalid

VSI name: vpna

IPv6 address MAC address Link ID Flags

11::8 72cb-ce9b-0a06 0x1 DL

11::9 0001-0001-0001 0x2 SR

# Display the total number of L2VPN ND flood suppression entries on the local DR member device.

<Sysname> display l2vpn drni nd suppression count

Total number of entries: 2

11

Table 7 Command output

Field

Description

Link ID Link ID that uniquely identifies an AC or a VXLAN tunnel on a VSI.

Flags

ND flood suppression entry type:

• D—The entry is a valid dynamically learned entry.

• L—The entry is a valid local entry.

• R—The entry is a valid DRNI-synchronized entry.

• S—The entry is a valid static entry.

• I—The entry is invalid. Possible reasons:

 The VSI has been administratively shut down by using the

shutdown command.

 The outgoing tunnel interface does not exist.

display l2vpn forwarding ac

Use display l2vpn forwarding ac to display L2VPN AC forwarding information.

Syntax

display l2vpn forwarding ac [ vsi vsi-name ] [ slot slot-number ] [ verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

vsi vsi-name: Displays L2VPN forwarding information for a VSI. The vsi-name argument

specifies the VSI name, a case-sensitive string of 1 to 31 characters. If you do not specify a VSI, this

command displays L2VPN forwarding information for all VSIs.

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command

displays L2VPN forwarding information for the active MPU.

verbose: Displays detailed information. If you do not specify this keyword, the command displays

brief information.

Examples

# Display brief AC forwarding information for all VSIs.

<Sysname> display l2vpn forwarding ac

Total number of VSIs: 1

Total number of ACs: 1 up, 0 down

AC VSI Name Link ID State

BAGG1 srv1 1 0x1 Up

Table 8 Command output

Field

Description

Total number of VSIs Total number of VSIs, including VSIs that are not bound to any ACs.

12

Field

Description

Total number of ACs Total number of attachment circuits (ACs) and the number of ACs in each state

(up or down).

AC AC type, Layer 2 interface and Ethernet service instance.

Link ID Link ID of the AC in the VSI.

State Ethernet service instance state:

• Up.

• Down.

# Display detailed AC forwarding information for all VSIs.

<Sysname> display l2vpn forwarding ac verbose

VSI Name: vpls2

Interface: HGE1/0/3 Service Instance: 4

Link ID : 1

Access Mode : VLAN

State : UP

Encapsulation: s-vid 10

Type : Manual

Table 9 Command output

Field

Description

Service Instance Ethernet service instance ID.

Link ID Link ID of the AC in the VSI.

Access Mode AC access mode:

• VLAN.

• Ethernet.

State AC state.

Encapsulation Frame match criterion of the Ethernet service instance.

Type

Type and traffic match mode of the Ethernet service instance:

• Dynamic (DRNI)—Dynamic Ethernet service instance created on the IPL, in

VLAN-based traffic match mode.

• Manual—Static Ethernet service instance in VLAN-based traffic match mode.

display l2vpn mac-address

Use display l2vpn mac-address to display MAC address entries for VSIs.

Syntax

display l2vpn mac-address [ vsi vsi-name ] [ dynamic ] [ count | verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

13

Parameters

vsi vsi-name: Specifies a VSI name, a case-sensitive string of 1 to 31 characters. If you do not

specify a VSI, this command displays MAC address entries for all VSIs.

dynamic: Specifies dynamic MAC address entries learned in the data plane. If you do not specify

this keyword, the command displays all MAC address entries, including:

•

Dynamic remote- and local-MAC entries.

•

Remote-MAC entries advertised through BGP EVPN.

•

Manually added static remote- and local-MAC entries.

•

Remote-MAC entries issued through OpenFlow.

count: Displays the number of MAC address entries.

verbose: Displays detailed information about MAC address entries.

Usage guidelines

If you do not specify the count or verbose keyword, this command displays brief information

about MAC address entries.

Examples

# Display brief information about MAC address entries for all VSIs.

<Sysname> display l2vpn mac-address

MAC Address State VSI Name Link ID/Name Aging

0000-0000-000b Static vpn1 Tunnel10 NotAging

0000-0000-000c Dynamic vpn1 Tunnel60 Aging

0000-0000-000d Dynamic vpn1 Tunnel99 Aging

--- 3 mac address(es) found ---

# Display the total number of MAC address entries in all VSIs.

<Sysname> display l2vpn mac-address count

3 mac address(es) found

Table 10 Command output

Field

Description

State

Entry state:

• Dynamic—Local- or remote-MAC entry dynamically learned in the data plane.

• Static—Static local- and remote-MAC entry.

• EVPN—Remote-MAC entry advertised through BGP EVPN.

• OpenFlow—Remote-MAC entry issued by a remote controller through

OpenFlow.

Link ID/Name For a local MAC address, this field displays the name of the interface that hosts the

Ethernet service instance for the MAC address.

For a remote MAC address, this field displays the tunnel interface name.

Aging Entry aging state:

• Aging.

• NotAging.

# Display detailed information about MAC address entries for all VSIs.

<Sysname> display l2vpn mac-address verbose

MAC Address : 0000-0000-000b

VSI Name : vpn1

VXLAN ID : 123

14

Interface : HGE1/0/1

Link ID : 1

State : Dynamic

Aging : Aging

Table 11 Command output

Field

Description

Interface For a local MAC address, this field displays the name of the interface that hosts the

Ethernet service instance for the MAC address.

For a remote MAC address, this field displays the tunnel interface name.

Link ID Link ID that uniquely identifies an AC or a VXLAN tunnel on a VSI.

State

Entry state:

• Dynamic—Local- or remote-MAC entry dynamically learned in the data plane.

• Static—Static local- or remote-MAC entry.

• EVPN—Remote-MAC entry advertised through BGP EVPN.

• OpenFlow—Remote-MAC entry issued by a remote controller through

OpenFlow.

Aging Entry aging state:

• Aging.

• NotAging.

Related commands

reset l2vpn mac-address

display l2vpn service-instance

Use display l2vpn service-instance to display information about Ethernet service

instances.

Syntax

display l2vpn service-instance [ interface interface-type

interface-number [ service-instance instance-id ] ] [ verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface interface-type interface-number: Specifies a Layer 2 Ethernet interface or

Layer 2 aggregate interface by its interface type and number. If you do not specify an interface, this

command displays Ethernet service instance information for all Layer 2 Ethernet interfaces and

Layer 2 aggregate interfaces.

service-instance instance-id: Specifies an Ethernet service instance by its ID in the range

of 1 to 4096. If you do not specify an Ethernet service instance, this command displays information

about all Ethernet service instances on the specified Layer 2 Ethernet interface or Layer 2 aggregate

interface.

verbose: Displays detailed information about Ethernet service instances. If you do not specify this

keyword, the command displays brief information about Ethernet service instances.

15

Examples

# Display brief information about all Ethernet service instances.

<Sysname> display l2vpn service-instance

Total number of service-instances: 1, 0 up, 1 down

Total number of ACs: 1, 0 up, 1 down

Interface SrvID Owner LinkID

State Type

BAGG1 1 1 1

Down VSI

Table 12 Command output

Field

Description

Total number of ACs Total number of attachment circuits (ACs) and the number of ACs in each state

(up or down).

Interface Name of a Layer 2 Ethernet interface or Layer 2 aggregate interface.

SrvID Ethernet service instance ID.

Owner VSI name. This field is empty if an Ethernet service instance is not mapped to

any VSI.

LinkID Ethernet service instance's link ID on the VSI.

State Ethernet service instance state:

• Up.

• Down.

Type L2VPN type of the Ethernet service instance:

• VSI.

• VPWS.

# Display detailed information about all Ethernet service instances on HundredGigE 1/0/1.

<Sysname> display l2vpn service-instance interface hundredgige 1/0/1 verbose

Interface: HGE1/0/1

Service Instance: 1

Type : Manual

Encapsulation : s-vid 16

VSI Name : vsi10

Link ID : 1

State : Up

Statistics : Enabled

Input Statistics:

Octets :0

Packets :0

Errors : 0

Discards: 0

Output Statistics:

Octets :0

Packets :0

Errors : 0

Discards: 0

16

Table 13 Command output

Field

Description

Interface Name of a Layer 2 Ethernet interface or Layer 2 aggregate interface.

Service Instance Ethernet service instance ID.

Type

Type and traffic match mode of the Ethernet service instance:

• Dynamic (DRNI)—Dynamic Ethernet service instance created on the IPL, in

VLAN-based traffic match mode.

•

Manual

—Static Ethernet service instance in VLAN-based traffic match mode.

Encapsulation Frame match criterion of the Ethernet service instance. If the Ethernet service

instance does not contain a match criterion, the command does not display this field.

Link ID Ethernet service instance's link ID on the VSI.

State Ethernet service instance state:

• Up.

• Down.

Statistics

Packet statistics state:

• Enabled—The packet statistics feature is enabled for the Ethernet service

instance.

• Disabled—The packet statistics feature is disabled for the Ethernet service

instance.

Input statistics

Incoming traffic statistics:

• Octets—Number of incoming bytes.

• Packets—Number of incoming packets.

• Errors—Number of error packets.

• Discards—Number of discarded packets.

Output statistics

Outgoing traffic statistics:

• Octets—Number of outgoing bytes.

• Packets—Number of outgoing packets.

• Errors—Number of error packets.

• Discards—Number of discarded packets.

Related commands

service-instance

display l2vpn vsi

Use display l2vpn vsi to display information about VSIs.

Syntax

display l2vpn vsi [ name vsi-name | evpn-srv6 | evpn-vpls | evpn-vxlan |

vxlan ] [ count | verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

Page is loading ...

Aruba JH103A Reference guide

This manual is also suitable for

Aruba JH103A Reference guide

Related papers

Other documents