JB T20275 Flaring Tool Kit User manual

Brand
JB
Model
T20275 Flaring Tool Kit
Type
User manual
FLARING TOOL KIT INSTRUCTIONS
t20275
T20275 Flaring Kit Instructions • 630.851.9444 • [email protected]
NOTE: These pictures don’t show the flaring nut on the tube.
Please ensure the nut is on the tube prior to flaring.
JB INDUSTRIES
Step 1:
Insert the tube into the proper size fitting on the clamp,
allowing a small length of tube to protrude from the clamp
as shown. Tighten the wing nuts with your hands ensuring
a very tight fit so that the copper tube doesn’t slip while
flaring.
T20275 Flaring Kit Instructions • 630.851.9444 • [email protected]
JB INDUSTRIES
0619
©2019 JB Industries, Inc. Printed in the USA
Step 2:
Slide the flaring cone over the tube as shown.
Step 4:
Remove the flaring cone and loosen the
wing nuts on the clamp. Open the clamp and
remove the tube.
Step 3:
Tighten the flaring cone until it is tight (fully
forming the copper tube into a flare)
Step 5:
Inspect the flared tube for damage or
improper shape.
  • Page 1 1
  • Page 2 2

JB T20275 Flaring Tool Kit User manual

Brand
JB
Model
T20275 Flaring Tool Kit
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents