2. Danfoss
  3. EVR 4, 6 and 8 (EVO 102 and 202) Normally closed/Normally open (NC/NO)

Danfoss EVR 4, 6 and 8 (EVO 102 and 202) Normally closed/Normally open (NC/NO) Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Danfoss EVR 4, 6 and 8 (EVO 102 and 202) Normally closed/Normally open (NC/NO) Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Nm kpm ft-lbs Torx size
1.4 0.15 1 T 15
(NO)
Sticker applies
only to UL products
(NC)
032R9555
(NC flare)
DKRCC.PI.BB0.C1.02-520H5588
032R9555
© Danfoss A/S (AC-SMC / MWA) 09-2011
(NC solder)
Note: Tube
construction
Instruction
EVR 4, 6 and 8 (EVO 102 & EVO 202)
Normally Closed/Normally Open (NC/NO)
Refrigerants CFC, HCFC, HFC
(NO solder)
Dismounting gasket :
Pres and twist
Be sure that the
O-ring is in place
Warning
Never switch on power to
the coil when the coil is
dismounted from the valve.
Otherwise the coil may be
damaged and there is risk
of injuries and burns.
!
Warning
Never switch on power
to the coil when the coil
is dismounted from the
valve. Otherwise the coil
may be damaged and
there is risk of injuries and
burns
Warning
Never switch on power to
the coil when the coil is
dismounted from the valve.
Otherwise the coil may be
damaged and there is risk
of injuries and burns.
!
4.7
1.2
4.2
1.5
Old
New
Warning
Make sure that you use
the new support ring.
/