Everest - 3 wheel strolle
r
Product Guid
e
Please read and follow the instructions outlined in this guide carefully. Retain this guide in
a safe place for future reference!
All pictures and diagrams herein are provided for illustration purposes only. Actual product,
colour or fabric may vary. VALCO reserves the right to modify or alter any specification or
colour without notice or obligation to modify any product previously purchased.
valcovalco
bb
ee
cc
aa
uu
ss
ee
yy
oo
uu
cc
aa
rr
ee
ss
ii
nn
cc
ee
11
99
66
55
Thank you for purchasing a quality VVAALLCCOO product. Due to our policy of continuous product
development, this product is constantly evolving. It is possible that some features or
procedures outlined here have changed since this document was written. If you unsure of
any procedure shown here, please contact us via the web at
[email protected] to obtain
the most up to date information before use. Include the batch number, which can be
found on a sticker the stroller frame.
Before assembling this stroller, please read the instructions carefully.
Familiarize
yourself with the stroller construction and safety features; be
sur
e that you understand all the warnings and safety guidelines before use.
Everest - 3 wheel strolle
r
POWDER COATED
FRAME WITH A SPECIALLY
DESIGNED CONTOURED SHAPE
4 POSITION LAY BACK SYSTEM
& EASY FOLD AWAY FOR
YOUR CONVENIENCE
QUICK RELEASE SPOKE WHEEL
SYSTEM WITH EASY GLIDE
PNEUMATIC TYRES
EASY CARE
LARGE FOOTREST
MAXIMUM PADDED SEAT
FOR YOUR CHILD’S COMFORT
REMOVABLE FRONT BAR
LARGE SPORTS HOOD
TO HELP PROTECT FROM SUN
ONE ACTION BRAKE
MECHANISM
LARGE STORAGE
BASKET
HARNESS COVERS FOR EXTRA
BABY COMFORT
PEEK-A-BOO WINDOW
5 POINT HARNESS & REAR
HEAD BARRIER
CONVENIENT BACK
POCKET FOR MOTHER
& BABY’S NEEDS
REFLECTIVE BINDING
ENHANCES MAXIMUM
SAFETY & VISIBILITY
SECONDARY FRAME LOCK
Remove the contents of the carton carefully; dispose of any packaging material
thoughtfully. Along with the chassis, you will find the following in your stroller carton:
Ca
r
ton Contents
Rear Wheels Front Wheel Footrest “U” section Rear Brake Section
Assembly Instructions
1. On a clean flat surface, open the stroller
frame by lifting the handle upward
(away from the foot section) until it
locks into place.
2. Standing in front of the stroller (with the
2 rear legs on the floor), tilt the front leg
section up toward you.
3. Insert each tube of the footrest “U”
section in turn into each of the front leg
tubes.
4. One leg at a time, depress the spring
loaded button and further insert the “U”
section into the stroller frame until it is
fully locked into place on both sides.
IMPORTANT: Test that the “U” section is
fully engaged in the chassis by pulling it
toward you.
5. Turn the frame upside down on the floor
6. With the brake levers facing AWAY from
the stroller, match the plastic housings
on the Rear Brake section with the rear
stroller legs.
7. Using the same method as in point 4,
secure the Rear Brake Section to the
frame.
Everest - 3 wheel strolle
r
With the stroller facing you , place the plastic track
of the front bar on the inside of the front stroller
tube, at either side of the stroller.
FRONT BAR
INSTALLATION
Secondary Lock
Press
Down
safety harness system.
while in the stroller.
TO SECURE YOUR CHILD IN THE HARNESS:
1. Insert Buckles (A) and (B) into either side of the Buckle Housing (C). Keep
inserting until they click into place securely.
2. Carefully adjust the harness straps to snugly fit your child by adjusting the Sliders
(D) located on all Shoulder Straps, Waist Straps and Crotch Strap.
3. To prevent older children tampering with the strap adjustments and for greater
child comfort, your EVEREST stroller is provided with 2 soft strap covers. To fit,
disengage each shoulder strap from the central buckle housing and thread the
strap through the cover. Re-install the straps to the central buckle housing.
The harness should be snugly fitted to the baby’s body, tight enough so that the
baby cannot wriggle itself free of the straps but loose enough so as not to cause
the baby any discomfort.
TO OPEN THE HARNESS:
1. Release the Buckle Prongs – Squeeze on the top and bottom prongs
simultaneously and pull apart from the Buckle Housing.
This process may be difficult as your buckle system has been designed to meet
very stringent safety standards to ensure that a child cannot release the harness
unaided.
Using your brakes
To engage the brake, push down on
the brake bar with your foot until it
locks into place into the wheel cogs.
WARNING: Always test to check if
the brake is securely engaged.
To release, lift the brake bar upwards
Everest - 3 wheel strolle
r
Using your strolle
r
Your VALCO pram is fitted with a 5 point
Your child MUST always be harnessed
TURN
KNOB
PULL UP
valcovalco
bb
ee
cc
aa
uu
ss
ee
yy
oo
uu
cc
aa
rr
ee
ss
ii
nn
cc
ee
11
99
66
55
/
