Valco baby EVEREST Operating instructions

Brand: Valco baby

Model: EVEREST

Category: Strollers

Type: Operating instructions

Everest - 3 wheel strolle

Product Guid

Please read and follow the instructions outlined in this guide carefully. Retain this guide in

a safe place for future reference!

All pictures and diagrams herein are provided for illustration purposes only. Actual product,

colour or fabric may vary. VALCO reserves the right to modify or alter any specification or

colour without notice or obligation to modify any product previously purchased.

valcovalco

Thank you for purchasing a quality VVAALLCCOO product. Due to our policy of continuous product

development, this product is constantly evolving. It is possible that some features or

procedures outlined here have changed since this document was written. If you unsure of

any procedure shown here, please contact us via the web at

[email protected] to obtain

the most up to date information before use. Include the batch number, which can be

found on a sticker the stroller frame.

Before assembling this stroller, please read the instructions carefully.

Familiarize

yourself with the stroller construction and safety features; be

sur

e that you understand all the warnings and safety guidelines before use.

Everest - 3 wheel strolle

POWDER COATED

FRAME WITH A SPECIALLY

DESIGNED CONTOURED SHAPE

4 POSITION LAY BACK SYSTEM

& EASY FOLD AWAY FOR

YOUR CONVENIENCE

QUICK RELEASE SPOKE WHEEL

SYSTEM WITH EASY GLIDE

PNEUMATIC TYRES

EASY CARE

LARGE FOOTREST

MAXIMUM PADDED SEAT

FOR YOUR CHILD’S COMFORT

REMOVABLE FRONT BAR

LARGE SPORTS HOOD

TO HELP PROTECT FROM SUN

ONE ACTION BRAKE

MECHANISM

LARGE STORAGE

BASKET

HARNESS COVERS FOR EXTRA

BABY COMFORT

PEEK-A-BOO WINDOW

5 POINT HARNESS & REAR

HEAD BARRIER

CONVENIENT BACK

POCKET FOR MOTHER

& BABY’S NEEDS

REFLECTIVE BINDING

ENHANCES MAXIMUM

SAFETY & VISIBILITY

SECONDARY FRAME LOCK

Remove the contents of the carton carefully; dispose of any packaging material

thoughtfully. Along with the chassis, you will find the following in your stroller carton:

ton Contents

Rear Wheels Front Wheel Footrest “U” section Rear Brake Section

Assembly Instructions

1. On a clean flat surface, open the stroller

frame by lifting the handle upward

(away from the foot section) until it

locks into place.

2. Standing in front of the stroller (with the

2 rear legs on the floor), tilt the front leg

section up toward you.

3. Insert each tube of the footrest “U”

section in turn into each of the front leg

tubes.

4. One leg at a time, depress the spring

loaded button and further insert the “U”

section into the stroller frame until it is

fully locked into place on both sides.

IMPORTANT: Test that the “U” section is

fully engaged in the chassis by pulling it

toward you.

5. Turn the frame upside down on the floor

6. With the brake levers facing AWAY from

the stroller, match the plastic housings

on the Rear Brake section with the rear

stroller legs.

7. Using the same method as in point 4,

secure the Rear Brake Section to the

frame.

Everest - 3 wheel strolle

With the stroller facing you , place the plastic track

of the front bar on the inside of the front stroller

tube, at either side of the stroller.

FRONT BAR

INSTALLATION

Secondary Lock

Press

Down

safety harness system.

while in the stroller.

TO SECURE YOUR CHILD IN THE HARNESS:

1. Insert Buckles (A) and (B) into either side of the Buckle Housing (C). Keep

inserting until they click into place securely.

2. Carefully adjust the harness straps to snugly fit your child by adjusting the Sliders

(D) located on all Shoulder Straps, Waist Straps and Crotch Strap.

3. To prevent older children tampering with the strap adjustments and for greater

child comfort, your EVEREST stroller is provided with 2 soft strap covers. To fit,

disengage each shoulder strap from the central buckle housing and thread the

strap through the cover. Re-install the straps to the central buckle housing.

The harness should be snugly fitted to the baby’s body, tight enough so that the

baby cannot wriggle itself free of the straps but loose enough so as not to cause

the baby any discomfort.

TO OPEN THE HARNESS:

1. Release the Buckle Prongs – Squeeze on the top and bottom prongs

simultaneously and pull apart from the Buckle Housing.

This process may be difficult as your buckle system has been designed to meet

very stringent safety standards to ensure that a child cannot release the harness

unaided.

Using your brakes

To engage the brake, push down on

the brake bar with your foot until it

locks into place into the wheel cogs.

WARNING: Always test to check if

the brake is securely engaged.

To release, lift the brake bar upwards

Everest - 3 wheel strolle

Using your strolle

Your VALCO pram is fitted with a 5 point

Your child MUST always be harnessed

TURN

KNOB

PULL UP

valcovalco

Valco baby EVEREST Operating instructions

Brand: Valco baby

Model: EVEREST

Category: Strollers

Type: Operating instructions

Download PDF

report

Valco baby EVEREST Operating instructions

Valco baby EVEREST Operating instructions

Related papers

Other documents