Onyx MD-100Pro User manual

Mobile Tablet PC

MD- 1 0 0 P r o

MD-100Pro

10.1” Mini Bedside Terminal

SAMSUNG S5PV210 1GHz Processor

Ultra Low Power Consumption

Fanless & Compact design

MD-100Pro Manual 1

st

Edition

Dec, 2012

Mobile Tablet PC

MD- 1 0 0 P r o

Copyright Notice

This document is copyrighted, 2012. All rights are reserved. The

original manufacturer reserves the right to make improvements to

the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in

this manual is intended to be accurate and reliable. However, the

original manufacturer assumes no responsibility for its use, nor

for any infringements upon the rights of third parties, which may

result from its use.

The material in this document is for product information only and

is subject to change without notice. While reasonable efforts have

been made in the preparation of this document to assure its

accuracy, ONYX Healthcare Inc., assumes no liabilities resulting

from errors or omissions in this document, or from the use of the

information contained herein

ONYX Healthcare Inc. reserves the right to make changes in the

product design without notice to its users

Mobile Tablet PC

MD- 1 0 0 P r o

Acknowledgments

 SAMSUNG S5PV210 1GHz Process are registered

trademarks of SAMSUNG.

 IBM, PC/AT, PS/2 are trademarks of International Business

Machines Corporation.

 Microsoft

®

Windows is a registered trademark of Microsoft

®

Corporation.

 RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

 C&T is a trademark of Chips and Technologies, Inc.

 UMC is a trademark of United Microelectronics Corporation.

 ITE is a trademark of Integrated Technology Express, Inc.

 SiS is a trademark of Silicon Integrated Systems Corp.

 VIA is a trademark of VIA Technology, Inc.

All other product names or trademarks are properties of their

respective owners.

Mobile Tablet PC

MD- 1 0 0 P r o

Packing List

Before you begin installing your Bedside Terminal, please make

sure that the following items have been shipped:

 MD-100Pro Mobile Tablet PC.

 AC/DC adapter and AC power cord

 Utility CD-ROM (Please insert the MD-100Pro CD-ROM into

external CD-ROM drive.), Drivers and Utilities

If any of these items are missing or damaged, you should contact

your distributor or sales representative immediately.

Headquarters

Onyx Healthcare Inc.

2F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist.,

New Taipei City 231, Taiwan (R.O.C.).

TEL: +886-2-8919-2188

FAX: +886-2-8919-1699

E-mail: sales@onyx-healthcare.com

http://www.onyx-healthcare.com

Worldwide Offices:

Mobile Tablet PC

MD- 1 0 0 P r o

Onyx Healthcare, USA Inc.

2663 Saturn street, Brea, CA 92821, USA

Tel : +1-714-996-1800

Fax: +1-714-996-1811

Email: usasales@onyx-healthcare.com

Onyx Healthcare EUROPE B.V.

Ekkersrijt 4002, 5692 DA Son, The Netherlands

Tel : +31-(0)499-462020

Fax: +31-(0)499-462010

Email: eusales@onyx-healthcare.com

Onyx Healthcare Technology GmbH

An der Trift65d

63303 Dreieich , Germany

TEL: +49-(0)61033-7479-00

Fax: +49-(0)61033-7479-49

Email: eusales@onyx-healthcare.com

Mobile Tablet PC

MD- 1 0 0 P r o

Onyx Healthcare (Nanjing) INC.

Room 1318, Metallurgy Building , East Zhongshan Road,

Nanjing, China

Tel: +86-025-58859841

Fax: +86-025-85088070

Email: Jonwang@onyx-healthcare.com

Onyx Healthcare Singapore PTE LTD

57 Genting Lane, #07-00, Singapore 349564

Tel: +65-67498749

Fax +65-67461595

Email: sgsales@onyx-healthcare.com

Mobile Tablet PC

MD- 1 0 0 P r o

Safety & Warranty

1. Read these safety instructions carefully.

2. Keep this user's manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Do

not use liquid or spray detergents for cleaning. Use a damp cloth.

4. For pluggable equipment, the power outlet must be installed near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping

it or letting it fall could cause damage.

7. The openings on the enclosure are for air convection. Protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before

connecting the equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not

place anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient over-voltage.

12. Never pour any liquid into an opening. This could cause fire or

electrical shock.

13. Never open the equipment. For safety reasons, only qualified service

personnel should open the equipment.

Mobile Tablet PC

MD- 1 0 0 P r o

14. If any of the following situations arises, get the equipment checked

by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to

work according to the user’s manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED

ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS

BELOW -20° C (-4°F) OR ABOVE 60° C (140° F). IT MAY DAMAGE

THE EQUIPMENT.

16. External equipment intended for connection to signal

input/output or other connectors, shall comply with relevant UL

/ IEC standard (e.g. UL 60950-1 for IT equipment and ANSI/AAMI

ES 60601-1 / IEC 60601-1 series for systems – shall comply with

the standard IEC 60601-1-1, Safety requirements for medical

electrical systems. Equipment not complying with ANSI/AAMI

ES 60601-1 shall be kept outside the patient environment, as

defined in the standard.

17. WARNING: To avoid the risk of electric shock, this equipment

must only be connected to supply mains with protective earth.

Mobile Tablet PC

MD- 1 0 0 P r o

18. “ WARNING: No modification of this equipment is allowed”

19. Replaceable Batteries: The equipment contains replaceable

lithium battery, user replaceable type: The following warning in

user manual and service instructions.

* Caution: Danger of explosion if battery is incorrectly

replaced. Replace only with the same or equivalent type of battery

recommended by the manufacturer. Dispose of used batteries

according to the manufacturer instruction.

Mobile Tablet PC

MD- 1 0 0 P r o

Classification

1. Degree of production against electric shock: not classified

2. Equipment not suitable for use in the presence of a flammable

anesthetic mixture with air or with oxygen or nitrous oxide.

3. Mode of operation: Continuous

4. Type of protection against electric shock: Class I equipment

5. ME EQUIPMENT must be connected to an appropriate power

source, if loss of the power source would result in an

unacceptable RISK.

Mobile Tablet PC

MD- 1 0 0 P r o

Regulations Information

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and radiates radio frequency energy, and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

 Consult the dealer or an experienced radio TV technician for

help.

Mobile Tablet PC

MD- 1 0 0 P r o

NOTE

 The changes or modifications not expressly approved by the

party responsible for compliance could void the user’s

authority to operate the equipment.

 Shield interface cables and AC power cord, if any, must be

used in order to comply with the emission limits.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received, including

interference that may cause undesired operation.

CE Conformity

This device is in compliance with the essential

safety requirements and other relevant provisions

set out in the European Directive.

Mobile Tablet PC

MD- 1 0 0 P r o

Safety Instructions

 Read the safety instructions carefully and

thoroughly.

 All cautions and warnings on the equipment or

user’s manual should be noted.

Keep the User’s Guide that comes with the package

for future reference.

Keep this equipment away from humidity and high

temperature.

Lay this equipment on a stable surface before

setting it up.

The openings on the enclosure are used for air

convection and to prevent the equipment from

overheating. Do not cover the openings.

Mobile Tablet PC

MD- 1 0 0 P r o

 Do not leave the equipment in an unconditioned

environment with a storage temperature above

60°C (140°F) or below 0°C (32°F), which may

damage the equipment.

 The unit should be operated under maximum

ambient temperature of 40°C (120°F).

 Make sure the power voltage is within safety

range and has been adjusted properly to the

value of 100~240V before connecting the

equipment to the power outlet.

 Always unplug the AC power cord before

installing any add-on card or module to the

equipment.

 Always disconnect the AC power cord or uninstall

the battery pack or switch off the wall socket if the

equipment would be left unused for a certain time

to achieve zero energy consumption.

Never pour liquid into the opening that could damage

the equipment or cause an electrical shock.

Place the power cord in a way that people are

unlikely to step on it. Do not place anything on top

of the power cord.

Mobile Tablet PC

MD- 1 0 0 P r o

Always keep the strong magnetic or electrical

objects away from the equipment.

 When installing the coaxial cable to the TV Tuner,

it is necessary to ensure that the metal shield is

reliable connected to protective earthing system

of the building.

 Cable distribution system should be grounded

(earthed) in accordance with ANSI/NFPA 70, the

National Electrical Code (NEC), in particular

Section 820.93, Grounding of Outer Conductive

Shield of a Coaxial Cable.

 To prevent explosion caused by improper battery

replacement, use the same or equivalent type of

battery recommended by the manufacturer only.

 Always keep the battery in a safe place.

If any of the following situations arises, get the

equipment checked by a service personnel:

 The power cord or plug is damaged.

 Liquid has penetrated into the equipment.

 The equipment has been exposed to moisture.

 The equipment has not worked well or you can

not get it work according to User’s Manual.

Mobile Tablet PC

MD- 1 0 0 P r o

 The equipment was dropped and damaged.

 The equipment has obvious signs of breakage.

Green Product Features

 Reduced energy consumption during use and

stand-by

 Limited use of substances harmful to the

environment and health

 Easily dismantled and recycled

 Reduced use of natural resources by encouraging

recycling

 Extended product lifetime through easy upgrades

 Reduced solid waste production through

take-back policy

Environmental Policy

 The product has been designed to enable proper

reuse of parts and recycling and should not be

thrown away

 Users should contact the local authorized point of

collection for recycling and disposing of their

end-of-life products.

Mobile Tablet PC

MD- 1 0 0 P r o

Safety Guideline for Using Lithium Battery

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by

the equipment manufacturer. Discard used batteries according to

manufacturer’s instructions.

WEEE Statement

Under the European Union ("EU") Directive on Waste Electrical and

Electronic Equipment, Directive 2002/96/EC, which takes effect on

August 13, 2005, products of "electrical and electronic equipment"

cannot be discarded as municipal waste anymore and

manufacturers of covered electronic equipment will be obligated to

take back such products at the end of their useful life.

Trademarks

All trademarks are the properties of their respective owners.

SRS Premium Sound, SRS and the symbol are trademarks of SRS

Labs, Inc.

Mobile Tablet PC

MD- 1 0 0 P r o

Contents

Chapter 1 General Information

1.1 Introduction ....................................................................1-1

1.2 Features ........................................................................1-2

1.3 Specification ..................................................................1-3

Chapter 2 Hardware Instalation

2.1 Safety Precautions .........................................................2-2

2.2 Product Overview.............................................................2-3

Appendix C Miscellanea

A.1 General Cleaning Tips .................................................. A-2

A.2 Cleaning Tools ............................................................. A-3

A.3 Scrap Computer Recycling ......................................... A-5

Mobile Tablet PC

MD- 1 0 0 P r o

General

Information

Chapter

1

Mobile Tablet PC

MD- 1 0 0 P r o

Chapter 1 General Information 1-1

1.1 Introduction

MD100-Pro is the first Onyx x86 tablet terminal tailored for the

Medical professionals. With AMD Brazos 1GHz processor and

AM50 FCH chipset, MD100-Pro provides optimal graphical

performance with low power consumption. With 2GB DDR3

memories, this tablet is capable of handling many tasks that is

designed for desktop computers. MD100-Pro support Window 7 OS

environment to seamlessly connect HIS software applications.

Moreover, it offers great flexibility to user by allowing user to

connect devices thru external USB, HDMI, Audio Jack connectors.

ONYX MD100-Pro also provides 802.11 b/g/n WLAN and BT 3.0 for

fast wireless connectivity which allows medical professionals to be

able to access patient information or medical record anywhere and

anytime.

Page is loading ...

Onyx MD-100Pro User manual

Onyx MD-100Pro User manual

Related papers

Other documents