Panasonic DPC322 Operating instructions

Brand: Panasonic

Model: DPC322

Type: Operating instructions

Software

Operating Instructions

(For IPX/SPX setup utility)

Model No. DP-C262/C322

Before using this software, please read these instructions completely and keep these operating instructions for future reference.

English

General

Description

System

Requirements

IPX/SPX setup

utility Main Window

Device MenuSetup MenuOption Menu

The following trademarks and registered trademarks are used throughout this manual:

Microsoft, MS-DOS, Windows, Windows NT and Windows Server are either registered

trademarks or trademarks of Microsoft Corporation in the USA and other countries.

i386, i486, Celeron, Intel Centrino and Pentium are trademarks of Intel Corporation.

The USB-IF Logos are trademarks of Universal Serial Bus Implementers Forum, Inc.

TrueType is a registered trademark of Apple Computer, Inc.

Novell, NetWare, IntranetWare, NDS are registered trademarks of Novell, Inc. in the USA and

other countries.

PEERLESSPage

is a trademark of the PEERLESS Systems Corporation; and,

PEERLESSPrint and Memory Reduction Technology

are registered trademarks PEERLESS

Systems Corporation; and, COPYRIGHT

2002 PEERLESS Systems Corporation.

Universal Font Scaling Technology (UFST) and all typefaces have been licensed from Agfa

Monotype.

PCL is a trademark of Hewlett-Packard Company.

Adobe, Acrobat, Adobe Reader, Adobe Type Manager, PostScript, PostScript 3 and Reader are

either registered trademarks or trademarks of Adobe Systems Incorporated in the United States

and/or other countries.

All other product/brand names, trademarks or registered trademarks identied herein are the

property of their respective owners.

Unauthorized copying and distribution is a violation of law.

Published in Japan.

The contents of these Operating Instructions are subject to change without notice.

General Description .......................................... 4

System Requirements ....................................... 6

IPX/SPX setup utility Main Window................... 8

Menu .......................................................................................................... 9

Toolbar ....................................................................................................... 10

Right-Click Menu ........................................................................................ 11

Basic Operation.......................................................................................... 12

Device Menu ...................................................... 14

Search / Exit ............................................................................................... 14

Setup Menu........................................................ 16

Network Setup............................................................................................ 16

Create NetWare Queue.............................................................................. 23

Delete NetWare Object .............................................................................. 25

Option Menu ...................................................... 26

Select the protocol for search..................................................................... 26

Table of Contents

General

Description

General

Description

General Description

The IPX/SPX setup utility software searches a NetWare network for Printing devices, and displays these in a list

from which you can perform operations, such as specifying the network setup, and creating print queues.

NetWare Server

The software can invoke NetWare

utility functions, such as Create

NetWare Queue, and Delete

Network Object.

The software searches a NetWare network for

printing devices, and displays them in a list. The

network settings for each device can be set for the

displayed devices.

General

Description

General

Description

Memo

System

Requirements

System

Requirements

System Requirements

Operating System : Windows 98*

, Windows NT 4.0*

(With Service Pack 3 or later is required),

Windows 2000*

, Windows XP*

Communication protocol : TCP/IP or IPX/SPX

Screen : 640 x 480 or higher (256 colors or higher)

Other : NetWare queues can only be created if the NetWare Client software from Novell

Corporation is installed.

*1 Microsoft

Windows

98 operating system (hereafter Windows 98)

*2 Microsoft

Windows NT

operating system Version 4.0 (hereafter Windows NT 4.0)

*3 Microsoft

Windows

2000 operating system (hereafter Windows 2000)

*4 Microsoft

Windows

XP operating system (hereafter Windows XP)

System

Requirements

System

Requirements

Memo

IPX/SPX setup

utility Main Window

IPX/SPX setup utility Main Window

When you start the IPX/SPX setup utility, the software searches the network for printers, and displays the results

in a list within the main window.

Various operations can be performed from the main window by using the menu, the toolbar, and right-clicking on

the desired function. To specify network settings, or create NetWare queues, select the printer from the list rst.

Note:

The search feature uses both the JCP over UDP, and JCP over IPX protocols.

IPX/SPX setup

utility Main Window

The following operations can be performed by selecting the desired command from the relevant main window

menu.

Menu Menu Item Description

Device Search Searches the network for printers, and refreshes the screen

display with the latest results.

Exit Exits the IPX/SPX setup utility.

Setup Network Setup... Opens the Network Printer Setup window, and allows

conguration of the network settings.

Create NetWare Queue Opens the Create NetWare Print Queue window, and creates

a NetWare queue. This command is only available if a NetWare

Client Software has been installed on your PC.

Delete NetWare Object Deletes NetWare objects. This command is only available if a

NetWare Client Software has been installed on your PC.

Option Select the protocol for search... Species the network environment to be used for searching in

the IPX/SPX setup utility.

Help About... Shows the IPX/SPX setup utility version information.

IPX/SPX setup

utility Main Window

Toolbar

A toolbar containing ve commonly used operations appears below the menu bar in the main window. You can

execute a command simply by clicking on the corresponding icon.

1. Search

2. Network Setup...

3. Create NetWare Queue

4. Use TCP/IP Protocol

5. Use IPX/SPX Protocol

Note:

The

Create NetWare Queue

, and

Network Setup...

icons in the toolbar are only available when a printer is selected from

the list provided NetWare Client software is installed on your PC.

IPX/SPX setup

utility Main Window

Right-Click Menu

If you right-click the mouse on a printer in the list, a popup menu appears with three commands from the Setup

menu. Select a relevant command from the menu to perform the desired operation.

Network Setup...

Create NetWare Queue

Delete NetWare Object

IPX/SPX setup

utility Main Window

IPX/SPX setup

utility Main Window

Basic Operation

Use the following procedure to start the IPX/SPX setup utility, and perform various available operations.

Click the Start menu, and select Panasonic Panasonic Document Management System

IPX-SPX setup utility.

The IPX/SPX setup utility main window appears. The main window displays a list of printers found by the

search.

Select a desired printer from the list, and then choose the operation you want to perform from the menu,

toolbar, or by right-clicking on the menu.

NOTE

For the details of each menu command, see pages 14 to 29.

IPX/SPX setup

utility Main Window

IPX/SPX setup

utility Main Window

Memo

Device Menu

Search / Exit

The Device menu is used to search the network for printers, and to exit from the IPX/SPX setup utility.

From the Device menu, select Search to explore the network for all network connected printers, and display

the results on the screen.

Exit

From the Device menu, select Exit to exit from the IPX/SPX setup utility.

Device Menu

Memo

Setup Menu

Network Setup

The Setup menu is used to specify network settings, create a NetWare queue, or delete NetWare objects for the

selected printer.

The Network Setup is used to congure the settings for the selected printer.

When you are nished, click the

Setup

button.

A dialog box opens asking you to conrm the

settings.

Check that the settings are correct, and then

click the

button.

The following completion message appears

after the new settings are sent to the printer.

Click the

Yes

button.

The printer restarts, and the new settings are

applied.

Select a printer, then open the Setup menu,

and then select Network Setup....The Network

Printer Setup window opens.

Note:

If a password was setup for the printer, the password

entry window opens. Enter the correct password

(default: 0000). If you select the

Guest user (read

only)

check box, you can leave the password eld

blank, and still open the printer setup window. In this

case, however, you can only view the settings, but

cannot modify them.

Use the General tab, TCP/IP tab, and NetWare

tab to switch between various settings.

Setup Menu

Network Setup

General Tab - Change root password

You can use the General tab to change the password for the root user.

To change the password, click the

Change root password...

button.

The following Password Setup dialog box opens.

Enter the Old password, New Password, and Conrm new password elds in the Password Setup dialog

box, and then click the

button.

Setup Menu

Network Setup

TCP/IP Tab

Click the TCP/IP tab to display the TCP/IP conguration page. This page is used to setup the IP address, subnet

mask, and default gateway TCP/IP settings.

1. Use DHCP

Select this check box to use DHCP.

2. IP Address, Subnet Mask, Default Gateway

If you are not using DHCP (Use DHCP check box is not checked), then specify the IP address, subnet

mask, and default gateway.

Setup Menu

Continued on the next page...

Network Setup

NetWare Tab

Click the NetWare tab to display the NetWare conguration page. This page is used to setup the NetWare

protocol, Operation mode, and other NetWare settings.

1. Use NetWare Protocol

Select this check box to use the NetWare protocol.

2. Frame Type

Select one of the following frame types.

ETHER-II

802.3

802.2

SNAP

3. Printer Name

Enter the printer name.

Setup Menu

The Operation Mode eld species the NetWare operation mode. Select either the PSERVER Mode (=Print

server), or RPRINTER Mode (=Remote printer) option button. If you select PSERVER Mode, also enter the

Print Server Name.

If you are using as a bindery print server, select the Bindery Mode check box.

Select the Operation Mode, and then click various

Setup...

buttons to open the associated properties

dialog boxes. You can specify properties for the Print server, Bindery print server, NDS print server, and

Remote printer.

Print Server Name

NDS -

Setup...

button

Setup...

button

Bindery Mode

PSERVER -

Setup...

button

Clicking the

Setup...

button opens PSERVER Setup

dialog box for the Print server.

Select this check box to setup as a Bindery print server.

Clicking the

Setup...

button opens Bindery Setup dialog

box for the Bindery print server.

Clicking the

Setup...

button opens NDS Setup dialog

box for the NDS print server.

If PSERVER Mode is selected, enter the Print Server Name.

RPRINTER -

Setup...

button

Clicking the

Setup...

button opens RPRINTER Setup

dialog box for the Remote printer.

4. Operation Mode

PSERVER Mode

Select this option button to setup the NetWare operation mode to Print server.

RPRINTER Mode

Select this option button to setup the NetWare operation mode to Remote printer.

Page is loading ...

Panasonic DPC322 Operating instructions

Panasonic DPC322 Operating instructions

Panasonic DPC322 Operating instructions

Related papers

Other documents