Axis JS7001K User manual

Category
Car TFT monitors
Type
User manual

Axis JS7001K is a versatile system that allows you to connect two cameras to a 7-inch LED monitor, providing you with a clear view of your surroundings. The cameras feature a 130° diagonal viewing angle and 18 LED night vision, ensuring visibility even in low-light conditions. You can easily switch between cameras using the monitor or remote control, and adjust settings such as brightness, contrast, and volume to your preference.

Axis JS7001K is a versatile system that allows you to connect two cameras to a 7-inch LED monitor, providing you with a clear view of your surroundings. The cameras feature a 130° diagonal viewing angle and 18 LED night vision, ensuring visibility even in low-light conditions. You can easily switch between cameras using the monitor or remote control, and adjust settings such as brightness, contrast, and volume to your preference.

1
JS7001K
7 INCH LED MONITOR & HEAVY DUTY CAMERA KIT
INSTRUCTION MANUAL
SPECIFICATIONS
JS7001 MONITOR
- TFT Panel: New Grade A LCD, LED Backlight
- LCD Size: 178mm (7-Inch) Diagonal
- Display Format: 16:9
- Resolution: 800 x 480
- Brightness: < 400 CD/M2
- Viewing Angles: 90 Deg. Left/Right/Up/Down
- Video System: Auto PAL/NTSC Select
- Video Connect: 2 x 4-Pin (Female)
- Reverse Trigger: Assignable to Cam 1 or 2 (via Menu)
- Camera View: Input Selectable (CAM Button)
Input Overide in Reverse Mode
- Monitor View: Normal/Mirror Image Select
- Guidelines: Selectable
- Audio: On Board Speaker
- Main Menu: Brightness/Contrast/Colour/Volume/Reset/
Slideshow/Language/Reverse Priority & Delay
- Casing Material: 100°C Heat/Flame Proof (UL94V-0) ABS
- Power Input: 10-32V DC (Negative Ground)
- Dimensions: 182W x 122H x 29D mm (excluding brackets)
- Included: Stand Mount, U-Shape Mount, Remote Control,
Power Cable Assembly, Sunshade
Optional: Glass Mount Bracket (BKT101)
CAMERA
- Image Device: 1/3” Nextchip NVP2040 CCD
- Image Sensor: Sony ICX639XK
- Diagonal Viewing Angle: 130°
- Horizontal Viewing Angle: 90°
- Signal System: PAL
- Eective Pixels: 752H x 582V
- Resolution: 600 TV Lines
- Sync System: Internal
- Orientation: Mirror Image
- Night Vision: Yes, 18 LED
- Illumination: 0.1 Lux with IR on
- Ingress Protection: IP67
- Integrated Microphone: Yes
- Operating Temperature: -20 to 70°
- Power Consumption: 90-300mA
- Dimensions: 77W x 52H x 69D mm
(Excl Bracket)
- Connection: Terminated 4-Pin Male
- Power Supply: 8-50V DC
- Included: 15m 4 Pin (Male) to 4 Pin
(Female)
Extension Cable,
Mounting Bracket
2
2 3 4 5 6
Built-In
Speaker
1
Thank you for choosing this versatile AXIS system!
Please take time to read through the simple instructions below.
CAUTIONS:
• Securely install the monitor in a location that will not hinder driver vision
or control.
• Keep the monitor away from moisture and heat sources
• Clean the display with a soft dry cloth. Do not use chemical cleaners.
MONITOR FUNCTIONS:
1. Remote Control Receiver
2. Decrease Button
3. Increase Button
4. Power On/O
5. Menu Button
6. Camera Selection (to change between cameras)
REMOTE CONTROL:
Aim directly at the reception window
• Replace battery (CR2025) if the range reduces or will not operate.
(1) Mute
(2) Power
(3) AV
(4) Menu
(5) Decrease
(6) Increase
(7) Orientation
[Up/Down/Left/Right]
P.P
MENU
A V
(to adjust settings in Menu)
}
1
5
7
2
6
3
4
3
4-Pin Locking Socket (Female) Connection 4-Pin Locking Plug (Male) Connection
Denition: Connector Front View Denition: Connector Front View
VIDEO
AUDIO
GROUNDPOWER
9 Pin Male
4 Pin Female Video V1
4 Pin Female Video V2
16:9/4:3
1
2
3
4
5
6
7
8
9
10
1. Mute button
2. Power On/Off
3. AV
4. Menu
5. Decrease Button
6. Increase Button
7.
Switch
8. Time switch
9. Display selection
Green - Reverse Trigger
Black - Ground
Brown - Dimmer Control
Red - 12 - 24V
Note: Cam 2 has reverse trigger control.
CONNECTIONS:
ACCESSORIES:
15m Lead
Leads &
Adaptors
Bracket Remote ControlU-shape MountSunshade
CONNECTIONS
ACCESSORIES
4
Press the M button on the monitor or the MENU button on the remote
to open the menu. Press the M/MENU button repeatedly to scroll
through the dierent options. Press the left or right arrow to adjust the
settings.
(Note: Most of the settings only aect the camera currently being viewed. Press the
CAM button on the monitor or the AV button on the remote to change between camera
1 and camera 2.)
Brightness Adjust the brightness of the camera currently
being viewed.
Contrast Adjust the contrast of the camera currently
being viewed.
Colour Adjust the colour of the camera currently
being viewed.
Volume Adjust the volume of the camera currently
being viewed.
Display Adjust the aspect ratio (16:9 recommended).
Reversing Priority Select which camera is displayed when the
reverse trigger is engaged.
Reversing Delay Adjust the time delay between the vehicle
going into reverse and the reverse camera
being displayed.
Auto Slideshow The monitor will automatically change which
camera is displayed every 5 seconds.
TCON Flip the image of the camera currently being
viewed horizontally and/or vertically.
Guideline Displays guidelines when the reverse trigger
is engaged.
Language Set menu language.
Reset Reset to default settings.
Monitor Menu Instructions
5
CCD Camera [Termination to 4-Pin (M)]
Use when connecting to a monitor with RCA input
[AX4P-F/RCA-M]
4 Pin Conguration
(OPTIONAL ADAPTER) - 4-Pin (F) to RCA
4-Pin Locking Socket (Female) Connection 4-Pin Locking Plug (Male) Connection
Denition: Connector Front View Denition: Connector Front View
4-Pin Locking Socket (Female) Connection 4-Pin Locking Plug (Male) Connection
Denition: Connector Front View Denition: Connector Front View
4-Pin Locking Socket (Female) Connection 4-Pin Locking Plug (Male) Connection
Denition: Connector Front View Denition: Connector Front View
[OPTIONAL]
4 PIN to RCA Connection
White (audio)
Red
Black
Yellow (video)
B
B (15 Metre Cable)
CAMERA WIRING DIAGRAM:
6
CAMERA INSTALLATION:
7
NOTES:
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
8
AX1570
JS7001K
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Axis JS7001K User manual

Category
Car TFT monitors
Type
User manual

Axis JS7001K is a versatile system that allows you to connect two cameras to a 7-inch LED monitor, providing you with a clear view of your surroundings. The cameras feature a 130° diagonal viewing angle and 18 LED night vision, ensuring visibility even in low-light conditions. You can easily switch between cameras using the monitor or remote control, and adjust settings such as brightness, contrast, and volume to your preference.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI