Axis JS7001K User manual

1

JS7001K

7 INCH LED MONITOR & HEAVY DUTY CAMERA KIT

INSTRUCTION MANUAL

SPECIFICATIONS

JS7001 MONITOR

- TFT Panel: New Grade A LCD, LED Backlight

- LCD Size: 178mm (7-Inch) Diagonal

- Display Format: 16:9

- Resolution: 800 x 480

- Brightness: < 400 CD/M2

- Viewing Angles: 90 Deg. Left/Right/Up/Down

- Video System: Auto PAL/NTSC Select

- Video Connect: 2 x 4-Pin (Female)

- Reverse Trigger: Assignable to Cam 1 or 2 (via Menu)

- Camera View: Input Selectable (CAM Button)

Input Overide in Reverse Mode

- Monitor View: Normal/Mirror Image Select

- Guidelines: Selectable

- Audio: On Board Speaker

- Main Menu: Brightness/Contrast/Colour/Volume/Reset/

Slideshow/Language/Reverse Priority & Delay

- Casing Material: 100°C Heat/Flame Proof (UL94V-0) ABS

- Power Input: 10-32V DC (Negative Ground)

- Dimensions: 182W x 122H x 29D mm (excluding brackets)

- Included: Stand Mount, U-Shape Mount, Remote Control,

Power Cable Assembly, Sunshade

Optional: Glass Mount Bracket (BKT101)

CAMERA

- Image Device: 1/3” Nextchip NVP2040 CCD

- Image Sensor: Sony ICX639XK

- Diagonal Viewing Angle: 130°

- Horizontal Viewing Angle: 90°

- Signal System: PAL

- Eective Pixels: 752H x 582V

- Resolution: 600 TV Lines

- Sync System: Internal

- Orientation: Mirror Image

- Night Vision: Yes, 18 LED

- Illumination: 0.1 Lux with IR on

- Ingress Protection: IP67

- Integrated Microphone: Yes

- Operating Temperature: -20 to 70°

- Power Consumption: 90-300mA

- Dimensions: 77W x 52H x 69D mm

(Excl Bracket)

- Connection: Terminated 4-Pin Male

- Power Supply: 8-50V DC

- Included: 15m 4 Pin (Male) to 4 Pin

(Female)

Extension Cable,

Mounting Bracket

2

2 3 4 5 6

Built-In

Speaker

1

Thank you for choosing this versatile AXIS system!

Please take time to read through the simple instructions below.

CAUTIONS:

• Securely install the monitor in a location that will not hinder driver vision

or control.

• Keep the monitor away from moisture and heat sources

• Clean the display with a soft dry cloth. Do not use chemical cleaners.

MONITOR FUNCTIONS:

1. Remote Control Receiver

2. Decrease Button

3. Increase Button

4. Power On/O

5. Menu Button

6. Camera Selection (to change between cameras)

REMOTE CONTROL:

• Aim directly at the reception window

• Replace battery (CR2025) if the range reduces or will not operate.

(1) Mute

(2) Power

(3) AV

(4) Menu

(5) Decrease

(6) Increase

(7) Orientation

[Up/Down/Left/Right]

P.P

MENU

A V

(to adjust settings in Menu)

}

1

5

7

2

6

3

4

3

4-Pin Locking Socket (Female) Connection 4-Pin Locking Plug (Male) Connection

Denition: Connector Front View Denition: Connector Front View

VIDEO

AUDIO

GROUNDPOWER

9 Pin Male

4 Pin Female Video V1

4 Pin Female Video V2

16:9/4:3

1

2

3

4

5

6

7

8

9

10

1. Mute button

2. Power On/Off

3. AV

4. Menu

5. Decrease Button

6. Increase Button

7.

Switch

8. Time switch

9. Display selection

Green - Reverse Trigger

Black - Ground

Brown - Dimmer Control

Red - 12 - 24V

Note: Cam 2 has reverse trigger control.

CONNECTIONS:

ACCESSORIES:

15m Lead

Leads &

Adaptors

Bracket Remote ControlU-shape MountSunshade

CONNECTIONS

ACCESSORIES

4

Press the M button on the monitor or the MENU button on the remote

to open the menu. Press the M/MENU button repeatedly to scroll

through the dierent options. Press the left or right arrow to adjust the

settings.

(Note: Most of the settings only aect the camera currently being viewed. Press the

CAM button on the monitor or the AV button on the remote to change between camera

1 and camera 2.)

Brightness Adjust the brightness of the camera currently

being viewed.

Contrast Adjust the contrast of the camera currently

being viewed.

Colour Adjust the colour of the camera currently

being viewed.

Volume Adjust the volume of the camera currently

being viewed.

Display Adjust the aspect ratio (16:9 recommended).

Reversing Priority Select which camera is displayed when the

reverse trigger is engaged.

Reversing Delay Adjust the time delay between the vehicle

going into reverse and the reverse camera

being displayed.

Auto Slideshow The monitor will automatically change which

camera is displayed every 5 seconds.

TCON Flip the image of the camera currently being

viewed horizontally and/or vertically.

Guideline Displays guidelines when the reverse trigger

is engaged.

Language Set menu language.

Reset Reset to default settings.

Monitor Menu Instructions

5

CCD Camera [Termination to 4-Pin (M)]

Use when connecting to a monitor with RCA input

[AX4P-F/RCA-M]

4 Pin Conguration

(OPTIONAL ADAPTER) - 4-Pin (F) to RCA

4-Pin Locking Socket (Female) Connection 4-Pin Locking Plug (Male) Connection

Denition: Connector Front View Denition: Connector Front View

4-Pin Locking Socket (Female) Connection 4-Pin Locking Plug (Male) Connection

Denition: Connector Front View Denition: Connector Front View

4-Pin Locking Socket (Female) Connection 4-Pin Locking Plug (Male) Connection

Denition: Connector Front View Denition: Connector Front View

[OPTIONAL]

4 PIN to RCA Connection

White (audio)

Red

Black

Yellow (video)

B

B (15 Metre Cable)

CAMERA WIRING DIAGRAM:

6

CAMERA INSTALLATION:

7

NOTES:

______________________________________________________________

8

AX1570

JS7001K

Axis JS7001K User manual

Related papers

Other documents