VistaQuest VQ-DV7 Quick start guide

VistaQuest
Brand
VistaQuest
Model
VQ-DV7
Type
Quick start guide

This manual is also suitable for

- 0 -
Quick Start Guide
DIGITAL CAMCORDER
DV7
- 1 -
110707
Name of parts
1.FOCUS SWITH
Macro Normal Landscape
2.POWER (ON/OFF) BUTTON
3.STRAP EYELET
4.POWER CHARGE LAMP
5.POWER LAMP /INDICATOR LAMP
6. SPEAKER
7.SHUTTER/SNAP BUTTON
8.ZOOM OUT (
- ); ZOOM IN (
+ )
9.ARROW
OK BUTTON; LEFT BUTTON; RIGHT BUTTON; UP BUTTON; DOWN BUTTON
10.MODE BUTTON
11.MENU BUTTON
12.EARPOHNE JACK
13.USB PORT
14.TV OUT
15.TFT screen
16.MICROPHONE
17.LENS
18.FLASH
19.BATTERY COVER (SD SLOT IN IT)
- 2 -
Display Information
- 3 -
- 4 -
- 5 -
• Installing DV Batteries:
1.Slide open the battery compartment cover by pressing
the place as shown on the right side.
2.Insert four AAA-size alkaline batteries with positive (+)
and negative (-) poles matching the directions indicated
inside the battery cover.
3.Close the battery cover.
• Inserting SD/MMC Card:
This DV offers SD/MMC card for storing files:
SD Card - Optional SD cards provide removable, reusable storage for
pictures and videos. Store as many pictures as you like, depending on
the size of the card.
1.Turn the DV off.
2.Position the card as shown. Push the card into the slot until it hooks up.
3.To remove the card gently push the card until it get released from the
hooking mechanism. After it has pooped out pull it out completely.
Taking Pictures
• Taking a Video
1.Turn on the DV by pressing the power button and then start screen appears.
2.The TFT screen will display (default ).
3.View the subject through the TFT screen.
4.Press the shutter button to take a video; Press the shutter button again to stop recording.
Note: 1.Use to change the video size; Use to adjust the white balance.
2.During recording, user can press the zoom in or zoom out button for zoom in/out.
3.The video resolution is VGA (640 X 480) and CIF (320 x240).
4.Be careful not to contact the microphone while recording.
5.The maximum length of an individual video clip depends on memory size. Use a
higher capacity SD card will record longer movie clip.
- 6 -
6.Video recording stops automatically when memory is full.
7.Flash Strobe will be deactivated at this mode.
• Take a Photo
1.Press the mode button once and you will see the icon
shows on the TFT screen.
2.View the objects through the TFT screen.
3.Press the shutter button to take the photo.
Note: 1.How to avoid the blurry shots? After pressing down shutter button, keep your hands
steady for about 2 seconds to get the best result.
2.Use to change the photo size; Use to adjust the white balance; Use to adjust the
flash; Use to capture three continuous photos or take the photo in self-timer mode .
3.User can press the zoom in or zoom out button for zoom in/out.
• listen Music
1.Press the mode button twice and you will see the icon
shows on the TFT screen.
2.Press the ok button to play/pause the music; press zoom in or zoom out button to adjust
the distance.
3.Press the menu button to stop playing and then press mode button to switch to voice pen
mode.
• Use Voice Pen
1.Press the mode button the three times and you will see the icon
shows on the TFT
screen.
2.Press the shutter button to record voices; press the shutter button again to stop recording.
- 7 -
Review videps/photos/voice
Press the ok button to enter playback mode and you will see the videos/photos/voice in
thumbnail mode. When you use (to jump previous/next file) or (to jump previous/
next page)to select the file, the file type will shows on the left-up corner. Just press the ok button
to view the file in the whole TFT screen, at this time you can use to select next file. Press
the ok button again to return to thumbnail mode. Press the mode button to exit playback mode.
1.Reviewing Videos (MPEG4)
Press the shutter button to play/pause the playing; press the menu button to stop video playing
and then press the mode button to exit reviewing mode.
2.Reviewing Photos (JPG)
In this mode you can use zoom in and zoom out buttons to zoom the photo. And then press the
ok button, you will fours yellow arrows appears on the TFT screen, press view
different parts of the photo, press the ok button again to view the photo in original size.
3. Reviewing Voice (WAV)
Press the shutter button to play/pause the playing; and then press the mode button to exit
reviewing mode.
• Deleting files
When in playback status, you can press the menu button to active the playback menu. Press
the or button to select the icon and you will see the icon in blue, this time press the ok
or button to enter the submenu, press the or button to select erase one or erase all
(The selected one in blue ground). Then press the ok button to confirm. You will see a dialogue
box. Use button to select ok or cancel option (The selected one in red ground). After
select the option, press the ok button to confirm. Then press the mode button to exit the
playback mode.
- 8 -
The VistaQuest Corporation is proud that you have chosen its
product and hopes you will enjoy sharing “a clearer vision” of your memories and special
moments captured with your new camera with friends and family for many years.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

VistaQuest VQ-DV7 Quick start guide

VistaQuest
Brand
VistaQuest
Model
VQ-DV7
Type
Quick start guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents