KERN OXM 901 Installation guide

Brand: KERN

Model: OXM 901

Type: Installation guide

KERN OXM 901 is a high-performance digital microscope with a 5-megapixel CMOS sensor that captures sharp and detailed images and videos. It features a 3.5-inch color TFT display for live preview and playback, and a built-in LED illumination system for optimal lighting. With its user-friendly interface and included software, the microscope is suitable for various applications in education, research, and industry, including quality control, material analysis, and biological observations.

KERN OXM 901 is a high-performance digital microscope with a 5-megapixel CMOS sensor that captures sharp and detailed images and videos. It features a 3.5-inch color TFT display for live preview and playback, and a built-in LED illumination system for optimal lighting. With its user-friendly interface and included software, the microscope is suitable for various applications in education, research, and industry, including quality control, material analysis, and biological observations.

MICROSCOPE VIS SOFTWARE

Installation Instructions

2016

2

Copyright © 2016 KERN & SOHN GmbH

Introduction

Introduction

The Microscope VIS application lets you capture images and video from digital cameras

connected to microscopes, process and analyze them.

Software Compatibility

The Microscope VIS runs on the personal computers with the following installed operating

systems:

 Windows XP SP3;

 Windows Vista SP2;

 Windows 7 SP1;

 Windows 8;

 Windows 8.1;

 Windows 10.

The application run on .Net Framework 4.0 with update KB2468871 or later. Using .Net

Framework 4.5.2 or later is recommended for Windows Vista or later.

Hardware Compatibility

The application runs on the personal computers with the following installed hardware

(minimal requirements):

 Pentium 4/AMD Athlon 64 processor;

 2 GB (32 bit) 4 GB (64 bit) of RAM;

 2 GB of available hard-disk space;

 DVD/CD-ROM drive;

 USB port.

List of the supported cameras as of the current release:

 Basler ACE series;

 OPTEC USB2 Digital Video 320M.

3

Copyright © 2016 KERN & SOHN GmbH

Installation Instructions

Installation Instructions

Install

To install Microscope VIS, follow the steps below.

1. Insert the CD with the Microscope VIS application into the CD ROM drive. If the program

does not start automatically, run the MicroscopeVIS.Setup file on the

CD ROM drive to begin the installation.

You will see the following screen:

2. Read Software license agreement and select checkbox “I agree to the license terms and

conditions”. The Install button is activated.

3. Click the:

 Install button if you want to install Microscope VIS into the default directory

(C:\Program Files\MicroscopeVIS), or

 Options button to select the destination. Verify that the installation path is correct.

Click the Install button to begin installation.

The setup program will begin copying and installing files. You will see the following screen:

4

Copyright © 2016 KERN & SOHN GmbH

Installation Instructions

4. During the installation Windows can display OS specific warning that installed software

is not passed Windows Logo testing or publisher of the software cannot be verified:

5

Copyright © 2016 KERN & SOHN GmbH

Installation Instructions

Select “Continue Anyway” or “Install this driver anyway” to proceed with the installation

process.

5. The final installation screen indicates that Microscope VIS is now installed.

Click the Close button to conclude the installation process.

Launch

To launch the Microscope VIS application:

 Double-click the shortcut on the desktop, or

 Click the Microscope VIS item in the Windows start

menu.

Repair

To repair Microscope VIS, follow the steps below.

1. Go into the Windows Control Panel (Start –> Control Panel).

2. Click the Uninstall a program link (or Control Panel -> Programs and Features, or

Control Panel – Add or Remove Programs (relevant for Windows XP)).

3. Select the Microscope VIS from the list.

6

Copyright © 2016 KERN & SOHN GmbH

Installation Instructions

4. Click the Repair button to begin the repairing process.

5. Click the Close button.

Uninstall

To uninstall Microscope VIS, follow the steps below.

1. Go into the Windows Control Panel.

2. Click the Uninstall a program link (or Control Panel -> Programs and Features, or

Control Panel – Add or Remove Programs (relevant for Windows XP)).

3. Select the Microscope VIS from the list.

4. Click the Uninstall button to begin the uninstall process.

You will see the following screen:

Uninstall

5. Click the Uninstall button to uninstall the Microscope VIS.

You will see the Uninstall progress screen:

7

Copyright © 2016 KERN & SOHN GmbH

Installation Instructions

6. The final uninstall screen indicates that Microscope VIS is now uninstalled.

1
2
3
4
5
6
7

KERN OXM 901 Installation guide

Brand: KERN

Model: OXM 901

Type: Installation guide

KERN OXM 901 is a high-performance digital microscope with a 5-megapixel CMOS sensor that captures sharp and detailed images and videos. It features a 3.5-inch color TFT display for live preview and playback, and a built-in LED illumination system for optimal lighting. With its user-friendly interface and included software, the microscope is suitable for various applications in education, research, and industry, including quality control, material analysis, and biological observations.

Related papers

Other documents