2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Symmons
  6. SLC-8802-1.5

Symmons SLC-8802-1.5 Installation guide

  • Hello! I've reviewed the installation guide for the Symmons DS Creations Lavatory Faucet SLC-8802-1.5. This document provides information about the faucet's specifications, dimensions, and included parts, such as the ceramic cartridges, metal drain assembly and aerator. I'm ready to answer your questions about this product.
  • What is the warranty for residential installations?
    What is the warranty for industrial/commercial installations?
    What is the aerator flow rate?
DS Creations
Model Numbers Specification
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
SLC-8802-1.5 (SLC-4512-WINDS-1.5)
Two Handle Centerset Lavatory Faucet
Installation Guide
SLC-8802-1.5
Two Handle Centerset Lavatory Faucet
Two Handle Centerset Lavatory Faucet featuring 4" mounting
conguration shall include ceramic cartridges, 1/2" IPS inlet
connections, metal drain assembly and 1.5 gpm (5.7 L/min)
aerator. Faucet shall be made from metal construction,
plated in standard polished chrome nish.
Dimensions
Measurements
A 10-1/8", 257 mm
B 4", 102 mm
C 3-1/2", 89 mm
DDeck Thickness Ref.
Max. 2", 51 mm
E
(3x) Hole Size
Min. Ø 1", 25 mm
Max. Ø 1-1/2", 38 mm
F 5-1/2", 140 mm
GTo Backsplash
Min. 2", 51 mm
H 2-5/8", 67 mm
I 1-1/2", 38 mm
J 1/2-14 NPSM
Note: Dimensions subject to change without notice.
BB
CC
DD
HH
FF GG
EE
AA
JJ
II
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc. ■ symmons.com ■ [email protected] ■ ZV-2551 REV A ■ 050818
Parts Breakdown
Replacement Parts
Item Description Part Number
A
B
C
Handle
Set Screw
Escutcheon
SLC-WCW-KIT
D Lift Rod RL-230
E
F
Cold Cartridge
Hot Cartridge
KN-113
KN-114
G Aerator FLR-130-1.5-KIT
H
I
Mounting Nut
Optional Nut RL-048
J Metal Drain RL-154LR
A
B
C
D
E
F
G
H
I
J
Notes:
1) Apply a bead of silicone around the perimeter of trim installed
ush to sink.
2) Apply plumber tape to all threaded connections.
Tools Required for Installation
Adjustable Wrench
Allen Wrench:
Handle (2 mm)
Plumber Putty
Plumber Tape
Silicone
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
/