VENTS-US A 200 VRF Operating instructions

Type
Operating instructions
A_VRFwww.ventsus.com
Bodor Vents, LLC DBA: VENTS-US
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: (513)348-3853
A...VRF
series
INSTALLATION GUIDE
APPLICATION
For supply and exhaust ventilation, air conditioning and air heating.
Mounting in drop ceiling, dry walls and more.
DESIGN
Made of high quality plastic (ABS plastic or polystyrene).
Special aerodynamic disk valve design ensures uniform air distribution.
Easy mounting with spacing lugs and mounting flange with a lock ring.
The internal part has a sealing ring for more tight fit.
Equipped with a mounting flange and a lock ring for easy connection to round 4-8 inch air ducts.
Mounting flange is fixed to false ceiling with screws.
Lock ring provides easy fixing of the flexible air duct on a mounting flange.
INSTALLATION
TOOLS REQUIRED
Phillips screwdriver Pencil Screws 4 pc for 3/16” openings
Utility Knife
1. TRACE THE HOLE. 2. CUT THE HOLE AND INSERT THE COLLAR.
A_VRFwww.ventsus.com
Bodor Vents, LLC DBA: VENTS-US
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: (513)348-3853
3. ATTACH THE COLLAR TO THE DROP CEILING WITH
SCREWS OR LOCKING RING.
4. PLACE THE CLAMP OVER THE DUCTING.
5. ATTACH THE DUCTING TO THE COLLAR AND TIGHTEN
THE CLAMP.
6. ATTACH THE AIR DIFFUSER TO THE COLLAR.
Rotate diffuser central part clockwise to reduce airflow or
counterclockwise to enhance.
  • Page 1 1
  • Page 2 2

VENTS-US A 200 VRF Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI