Dura-Trel 11197 Installation guide

Type
Installation guide
Model#
11197
Assembly Instructions
Part # Description
max 5 x 3.5
1 2" sq. x 84" Left Post
2 2" sq. x 84" Right Post
3 ⅞ x 1½ x 27½" Bottom Cross Rail
4 ⅞ x 1½ x 27½" Center Cross Rail
5 1 x 1 x 60" Vertical Rail
6 1½ x 4 x 72" Arbor Top Rail
7 ⅞ x 3 x 26¼" Arbor Top Cross Rail
8 ⅞ x 1½ x 72" Overhead Rail
9 Hardware Bag
(includes:)
4" Arbor Top End Cap
2" sq." Post Cap
⅞ x 1½" End Cap
¾" Painted Screw
Super Glue Tube
PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY.
10
Arbor Ground Anchor Kit (includes:)
IMPORTANT: Check boxes for Contents Listed
16" Steel Ground Anchor (L-Shaped)
Check inside of parts as some parts are packaged
#8 - 1" Painted Self Tapping Screw
inside of others
In the event of missing, damaged or defective parts
please call our customer service dept. at 1-877-258-6020
When assembling components, place on a clean, flat
non-abrasive surface to avoid scratches
Battery or Electric Drill with #2 phillips bit
Tape Measure
Hammer or Rubber Mallet (recommended)
Shovel or Post Hole Digger (recommended)
PVC, Super, or Crazy Glue
150 Birch Road
1
4
8
Bakersfield Arbor
3
2
6
4
6
2
8
Qty
2
General Information
4
1
6
24
1
4
Tools Required
1-877-258-6020
1
P.O. Box 122
Sheboygan Falls, WI 53085
www.dura-trel.com
sales@dura-trel.com
1
  • Page 1 1
  • Page 2 2

Dura-Trel 11197 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI