SECO-LARM SD-995JA-11Q Owner's manual

SD-995JA-11Q

SD-995C Series Door Strike Installation Jig

Manual

Overview:

PITGW1

MiSD-995JA-11Q_141107.docx

NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is

one of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without notice.

This material may not be reproduced or copied, in whole or in part, without the written permission of SECO-LARM.

WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for 1 (one)

year from the date of sale to the original customer.

SECO-LARM U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Website: www.seco-larm.com

Phone: (949) 261-2999 | (800) 662-0800

The Installation Jig provides increased accuracy in cutting metal door frames and

mounting SD-995C series door strikes.

Door Latch

Centerline

Mark

Drill and tap holes in

frame for attaching jig

using screws from

door strike

(later used for door

strike mounting tabs)

Door frame

cutout area