Page is loading ...
Clinton reserves the right, without notification, to make changes in product design & specification.
CE-RP5
User Manual
clintonelectronics | 6701 Clinton Road Loves Park, IL 61111 | 800.549.6393 (Support) | www.clintonelectronics.com
v.05.04.18
6. POWER ON DEVICE
8. VIEW MENU AND FILES
The recorded content can be viewed on the attached display by using the
included remote control, or by removing the SD card and viewing on your PC.
If removing the card, first power down the device to avoid file corruption.
Gently guide the CE-RP5’s cables into the PVM, and slide the back cover
back into place.
7. REPLACE BACK COVER
Attach the main power cord to the PVM. Turn the CE-RP5 power switch to
the ON position. The Record, and Power lights on the front of the CE-RP5 will
illuminate.
8. VIEW MENU AND FILES
The recorded content can be viewed on the attached display by using the
included remote control, or by removing the SD card and viewing on your PC.
If removing the card, first power down the device to avoid file corruption.
on/o
OSD
REC EXIT PLAY MENU/ENTER
6 LED-
5 LED+
4 GND
3 MOTION OUT
2 GND
1 ALARM IN
REC
PWR
H.264 FULL HD-SDI RECORDER with converter
REC EXIT PLAY MENU/ENTER
6 LED-
5 LED+
4 GND
3 MOTION OUT
2 GND
1 ALARM IN
REC
PWR
H.264 FULL HD-SDI RECORDER with converter
Clinton Electronics | CE-RP5 User Manual
01
clintonelectronics | 6701 Clinton Road Loves Park, IL 61111 | 800.549.6393 (Support) | www.clintonelectronics.com
v.05.04.18
6. POWER ON DEVICE
8. VIEW MENU AND FILES
The recorded content can be viewed on the attached display by using the
included remote control, or by removing the SD card and viewing on your PC.
If removing the card, first power down the device to avoid file corruption.
Gently guide the CE-RP5’s cables into the PVM, and slide the back cover
back into place.
7. REPLACE BACK COVER
Attach the main power cord to the PVM. Turn the CE-RP5 power switch to
the ON position. The Record, and Power lights on the front of the CE-RP5 will
illuminate.
8. VIEW MENU AND FILES
The recorded content can be viewed on the attached display by using the
included remote control, or by removing the SD card and viewing on your PC.
If removing the card, first power down the device to avoid file corruption.
on/o
OSD
REC EXIT PLAY MENU/ENTER
6 LED-
5 LED+
4 GND
3 MOTION OUT
2 GND
1 ALARM IN
REC
PWR
H.264 FULL HD-SDI RECORDER with converter
REC EXIT PLAY MENU/ENTER
6 LED-
5 LED+
4 GND
3 MOTION OUT
2 GND
1 ALARM IN
REC
PWR
H.264 FULL HD-SDI RECORDER with converter
DEVICE OVERVIEW:
1. HD-SDI Output
2. HDMI monitor output
3. Analog Output
4. DC12 Volt Power Input
5. OSD Menu Navigation Buttons (Up, Right, Down)
6. LED Output- Connect a single LED diode to LED + / LED-, which will illuminate in conjunction with the main
recording LED on the front of the device.
7. Event Alarm Output- Connect #4 GND / Motion Out : This is a normally closed alarm output which will become
open when triggered by a motion or by an alarm event input.
8. Alarm Input - Connect wires to #1 GND / Alarm In: This alarm input can be configured to Normally Open /
Normally Closed in the OSD Menu under Power On Setup.
9. USB Service Port - To be used by service personnel only
10. SD-Card Input
11. Record / Power LED Indicator lights
12. IR remoter control sensor (side)
13. Power switch
14. HD-SDI Input
6
7
8
1
2
3
4
13
9
14
11
10
12
Device Overview
5
Clinton Electronics | CE-RP5 User Manual
02
OSD
NAVIGATION ARROWS
EXIT
PLAY/PAUSE
MENU/ENTER
RECORD
OSD ON / OFF
REMOTE OVERVIEW:
1. Navigation Arrows- Use to move Up, Down, Left, Right within the OSD menu
2. Menu /Enter- Press to enter OSD menu, and for OSD selection
3. Play / Pause - Press once to enter playback mode. Press again when in playback mode to pause
4. Record- Press to start manual recording
5. Exit- Press to stop manual recording, or to exit a current menu selection
6. OSD ON/ OFF- Press to hide or show the menu information (date, time, resolution, etc.)
Remote Control
Clinton Electronics | CE-RP5 User Manual
03
v.05.04.18
1. ATTACH CABLES
clintonelectronics | 6701 Clinton Road Loves Park, IL 61111 | 800.549.6393 (Support) | www.clintonelectronics.com
CE-RP5
Install Guide
Included Items:
• 1-Channel DVR
• Phillips Head Screws x 4
• Cables (HDMI, HD-SDI, Power)
• SD-Card
• Remote
• Instructions
*Information in this document is subject to change without notice
Required Items:
• #1 Phillips Head Screwdriver
3. INSERT SD-CARD
Insert the included SD-Card into the slot on the side of the CE-RP5. SD-Card
label should face toward the front of the CE-RP5.
4. POWER ON DEVICE
Turn the CE-RP5 power switch to the ON position. The Record, and Power
lights on the front of the CE-RP5 will illuminate to indicate proper function.
REC EXIT PLAY MENU/ENTER
6 LED-
5 LED+
4 GND
3 MOTION OUT
2 GND
1 ALARM IN
REC
PWR
H.264 FULL HD-SDI RECORDER with converter
64
REC EXIT PLAY MENU/ENTER
6 LED-
5 LED+
4 GND
3 MOTION OUT
2 GND
1 ALARM IN
REC
PWR
H.264 FULL HD-SDI RECORDER
with converter
RE
C
E
XIT
PL
AY
M
ENU/E
X
I
T
RE
C
P
W
R
H
.2
6
4
F
ULL
H
D-SD
I
R
E
C
O
R
D
E
R
w
i
th
c
onv
e
r
t
e
r
6
.
L
E
D-
5
.
LE
D
+
4.
G
N
D
3
.
M
O
T
ION
O
UT
2
.
G
N
D
1
.
AL
A
RM
I
N
OFF
ON
DC12V IN
HD-SDI IN
HD-SDI HDMI COMPONENT
VIDEO OUTPUT
Basic Setup
BASIC SETUP:
1. Connect barrel plug from DC12 Volt 1 Amp Power supply to device. *Power supply sold separately.
2. Plug outlet from DC12 Volt Power Supply into wall outlet/power source.
3. Connect HD-SDI from camera to HD-SDI Input.
4. Connect Video Output (HD-SDI, HDMI, or Analog) to corresponding output, and connect other end to Monitor.
2
3
1*
4
Clinton Electronics | CE-RP5 User Manual
04
v.05.04.18
1. ATTACH CABLES
clintonelectronics | 6701 Clinton Road Loves Park, IL 61111 | 800.549.6393 (Support) | www.clintonelectronics.com
CE-RP5
Install Guide
Included Items:
• 1-Channel DVR
• Phillips Head Screws x 4
• Cables (HDMI, HD-SDI, Power)
• SD-Card
• Remote
• Instructions
*Information in this document is subject to change without notice
Required Items:
• #1 Phillips Head Screwdriver
3. INSERT SD-CARD
Insert the included SD-Card into the slot on the side of the CE-RP5. SD-Card
label should face toward the front of the CE-RP5.
4. POWER ON DEVICE
Turn the CE-RP5 power switch to the ON position. The Record, and Power
lights on the front of the CE-RP5 will illuminate to indicate proper function.
REC EXIT PLAY MENU/ENTER
6 LED-
5 LED+
4 GND
3 MOTION OUT
2 GND
1 ALARM IN
REC
PWR
H.264 FULL HD-SDI RECORDER with converter
64
REC EXIT PLAY MENU/ENTER
6 LED-
5 LED+
4 GND
3 MOTION OUT
2 GND
1 ALARM IN
REC
PWR
H.264 FULL HD-SDI RECORDER
with converter
RE
C
E
XIT
PL
AY
M
ENU/E
X
I
T
RE
C
P
W
R
H
.2
6
4
F
ULL
H
D-SD
I
R
E
C
O
R
D
E
R
w
i
th
c
onv
e
r
t
e
r
6
.
L
E
D-
5
.
LE
D
+
4.
G
N
D
3
.
M
O
T
ION
O
UT
2
.
G
N
D
1
.
AL
A
RM
I
N
OFF
ON
DC12V IN
HD-SDI IN
HD-SDI HDMI COMPONENT
VIDEO OUTPUT
BASIC SETUP:
5. Insert SD-Card with contacts facing down, as shown below.
6. Turn the Power switch on the side of the device to ON. Power, and record LEDs should illuminate green.
Basic Setup
This device is factory set to record on motion events only. To record on alarm, calendar,
or schedule, make changes in the Schedule Record menu.
NOTICE
Maximum SD Card
size is 128GB
NOTICE
v.05.04.18
1. ATTACH CABLES
clintonelectronics | 6701 Clinton Road Loves Park, IL 61111 | 800.549.6393 (Support) | www.clintonelectronics.com
CE-RP5
Install Guide
Included Items:
• 1-Channel DVR
• Phillips Head Screws x 4
• Cables (HDMI, HD-SDI, Power)
• SD-Card
• Remote
• Instructions
*Information in this document is subject to change without notice
Required Items:
• #1 Phillips Head Screwdriver
3. INSERT SD-CARD
Insert the included SD-Card into the slot on the side of the CE-RP5. SD-Card
label should face toward the front of the CE-RP5.
4. POWER ON DEVICE
Turn the CE-RP5 power switch to the ON position. The Record, and Power
lights on the front of the CE-RP5 will illuminate to indicate proper function.
REC EXIT PLAY MENU/ENTER
6 LED-
5 LED+
4 GND
3 MOTION OUT
2 GND
1 ALARM IN
REC
PWR
H.264 FULL HD-SDI RECORDER with converter
64
REC EXIT PLAY MENU/ENTER
6 LED-
5 LED+
4 GND
3 MOTION OUT
2 GND
1 ALARM IN
REC
PWR
H.264 FULL HD-SDI RECORDER
with converter
RE
C
E
XIT
PL
AY
M
ENU/E
X
I
T
RE
C
P
W
R
H
.2
6
4
F
ULL
H
D-SD
I
R
E
C
O
R
D
E
R
w
i
th
c
onv
e
r
t
e
r
6
.
L
E
D-
5
.
LE
D
+
4.
G
N
D
3
.
M
O
T
ION
O
UT
2
.
G
N
D
1
.
AL
A
RM
I
N
OFF
ON
DC12V IN
HD-SDI IN
HD-SDI HDMI COMPONENT
VIDEO OUTPUT
Clinton Electronics | CE-RP5 User Manual
05
1. Current Date & Time Information
2. Record Mode & Status
(C) - Continuous (schedule) Recording
(H) - Manual Recording
(A) - Alarm Event Recording
(M) - Motion Event Recording
3. Video Input Resolution - Resolution and frame rate of connected HD-SDI camera.
Changing the recording resolution/frame rate will not eect this input resolution/
frame rate, nor will it eect the device’s output resolution/frame rate.
Menu Icons Explained - Live View
DVR Menu Navigation:
• Press MENU/ENTER to open the OSD menu
• Press UP or DOWN on the remote control
to navigate
• To confirm or make a selection, press the
MENU/ENTER button
• Press the LEFT or RIGHT buttons to change
the value
• Press the EXIT button to go back to the
previous menu screen and to exit the OSD
Menu.
Camera Image
05 / 30 / 2018 10:53:44 1080P30
(C) RECORDING
Live View
1
2
3
Clinton Electronics | CE-RP5 User Manual
06
Camera Image
1
2
Menu Icons Explained - Playback View
Playback View
1. Current Date & Time Information
2. Playback Mode
- Play
- Pause
- Fast Forward / Rewind
- Slow Playback
3. Playback Speed
4. Record Mode
5. Recorded Video Resolution
- 1920x1080
- 1280x720
6. Recorded Video Quality
- Basic Quality
- Normal Quality
- High Quality
7. Timestamp / Watermark
Alarm input
Motion
Calendar
Manual
Pre-Record
05 / 30 / 2018 10:53:44
05 / 30 / 2018 10:53:44
1920
1080
2x
3
4
5
6
7
Clinton Electronics | CE-RP5 User Manual
07
Normal Playback: While in Live View press the Play/Pause button on the remote control to play video.
Playback on PC:
• Eject the DVR SD Card.
• Insert SD Card into computer.
• On your computer, select the SD Card folder. Search through the segmented files to find your desired clip.
• Open the clip in Windows Media Player to view. Clips are in AVI format.
The last file on the SD Card may be corrupted due to pulling it from the unit. This 3MB file will not aect the
desired recording as it is only the last few seconds before the SD Card was pulled.
AVI video files are not viewable on Apple/MAC computers.
Normal Playback Speed
Fast Forward / Fast Rewind
During normal playback, press Fast Forward or Fast Rewind button in the same direction
again to increase the search speed (Speed: x2/ x4/ x8/ x16/ x32). Press Play/Pause button to
playback at normal speed
Pause
Slow Playback (frame by frame)
After PAUSE, press Fast Forward/Rewind buttons to search frame by frame
Event List Playback: From the DVR Menu, choose Search & Play to choose which video to playback. Select the
desired date, and then select from one of the available files for playback.
DVR - Date & Time Setup / Motion Detect
Clinton Electronics | CE-RP5 User Manual
08
DVR - Date & Time Setup / Motion Detect
Date Format: Adjust the display of date - Month/Day/Year, Year/Month/Day, Day/Month/Year
Set Year / Month / Date / Time: Adjust the time and date information.
DST: Day Light Savings Time - On/O
Set MD Area: Areas in highlighted in RED will detect motion. Use the arrow buttons to select desired cell(s).
Pressing the MENU button will turn On/O the selected motion detection cell. To change the Mode of selection
press the REC button.
• Cell Edit: Turn On/O cells individually
• DEL Block: Turn O large blocks of cells
• DEL All: Turn all cells O
• Add Block: Turn On large blocks of cells
• Add All: Turn all cells On
Set MD Sensitivity:
• MD Energy: Displays current recognized motion. Motion is displayed as RED blocks.
• MD Threshold: Press Left or Right on the remote control to adjust the sensitivity of motion detection. The lower
the value, the more motion will be detected.
DATE & TIME
MOTION DETECT
REC
SET DATE / TIME
DATE FORMAT : M / D / Y
SET YEAR : 18
SET MONTH : 5
SET DAY : 30
SET TIME : 12 : 00 : 00
DST : ON
Clinton Electronics | CE-RP5 User Manual
09
DVR - Manual Record / Schedule Record
Schedule Setup:
• Schedule: Turn Schedule Recording On/O. The Schedule map is laid out in hours of the day. Each hour can have
a dierent type of recording mode set to it. Navigate between the hours using the UP or DOWN button on the
remote. Press the LEFT or RIGHT button to change the recording type; Alarm, Motion, Continuous (Calendar),
All Modes, or No modes.
MANUAL RECORD
The DVR has multiple recording modes; Manual, Schedule, Event & Continuous. Each recording mode has
individual options for recording quality.
Manual Recording occurs when the REC button on the remote is pressed. To stop Manual recording press the
EXIT button.
SCHEDULE RECORD
Adjust the dierent settings of Schedule, Event/Motion & Continuous Recording modes.
SCHEDULE RECORD
1920x1080 25 FPS
1920x1080 25 FPS
1920x1080 25 FPS
SCHEDULE SETUP >
EVENT RECORD >
CONTINUE RECORD >
ALARM
MOTION
CONTINUOUS - CALENDAR
ALL
NONE
MANUAL RECORD
VIDEO SIZE : 1920x1080
FRAME RATE : 25 FPS
QUALITY : HIGH
Recording Modes
Clinton Electronics | CE-RP5 User Manual
10
DVR - Schedule Record / SD Card Options
Event (Alarm & Motion) Record: Adjust the video quality for motion and alarm input recording.
Continuous (Calendar) Record: Adjust the video quality for continuous recording. Hours for continuous recording
can be set up in the Schedule Record/Schedule Setup section.
Disk Total: Displays the total capacity of the installed SD Card.
Disk Remain: Displays the total available remaining space on the SD Card.
Max File Size: Set the file size limit for recorded video files. Once the limit is reached a new file will start to record.
Card Full: Choose between LOOP or STOP.
• LOOP: Oldest files will be overwritten when the card is full.
• STOP: When the card is full, recording will stop.
Format: Formats the SD Card to FAT32. All information saved on the SD Card will be deleted!
SCHEDULE RECORD continued...
SD CARD OPTIONS
EVENT RECORD
VIDEO SIZE : 1920x1080
FRAME RATE : 25 FPS
QUALITY : HIGH
DURATION : 10 SEC
PRE-RECORD : 05 SEC
CONTINUE RECORD
VIDEO SIZE : 1920x1080
FRAME RATE : 25 FPS
QUALITY : HIGH
Clinton Electronics | CE-RP5 User Manual
11
DVR - System Status / Power On Setup / Factory Default
SYSTEM STATUS
Quickly view firmware information and recording settings.
POWER ON SETUP
Change the language, video format and alarm input type as needed. NOTE: If connecting to a DVR, it may be
necessary to change the “TV Output” to 1080p30.
FACTORY DEFAULT
Reset all DVR settings to factory default. Date & time information will not be reset.
SYSTEM STATUS
VERSION : V2.0101
SD FULL : LOOP
1920x1080 25FPS
1920x1080 25FPS
1920x1080 25FPS
1920x1080 25FPS
POWER ON SETUP
LANGUAGE : ENGLISH
TV OUTPUT : 1080I60
PASSWORD : 0 0 0 0
ALARM INPUT : N.C.
Clinton Electronics | CE-RP5 User Manual
Actual product may vary slightly from the images shown in this manual.
Clinton reserves the right, without notification, to make changes in product design & specification.
ver: 06.06.18
Clinton Electronics
6701 Clinton Road
Loves Park, IL 61111
Technical Support:
1-800-549-6393
Monday~Friday 8am~5pm (Central Standard Time)
www.clintonelectronics.com
CE-RP5
User Manual
/