Haier LE65Q6500U User manual

Category
LCD TVs
Type
User manual

This manual is also suitable for

LE65Q6500U
LE50K6500U
Welcome
Important Information
01 Safety Warnings
2
2
Safety notice
Warning and cautions
3
4
Main Parameter
Base Stand Assembly Instruction
02 Introduction
5
7
Wall Mounting Installation Guidelines
Front Control Panel
8
9
Rear/Side Sockets
9
Connecting to your Haier TV
Common Interface
10
12
Remote Control
03 Remote Control
13
Basic Operation
04 Operation
14
SETTINGS 15
APPS 15
SOUND MENUS 16
Channel 16
Network
17
Time
17
System
18
About TV
18
Trouble shooting
05 Trouble shooting
25
Specification 28
06 Specification
Media TV
18
IMPOR
TANT INFORMATION
READ ALL INSTRU
CTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.
FOR ANY PROBLEMS, REFER SERVICING TO THE CUSTOMER HELP LINE. THERE IS A LIGHTNING ARROW SYMBOL IN
THE TRIANGLE: THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF
CONTACT WITH ANYINSIDE PART OF THIS PRODUCT.
THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE
CONCERNING OPERATION AND MAINTENANCE HAS BEEN INCLUDED WITH THIS PRODUCT.
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR
SOURCES OF HUMIDITY. DO NOT USE ANY ABRASIVE CLEANERS WHICH MAY SCRATCH OR DAMAGE
THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.
NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORISED AND COULD LEAD TO INJURY OR PRODUCT
DAMAGE. REFER ALL SERVICING TO THE CUSTOMER HELPLINE.
Now you can get star
ted!
01 Safety warnings
Thanks for buying this 50"/65" LED LCD TV. This guide will help you set up and begin using your TV.
50" UHD Digital LED LCD TV
Remote control
Instruction Manual
AAA ba x2ttery
Stand
Quick start guide
65" UHD Digital LED LCD TV
Remote control
Instruction Manual
AAA ba x2ttery
Stand
Quick start guide
Safety notice
EN-3
Warning: To avoid any injury caused by lean
of the product, please always ensure the
whole product was placed within the table
surface in horizontal.
CAUTION:When the apparatus was in
electrostatic circumstance, it maybe
malfunction and need to reset by user.
Dim: 515*3 20mm( 包括底 座)
Warning
High voltages are used in the operation of this
television receiver. Do not remove the cabinet
back from your set. Refer servicing to qualified
service personnel.
Warning
To prevent fire or electrical shock hazard, do
not expose the television receiver to rain or
moisture.
Warning
Do not drop or push objects into the
television cabinet slots or openings. Never
spill any kind of liquid on the television
receiver.
Caution
Do not block the ventilation holes in the back
cover. Adequate ventilation is essential to
prevent failure of electrical components.
Caution
Do not trap the power supply cord under the
television receiver.
Caution
Never stand on, lean on, or suddenly push the
television or its stand. You should pay special
attention to children. Serious injury may result if
it should fall.
Caution
Do not place your television on an unstable cart,
stand, shelf or table. Serious injury to an
individual , and damage to the television, may
result if it should fall.
Caution
When the television receiver is not used for an
extended period of time, it is advisable to
disconnect the AC power cord from the AC
outlet.
Caution
If the television is to be built into a compartment
or similar enclosure, the minimum distances must
be maintained. Heat build-up can reduce the
service life of your television, and can also be
dangerous.
WARNING AND CAUTIONS
EN-4
Panel
PAL-B/G ,I , D/K
PAL/SECAM/MPEG2/MPEG4/H.265
AC 100
-
240 V 50/60Hz
High-Definition Multimedia Interface (HDMI) x 3
AV Input x 1
YPbPr Inputx 1
136W
50"
CI x 1
RF x 1
USB x 2
LNB IN x 1
Composite video input >=350
YPbPr >=400
Headphone x 1
TV System
Video Signal System
Input Power Voltage
Power consumption
Standby Power consumption
Audio Output Power(THD7%)
Signal Input
Signal output
Horizontal definition (TV line)
SECAM-B/G , D/K , L ,
0.50W
DVB-T, DVB-C,DVB-T2,DVB-S2
INSTALLATIONCAUTION
*Locate the TV in the room where light does
not strike the screen directly.
*Total darkness or a reflection on the picture
screen can cause eyestrain. Soft and indirect
lighting is recommended for comfortable
viewing.
*Allow enough space between the TV and the
wall to permit ventilation.
*Avoid excessively warm locations to prevent
possible damage to the cabinet or premature
component failure.
*Do not cover the ventilation openings when
using theTV.
Main parameter
Main features
4 NICAM
5 T ime-shift
3
HDMI interface
High luminance, wide viewing
angle
2
Used as Television, display terminal,
1
Never tamper with any components inside the
TV, or any other adjustment controls not
described in this manual. All LED-TV's are high
voltage electrical equipment.
When you clean dust or any water drops off the
SCREEN or CABINET or around any of the
buttons or connectors, the power cabled should
be removed from the power socket. Wipe the TV
with a soft, dry, dust free cloth.
During thunderstorms, unplug the power cable
and aerial / antenna cable to prevent damage to
your TV and any other devices connected to it.
All repairs to this TV should only be performed
by qualified TV service
personnel.
02 Introdution
Introduction
EN-5
1000(DTV);100(ATV)Storage channel number
Optical Output x 1
2x10W
LAN Input x 1
65"
206W
0.50W
2x10W
SUPPORTED MODE
HDMI
3
5
1360x768
1920x1080
60
60
1
800x600
60
37.88
2
1024x768
60
48.36
47.7
67.5
RESOLUTION
V.Freq.(Hz) H.Freq.(KHz)
4
1280x768
60
47.3
Introduction
EN-6
6
3840x2160 30
67.5
7
3840x2160 50
112.5
8
3840x2160 60
135
Base Stand Assembly Instruction
1. Place the panel side of TV on the platform and insert the two stands into TV, making the screws holes of
stands correspond to the right holes of TV.
2. Fix screws on the bottom of back cover, one for each side, assembly finished.
INSTALLATION NOTES
Locate the TV in a room where light does not strike the screen directly. Total darkness or a
reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
Please do not attempt to rotate the TV on the stand.
Introduction
EN-7
M4X14MM M6X18MM
(50") (65")
WALL MOUNTING INSTALLATION GUIDELINES
2.Use the four screws provided to fix the TV onto a wall mounting bracket (not included)
via the four VESA standard holes on the back of the television.
Introduction
EN-8
This television can be wall mounted as follows:
1.Place the LED LCD Television onto a solid surface. Please place some soft material over the front of
the screen to protect it from any damage.
200mm
200mm
M6X12mm
M6X12mm
M6X12mm
M6X12mm
400mm
200mm
M6X12mm
M6X12mm
M6X12mm
M6X12mm
(50")
(65")
HDMI3(ARC)
LNB INRF
Introduction
Front control panel
EN-9
1: Remote control sensor.
2: Indicator LED: RED STANDBY.
3: Key board
3
2
1
8m
Rear/Side Sockets
1
2
input
3
USB
input
4
input
5
8
HEADPHONE
input
9
HDMI1
analogue audio output
10
HDMI3(ARC)
input
11
Output
6
input
YPbPr
HDMI2
OPTICAL
7
input
input
1 2 3
4 5 7 4
8 9 10 12
LAN
RF
AV IN
COMMON INTERFACE(CI)
Bottom
On analog and digital TV, the channel
can be switched on and off.
In the absence of audio playback state,
press the volume up / down control.
Open the navigation menu
Navigation menu status
(If this model does not
have the corresponding
function, the icon is grey
and not optional)"
No dispaly in TV
TV Status Middle key Pull Up/Down Pull Left/Right
Navigation menu
Press to open the navigation menu,
press again to close the menu. If there is
no operation, the menu automatically
disappears after 5 seconds.
Press to enter the home page, standby,Press
the corresponding button, the corresponding
icon highlighted, to remind the user has been
operating successfully, and to achieve the
corresponding functions.
Press to enter the menu, input source,Press the
corresponding button, the corresponding icon
highlighted, to remind the user has been operating
successfully, and to achieve the corresponding
functions.
Menu, Home, or
Application status in TV
confirmation key on the remote control.
Short press for confirm,equal to the
return key on the remote control.
Long press to return, equal to the
to the Up/Down key on the remote control.
Achieve up and down buttons function,equal
to the Left/Right key on the remote control.
Achieve left and right buttons function,equal
the standby state
Press to power on
Other states
key on the remote control. If the media video
player, can be played and suspended, and
pop-up setting menu.
Press to confirm,equal to the confirmation
to the Pull Up/Down key on the remote control.
Achieve up and down buttons function,equal
Left/Right key on the remote control. If it is in the case
of the pop-up media video player setting menu,
achieve fast forward and fast rewind function.
Achieve left and right buttons function,equal to the
input
6
11
12
input
LNB IN
Introduction
Connecting to your Haier TV
G Green (Y)
B Blue (Pb/Cb)
W White(AUDIO-L )
R Red (AUDIO-R, Pr/Cr)
Y Yellow (VIDEO)
EN-10
CVBS, DVD Player or other
machine with YPbPr/YCbCr.
G R
B
Audio/Video machine
with HDMI interfaces
R
Y
W
CVBS, DVD Player or other
machine with CVBS/S-Video.
1WAN 2
3
4
Audio Receiver
HDMI3(ARC)
LNB INRF
EN-11
Introduction
Connecting a DVD player / Satellite / cable
set top box receiver / games console /
Laptop
There are several options to connecting a DVD
player / Satellite or Cable set top box receiver /
games console / Laptop to your TV.
Option 1 HDMI
If the device you want to connect to the
is switched on, switch off the device first.
Connect a HDMI cable (not supplied) from
the HDMI socket on the TV to the DVD player cable
receiver or games consol.
Switch on the device you have just
connected to the TV
To select the device connected with the
HDMI cable press the SOURCE button on the
remote and use thekeys to select HDMI and
press the OK button.
Option 2 AV Audio Visual
(Yellow/White/Red)
Make sure that both TV and the device are
switched off before connecting.
Connect the AV cables (not supplied) from
the Video (yellow) and Audio (white, red)
sockets on the TV to the DVD player or games
console etc.
To select the device connected with the
AV cable press the SOURCE button on the
remote and use thekeys to select AV and
press the OK button.
Option 3 COMPONENT
(Green/Blue/Red)+(White/Red)
Make sure that both TV and the device are
switched off before connecting.
TV
Connect the cables (not supplied) from the
COMPONENT IN sockets Y, Pb, Pr (green,
blue, red) and L-Audio-R (white, red) on the TV
to the DVD player or games console etc.
To select the device connected with the
COMPONENT cable press the SOURCE button on the
remote and use the keys to select and
press the OK button.
Option 4 USB
Most USB sticks can be connected to your TV
and some digital cameras may also work.
Connect USB stick (not supplied) or a USB
cable (not supplied) to the TV.
To select the USB device connected to the TV,
press the SOURCE button on the remote and
use the keys to select USB and press the
OK button.
Note1:Only *.jpg and *.mp3 files will work,
other file types are not guaranteed and may not.
Note 2. Apple iPhones and iPods are not
compatible with your TV.
Note 3. When connecting any device to the USB
connection, keep the USB cable length as short
as possible.
Option 5
Option 6
YPbPr
LAN INPUT
Connects your TV to the internet router by an Ethernet
cable.This is for future services such as the red
button,and on demand / catch up TV services.
Option 7 OPTICAL OUTPUT
Use an optical cable to connect the TVs OPTICAL
socket to an external audio receiver’s audio coaxial
input socket.Plug the connected devices into the
mains socket before switching on the TV.
HEADPHONE OUTPUT
Insert the plug of the earphone into the headphone
socket on the TV. The TV speakers are now muted.
Alternatively you can also plug in external speakers if
required.
Connecting to your Haier TV
EN-12
The common interface (CI) slot is designed to
accept the conditional Access (CA) Module and
Smart card in order to view the pay TV
programmes and additional services.
Contact your Common Interface service provider
to get more information about the modules and
subscription.
Please noted that CA modules and smart cards
are neither supplied nor optional accessories
from us.
COMMON INTERFACE
Introduction
CI Modules has been Removed
Press the MENU button and press the buttons
to select the Channel , then press OK to enter the
Channel submenu. Press the buttons to select
CAM Setting, then press button to enter the CAM
Setting submenu.
◄ ►
/OK
03 Remote Control
Remote Control
EN-13
Programme Edit: Delete, Rename, Move, Skip.
EPG: Record, Info, Schedule, Reminder.
Press to open Menu App Page.
Press to open the Home Page.
Press to open the YouTube.
10
16
17
18
19
21
22
24
25
20
23
Press to turn the TV on or off.
(Power)
S.MODE
Press to select the sound mode.
P.MODE
Press to select the picture mode.
0-9
Press to enter a channel number
or password.
Q.VIEW
Press to switch to the last viewed
channel.
Press to open the on-screen menu. In
teletext mode, press to open the INDEX
page.
Press to navigate the on-screen menu.
Press to confirm a selection.
OK
Press to return to the previous screen.
In teletext mode,press to enter mix
mode.
SOURCE
Press to open the input source list.
CH
Press to change the channel.
Press to display the channel information.
In teletext mode,press to revealthe
hidden information.
Press to open the channel list.In teletext mode,
press to switch the image to top,bottom or full.
Press to close the on-screen menu.In teletext
mode,press to hide the text.
Press to stop multimedia playback, REC& Timeshift
mode.
GUIDE
Press to display electronic programme guide
in TV mode. Press to enter the teletext subpage.
(REC)
Press to record the TV program you are watching
in DTV mode.
(Mute)
Press to turn the sound on or off.
TOOL
Press to open the shortcut menu of tool.
VOL +/-
Press to adjust the volume level.
APP
Press to open a favorite channel list. In teletext
mode, press to hold a page.
(reverse)
Press to reverse playback in multimedia & Timeshift
mode.
Press to play in multimedia mode & Timeshift mode.
(Play)
(forward)
Press to fast forward in multimedia & Timeshift mode.
Press to pause in multimedia mode & Timeshift
mode.
(Pause)
Insert Batteries into the Remote Control
1. Remove the battery cover.
2. Inserting the 2 AAA 1.5V batteries making sure the polarity
(+ or -) of the batteries matches the polarity marks inside the unit.
3. Mount the battery cover. Replace with new batteries when the
TV set begins to show the following symptoms:Operation is
unsteady or erratic. Sometimes the TV set does not function
with Remote Control Unit.
Remark:
1) Alkaline Battery Recommeded.
2) Remove batteries when they are exhausted or if the remote
control is not to be used for long time.
Coloured
buttons
Operation
04 OPERATION
Power supply to switch on/off this Unit.
Before switch on, ensure that all connections will be proper
and correct.Press the Key at the bottom of the panel of this
Unit to turn on this Unit.Press the Key to show Menu and
select Power Logo to turn off this Unit.When the power
indicator turns red, this Unit accesses standby state.
Basic Operation
Press key to start this Unit.The power indicator turns
Press key once again to switch off this Unit.
If there is no signal for the current signal source, this unit will
automatically set to the standby state minutes later.
If not to use the main Unit for a long time, unplug the AC
power cord from the AC outlet.
off.
15
Select input signal sources
After turn on the main unit, press source to select proper input
source. Press ▼/▲ button to select the main signal source.
Press OK button to confirm.
Installation Guide
The installation guide only appear when the TV first time turn
on or reset to factory set .
Please according to the Text Tip to First Time Setup.
After setting is complete, You can watch TV .
EN-14
Operation
Teletext Schedule List
Picture
1.Press ▼ /▲ button to select the option that you want to
adjust in the PICTURE menu.
2.Press Enter button to adjust.
3.After finishing your adjustment, Press Enter button to
save and return to the previous menu.
1. APPS
Press the MENU button and then press▼/▲/
button to select the Apps and then press the OK button.
/
Press ▼ ▲/ button to select the APP./ /
2. SETTINGS
1). Press the MENU button and then press ◀/▶ button to
select settings and then press the OK button.
Press ▼ ▲/◄ ► button to select the Home Page.
Press to select Apps in the HOME page.
/
/
2). Press ▲/▼ button to select submenu.
Audio Track
Subtitle Track
Picture Mode
Press /button to select Picture Mode, then
press / button to select. (Optional:
Standard/Personal/Dynamic/ Movie/Economy).
Note: Press PMODE to select Picture Mode quickly.
Standard The default mode, to make users experience
high-quality images under normal light.
Personal User-defined picture settings
Dynamic This mode is more suitable for watching
dynamic program
Movie Image colors more gentle to protect eyes
Economy Reduce screen brightness, improved contrast for
energy saving.
EN-15
Operation
Advanced Setting
Press /button to select Advanced Setting, then
press// / button to select.
OverScan
Colour Temp
Adjust the overall color of the image.Press/ to select
Colour Temp. press / to select.
(Optional:Cool/Standard/Warm).
Cool Produces a gentle blue-hued image.
Standard Produces a vivid image.
Warm Produces a red-hued image.
Dynamic Contrast
Adjust image contrast.Press▼/▲ to select, and
press / to adjust.
(Optional:Low/High/Off ).
Noice Reduction
Adjust image noice.Press▼/▲ to select,and
press / to adjust.
(Optional:Low/Medium/High/Off ).
NOTE: The following functions are available , When
select the personal in picture mode.
Aspect Ratio
Press / to select Aspect Ratio, press/to select.
(Optional:Auto,16:9,4:3,Zoom1,Zoom2).
3.Sound MENU
1).Press the MENU button and then press / button to
select the Sound menu and then press the OK button.
2).Press ▲/▼ button to select Sound Mode (Optional:
Standard/Music/ Theater/User).
Surround Sound
Press / button to select Surround Sound, then
press / button to choose ON/OFF.
Speaker
Press / button to select Speaker, then press //
/ button to adjust.
AVL
Press / button to select AVL, then press /
button to choose ON/OFF.
Advanced Setting
Press / button to Advanced Setting, then press /
button to adjust.
Balance
Adjust the left and right channel output balance.
Press / button to select Balance, then press/
button to adjust.
Audio Description
Press / button to select Audio Description, then
press / button to choose ON/OFF.
4. Channel
Press the MENU button and then press ◀/▶ button to
select the Channel and then press the OK button.
EN-16
Operation
3.3 Manual
Press / button to select Manual, then press
Enter/ button to enter.
Select the modulation/frequency/symbol rate/network
ID,and pres Auto Tuning to search the programs. First
searching the DTV ,press MENU to stop and searching
the ATV.
3.4 HbbTV
Press / button to select HbbTV, then press
Enter/ button to select ON/OFF.
5.Network
1.Press / button to select NETWORK in the main
menu.
2.Press/ button to select Network / Ethernat/
Network test/ Network Wake up.
1.Press / button to select the option that you want
to adjust in the CHANNEL menu.
2.Press Enter button to adjust.
3.After finishing your adjustment, Press Enter button to
save and return to the previous menu.
3.1 Antenna Type
Press / button to select Air or Cable.
3.2 Auto Scan
Press / button to select Auto Scan, then press
Enter/ button to enter.
3.Enternet
Press / button to select Enternet,then press
Enter/ button to enter.
4.Network Test
Press / button to select Network Test,then press
Enter/ button to enter.
5.Network Wake up
Press ▼ / ▲ button to select Network Wake up, then
press Enter/button to enter.
6. Time
Press the MENU button and then press ◀/▶ button to
select the Time menu and then press the OK button.
1.Press ▼ / ▲ button to select the option that you want to
adjust in the TIME menu.
2.Press Enter button to adjust.
3.After finishing your adjustment, Press Enter button to
save and return to the previous menu.
Time
Press / button to select Time, then press Enter/
button to enter.
On Time
Press/ button to select On Time, and set the default
source, the default channel , which would show on the
TV when turning on the TV.
Press ▼/▲// to set the time.
Off Time
Press ▼/▲ button to select Off Time to turn off the TV at
the time you set. And press ▼/▲// to set the time.
EN-17
Operation
Off Time
Press ▼/▲ button to select Off Time to turn off the TV at
the time you set. And press ▼/▲/◄ / ► to set the time.
Sleep Timer
Press ▼/▲ button to select Sleep Timer. (Optional:
off,10min,20min,30min,60min,90min,120min).
OSD Timer
Press ▼/▲ button to select OSD Timer, Press ◄ / ►to
select. (Optional: Never,10s,20s,30s,60s).
Auto Standby
Press/button to select Auto Standby, Press ◄/ to
select. (Optional: Off,3H,4H,5H).
7. System
Press the MENU button and then press ◀/▶ button to
select the System menu and then press the OK button.
1.Press ▼ / ▲ button to select the option that you want
to adjust in the SYSTEM menu.
2.Press Enter button to adjust.
3.After finishing your adjustment, Press Enter button
to save and return to the previous menu.
Country
Press / button to select Country, Press ◄/to
select country.
Language
Press ▼ / ▲ button to select Language. Press ◄ / ► to
select the display language.
Advanced Settings
Press▼/▲ button to select Advanced Settings.
Press ◄ / ► to select.
8. About TV
Press the MENU button and then press ◀/▶ button to
select the About TV menu and then press the OK
button.
System Information
Press ▼ /▲ button to select System Information, then
press ▼ /▲ button to enter.
Lock
Press ▼ / ▲ button to select Lock. Press to
select lock.
Press▼ /▲ button to select Lock, and press to
set. (The default password:0000).
Set Password
Press ▼/▲ button to select Set Password.
HDMI CEC
Press ▼ / ▲ button to select HDMI CEC. Press
◄ / ►to select.
Press ▼ / ▲ / ◄ / ►button to select following function
ON/OFF.
(Available function:CEC Control/Device Auto Power
Off/TV Auto Power on/HDMI ARC/Detect)
◄ / ►
◄ / ►
EN-18
Operation
System Upgrade
Press ▼ /▲ button to select System Upgrade, then
press ▼ /▲ button to enter.
Restore to Default
Press ▼/▲ button to select Restore to Default to the
default settings.
9. Media
Press ◄ / ►button to select MEDIA menu.
Press ◄ / ► button to select.
USB
Movie
Press /button to select Movie.
Music
Press ▼ /▲ button to select Music.
Photos
Press ▼ / ▲ button to select Photos.
EN-19
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26

Haier LE65Q6500U User manual

Category
LCD TVs
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI