Frigidaire FEB24S5ABF Owner's manual

Brand: Frigidaire

Model: FEB24S5ABF

Type: Owner's manual

This manual is also suitable for

Frigidaire FEB24S5ABF is a versatile appliance that offers a range of features to make cooking easier and more efficient. With its electronic oven control, you can set precise temperatures for baking and broiling, ensuring your food is cooked to perfection. The built-in minute timer allows you to keep track of cooking times without having to rely on an external timer.

The FEB24S5ABF also features an automatic oven timer that lets you program the oven to start and stop baking at specific times. This is perfect for busy households or for recipes that require precise cooking times. The oven lockout feature provides added safety, preventing accidental use and keeping children safe.

ELECTRONIC OVEN CONTROL

Control Pad Functions

Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the

various functions of the oven as described below. Note: The graphics on your timer may not look exactly like those shown.

This doesn't change the way it operates.

Note: The oven function will not work if the time of day clock is not set.

Clock Pad-

Used to set the

time of day.

Timer Pad- Used

to set or cancel the

minute timer, The

minute timer does

not start or stop _

cooking.

Start Time Pad-

Used to set the

desired start time

for baking Can be

used with BAKE /_

TIME to program a

delayed bake cycle.

Bake Time Pad-

Used to enter the

length of the baking

time,

Bake Pad- Used to

Up and Down arrow pads- Used along with the enter the normal

function pads to select oven temperature, cooking baking mode

time, start time (when programming an automatic bake _temperature.

time), time of day, clean time and minute timer. /

• Oven

b Preheat O

J• DoorLocked

Self-Cleaning Oven ,

Feature indicator

lights- These light

to show which

feature is in use.

Oven, Preheat & Lock lights- The "oven" light will glow each time the oven

unit turns on maintain the set oven temperature, The "Preheat" light will

glow when the oven is first set to operate, or if the desired temperature is

reset higher than the actual oven temperature. The "Door Locked" light will

flash until the door locks when the self-clean cycle is in use. it glows

constantly after the door locks.

Broil Pad- Used to

select the variable

broil function.

Clean Pad- Used to

selectthe self-

cleaning cycle.

Clear Pad- Used to clear any function previously

entered except the time of day and minute timer.

Push Clear pad to stop cooking.

The oven can be programmed to:

Bake normally, Time Bake, Delayed Bake, Broil, Self-Clean

Note: Push buttons or pads may be shaped differently.

For a silent control panel:

When choosing a function, abeep will be heard each time a pad ispushed. If desired, the controls can be program med for silent

operation. Push and hold START TIME pad. After 7 seconds, the control will beep once. This will block the controls from

sounding when a pad ispushed. To return the sound, push and hold START TIME pad again for 7seconds until 1beep isheard.

Note: The control will return to the audible mode after a power outage.

Tem perature Conversion (Fahrenheit / Celsius)

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed

for any temperature from 170°F to 550 °F (65°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1. Push BROIL pad. "- - -" appears in the display.

2. Push and hold the UP ARROW pad until "HI" appears in the display.

3. Push and hold BROIL pad until °F or °C appears in the display.

4. Push UP or DOWN ARROW pad to change °F to °C or °C to °F.

5. Push any function pad to return to normal operating mode.

Printed in United States 318200184 (0502)Rev.A

Setting the Clock and Minute Timer

mWooe

• • •Oven 0

o0e

• Door Locked

• - , Self-Cleaning Oven , - •

Note: The oven function will not work ifthe time of day clock is not set.

To Set the Clock

When the range isfirst plugged in,or when the power supply to the appliance has been interrupted, the display will flash "12:00".

1. Push CLOCK pad.

2. Within 5 seconds, push and hold the UP or DOWN ARROW pad until the correct time of day appears in the display.

Note: The clock cannot be changed during any timed bake or self-clean cycle.

To Set the Minute Timer

1. Push TIMER ON/OFF pad.

2. Push the UPARROW pad to increase the time in one minute increments. Push and hold the UP ARROW pad to increase

the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.

Note: If you push the DOWN ARROW pad first, the timer will advance to 11 hours and 59 minutes.

3. The display shows the timer count down in minutes until one minute remains. The display will count down in seconds.

4. Whenthesettimehasrun_ut_thetimerwi__beep3times__twi__c_ntinuet_beep3timesevery6_sec_ndsunti_theT_MER

ON/OFF pad is pushed.

Note: The min ute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time

has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with

any other mode, the minute timer will be shown in the display. To view other functions, push the function pad for that mode.

To Change the Minute Timer while it is in use:

While the timer is active and shows in the display, push and hold the UP or DOWN ARROW pad to increase or decrease the

time.

To Cancel the Minute Timer before the set time has run out:

Push TIMER ON/OFF pad,

Setting Oven Controls

06®

o0e

• DoorLocked s

• • • Self-Cleaning Oven • . •

Note: The oven function will not work if the time of day clock is not set.

To Set or Change the Temperature for Normal Baking

The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C).

Note: The oven control has a built-in safety feature that will shut off the

oven ifthe control is left on for more than 11 hours 59 minutes•

To Set the Controls for Normal Baking:

1. Push BAKE pad."- "appears in the display•

2. WithinSseconds,pushtheUPorDOWNARROWpad. Thedisplaywillshow"350°F(177°C)."ByholdingtheUPorDOWN

ARROW pad, the temperature can then be adjusted in 5°F (1°C) increments•

3. As soon as the UP or DOWN ARROW pad isreleased, the oven willbegin heating to the selected temperature• When the

oven temperature reaches the desired baking temperature, the control will beep 3 times and the Preheat light will turn off.

4. To cancel the baking function, push the CLEAR OFF pad.

To Change the Oven Temperature after Baking has started:

1. If you are using the minute timer, push the BAKE pad and make sure the bake temperature is displayed•

2. Push the UP or DOWN ARROW pad to increase or decrease the set temperature•

To Set Control for Continuous Bake or 12 Hour Energy Saving:

The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven ifthe control is left on for more than 11

hours and 59 minutes• The oven can be programmed to override this feature for continuous baking•

To set control for continuous baking:

1. Push TIMER ON/OFF pad, "0:00" will appear in the display.

2. Push and hold TIMER ON/OFF pad down for 5seconds until tone is heard, "---- hr" will appear in display for continuous

cooking. The current time of day will return to the display.

3. To cancel the Continuous Bake Function, push TIMER ON/OFF pad and hold for 5 seconds until tone is heard. "12hr" will

appear in display indicating that the control has returned to the 12 Hour Energy Saving feature.

To Set Control for Oven Lockout:

The control can be programmed to lock the oven door and inactivate the oven controls•

To Set Control for Oven Lockout feature:

1. Push the CLEAR OFF pad and hold for 3 seconds. "Loc" will appear in display, the "Door Locked" indicator light will flash

and the motor driven door lock will begin to close automatically. DO NOT open oven door while the indicator light isflashing.

Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will appear in the

display.

2. T_cance_the__ck_utfeature_pushcLEAR_FFpadandh__df_r3sec_nds_Thec_ntr__wi__un__ckthe_vend__randresume

normal operation.

Note: Ifany control pad is pressed while the Oven Door/Control Lockout mode, "Loc" will appear in the display until

the control pad is released.

Setting Oven Controls(continued)

• • oCven 0

@© o0e

• DoorLocked

• • • Self-Cleaning Oven • . •

To Broil

1. Arrange oven rack while oven is still cool.

2. Push the BROIL pad.

3. Push and hold the LIPor DOWN ARROW pad until the desired broil setting level appears in the display. Push LIPARROW

pad for HI broil or the DOWN ARROW pad for LO broil. Most foods can be boiled at the HI broil setting. Select the LO broil

setting to avoid excess browning or drying of foods that should be cooked to the well-done stage.

4. Place grid on the broiler pan, then place the food on the grid. DO NOT use the broiler pan without the grid or cover the grid

with aluminum foil. The exposed fat could ignite.

5. Electric models: Place the pan on the oven rack• Open the oven door to the broil stop position when broiling.

Gas models: Place the pan on the oven rack. Close the oven door

6. Broil on one side until food is browned; turn and cook on the second side. Note: Always pull the rack out to stop position

before turning or removing food.

7. When broiling is finished, push the CLEAR OFF pad.

Should an oven fire occur, close the oven door and turn off the oven. Ifthe fire continues, use a fire extinguisher.

DO NOT put water or flour on the fire. Flour may be explosive.

Setting Oven Controls(continued)

oee

• • O_ 0

o0e

• DoorLocked

• • • Self-Cleaning Oven • . •

To Set the Automatic Timer (Timed Bake Feature-If equipped)

The BAKE TIME and STARTTIME controls operate theTimed Bake Feature• The automatic timer will turnthe oven on and off

at the times you select in advance• The oven can be programmed to start immediately and shut off automatically or to begin

baking at a later time with an automatic shut off.

To Program the Oven to Begin Baking Immediately and To Shut Off Automatically:

1. Be sure that the clock shows the correct time of day.

2. Place the food in the oven.

3. Push the BAKE pad.

4. Within 5 seconds, push the UP or DOWN ARROW pad. The display will show"350°F (177°C)." By holding the UPor DOWN

ARROW pad, the temperature can then be adjusted in 5°F (1°C) increments.

5. Push the BAKE TIME pad. "0:00" will flash in the display.

6. Push the UP or DOWN ARROW pad until the desired amount of baking time appears in the display.

To Program Oven for a Delayed Start Time and to Shut-Off Automatically:

1. Be sure that the clock shows the correct time of day.

2. Place the food in the oven.

3. Push the BAKE pad.

4. Within 5 seconds, push the UP or DOWN ARROW pad. The display will show"350°F (177°C)." By holding the UPor DOWN

ARROW pad, the temperature can then be adjusted in 5°F (1°C) increments.

5. Push the BAKE TIME pad. "0:00" will flash in the display.

6. Push the UP or DOWN ARROW pad until the desired amount of baking time appears.

7. Push the START TIME pad.

8. Push the UP or DOWN ARROW pad until the desired start time appears in the display•

9. Once the controls are set, the control calculates when baking will stop.

Once the Controls are Set:

1. The oven will come on and begin heating to the selected baking temperature•

2. The oven temperature (or time of day) will show in the display•

When the Set Bake Time Runs Out:

1. "END" will appear in the display window and the oven will shut off automatically•

2. The control will beep 3 times every 60 seconds until the CLEAR OFF pad is pushed•

To Change the Oven Temperature or Bake Time after Baking has started:

1. Push the function pad you want to change.

2. Push the UP or DOWN ARROW pad to adjust the setting.

Use caution when using the automatic timer. Use the automatic timer when cooking cured or frozen meats and

most fruits and vegetables. Foods that can easily spoil such as milk, eggs, fish, meat or poultry, should be chilled in the

refrigerator first. Even when chilled, they should not stand in the oven for more than 1 hour before cooking begins, and should

be removed promptly when cooking is completed.

Oven Cleaning

. ehoto0e

• Door Locked

• • • Setf-CIeaningOven • • .

Note (some range models only): During the self-cleaning, the surface element, when used, are subjected to high heat.

To ensure maximum element life, a safe guard locks off the use of the surface elements during the self-clean cycle. Once

the oven cleaning cycle is completed and the oven door can be opened, the surface elements can be utilized.

To Start the Self-Clean Cycle

*We recommend a 2 hour self-clean cycle for light soils, and a 3 hour cycle for average to heavy soils (to assure satisfactory

results).

To Set the Controls for a Self-Clean Cycle:

1. Be sure the clock shows the correct time of day.

2. Push the CLEAN pad. "- - -" appears in the display.

3. Push the UP ARROW pad until "3:00" appears in the display for a 3 hour cycle, or push the DOWN ARROW pad until

"2:00" appears in the display for a 2 hour cycle.

4. As soon as the UP or DOWN ARROW pad is released, "CLn" appears in the display.

5. As soon as the controls are set, the motor driven lock will begin to close automatically and the "Door Locked" indicator

light will flash. DO NOT open the door while the light is flashing (it takes about 15 seconds for the lock to close).

6. The "Door Locked" light will glow until the cleaning cycle iscompleted or cancelled, and the oven temperature has cooled.

When the Self-Clean Cycle is Completed:

1. The time of day or "End" will appear in the display window and the "Clean" and "Doer Locked" light will continue toglow.

2. Once the oven has cooled down for about 1 hour and the "Door Locked" light has gone out, the oven door can be opened•

3. If"End"is indisplayandthe"Clean" indicator remains on, press CLEAR OFFpad.Thetimeofdaywillappearinthedisplay.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire:

1. Push the CLEAR OFF pad.

2. Once the oven has cooled down for about 1 hour and the "Door Locked" light has gone out, the oven door can be opened•

3. Correct the condition which caused the smoking•

4. Restart the self-clean cycle once all conditions have been corrected•

_Use when the door after Stand tothe side of the when the

care

openi ng

oven

self-cleaning cycle.

oven

open ing

door to allow hot air or steam to escape.

_P'_"_ DO NOT force the door This the automatic door Use caution when

oven

open.

can

damage locking system•

opening the door after the self-cleaning cycle is completed• The oven may still be VERY HOT.

Recalibrating Your Oven Temperature

The temperature in the oven has been set at the factory. When first using the oven, be sure to follow recipe times and

temperatures. Ifyou think the oven is too hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test

a recipe by using a temperature setting that ishigher or lower than recommended temperature. The baking results should help

you to decide how much of an adjustment is needed.

To Adjust Oven Temperature:

1. Push the BAKE pad.

2. Set the temperature to 550°F (287°C) by pushing and holding the UPARROW pad.

3. Within 2 seconds, push and hold the BAKE pad until the special 2digit display appears. Release the BAKE pad. The display

now indicates the amount of degrees offset between the original factorytemperature setting and the current temperature

setting. If the oven control has the original factory calibration, the display will read "00."

4. Thetemperature can nowbeadjusted up or down 35°F(17°C), in 5°F(1°C) steps by pushing and holdingthe UP or DOWN

AR ROW pad. Adjust until the desired amount ofdegrees offset appears in thedisplay. When lowering the oven temperature,

a minus sign (-) will appear before the number to indicate that the oven will be cooler by the displayed amount of degrees.

5. When you have made the desired adjustment, push the CLEAR OFF pad to go back to the time of day display.

Note: The adjustment made will not change the self-cleaning temperature.

Failure Modes

All failure modes give a visual and audible alarm. When display shows F1 (internal fault), F3 (oven sensor circuit fault) or F9

(motor door lock fault), the electronic oven control has detected a fault condition. Note that code and push the CLEAR OFF

pad to clean the display and stop the beeping. Reprogram the oven. If fault recurs, push CLEAR OFF pad, disconnect the

appliance to prevent damage and contact an authorized servicer.

Frigidaire FEB24S5ABF Owner's manual

Brand: Frigidaire

Model: FEB24S5ABF

Type: Owner's manual

This manual is also suitable for

Download PDF

report

Frigidaire FEB24S5ABF Owner's manual

This manual is also suitable for

Frigidaire FEB24S5ABF Owner's manual

Related papers

Other documents