United IT-8566 Operating instructions

Type
Operating instructions
ELECTRICAL INSECT KILLER IT-8566
Insects such as mosquitoes, flies and various other bugs, etc are attracted by UV Light. This unit operates with a maximum
efficiency, the UV lamp attracts and the powerful fan driven suction system pulls the flying insects to the electric grid which
could kill them by high voltage electric shock.
1. 2-in-1 operation combining the use of a strong fan along with a UV lamp and a high tension grid
3. Low Consumption, safe, and effective.
4. Easy to operate and clean.
5. Environmentally friendly with no chemicals.
Ideal for Home and Commercial use.
1. Before use, ensure that the power plug is connected to a properly installed wall socket that is easily accessible and the
supply voltage matches the rating plate.
2. Ensure the power socket used is properly earthed.
3. In order to get the best results, ensure that this product is placed appropriately so that it will have maximum impact
against the insects.
4. Once the power supply is switched "On" you should see the tube emitting purple light. This indicates that the product is in
operation. At the same time the fan operation shall commence.
5. It is normal to hear a cracking or zapping sound when insects touch the electrified net.
6. After a period of use, the bottom tray may need cleaning. Firstly, please cut off the power and remove the plug from the
socket. Twist and turn the bottom half of the unit to the unlock position, and take the base apart so as to clean it from the
insect residues. Keep in mind that once disconnecting the base from the rest of the unit a protective micro-switch blocks the
units operation. Once cleaned please follow the reverse procedure and lock the base unit back.
1. Ensure that the voltage and the frequency indicated on the rating label matches the mains voltage before plugging in the
appliance.
2. Do not operate the appliance if it or the power cord show visible signs of damage.
3. Ensure that the power cord cannot be damaged by sharp edges or hot surfaces. If the power supply cord is damaged, it
must be replaced by a qualified electrician.
4. Before replacing the lamp or cleaning the product, ensure that the power supply is switched off and the plug is removed
from the socket. Also, please make sure that the electric grid is fully discharged before touching any parts of the unit.
5. The appliance should be kept out of the reach of children or pets. Children should be supervised at all times to ensure
they do not play with or in any other way try to operate or come into contact with this appliance.
6. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they are supervised or have been given instruction concerning use of the appliance by a
person responsible for their safety.
7. Do not insert your fingers or other objects into the device to prevent accidents.
8. Protect the appliance from moisture, dripping water and splashing. Do not use the appliance in bathroom or in the
immediate surroundings of showers, bath-tubs or swimming pools. Do not use the product if it is wet or with traces of
Features:
Application:
How to use:
Warnings and notices:
moisture.
9. Always make sure that there is enough space around the unit for air circulation. Do not cover the units as this could
create danger of overheating.
10. Keep the unit far from the direct sunshine, avoid high temperatures, humidity and places with dust and corrosive gas.
11. To avoid any risk, do not make any modifications to the product. In case of failure or malfunction, turn it off and do not
tamper. For any repair, contact an authorized service center.
12. Not suitable for outdoor use, for indoor use only.
13. The appliance is not intended to be used in locations where flammable vapors or explosive dust is likely to exist. Do not
expose it to extremely dirty environments.
14. DO NOT TOUCH THE NET, THERE IS THE RISK OF ELECTRIC SHOCK.
Recycling Notice
Your product is designed and manufactured with high quality materials and components which can be recycled
and reused.
This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately
from your household waste.
Please dispose of this equipment at your local community waste collection/recycling centre. In the European Union there
are separate collection systems for used electrical and electronic products.
Please help us to conserve the environment we live in!
DECLARATION OF CONFORMITY
Herewith, Amiridis-Savvidis S.A. states that this product, complies with the requirements of below directives:
EMC-Directive: 14 / 30 / EU
Low Voltage Directive: 14/ 35 / EU
CE Marking: 93 / 68 / EEC
RoHS Directive: 11 / 65 / EU
The detailed declaration of conformity can be found at www.united-electronics.gr
Exclusive importer in Greece:
Amiridis – Savvidis S.A.
87A, 17th Noemvriou str, P.C. 55534
Thessaloniki – Greece
T: +302310944944 | F: +302310944940
www.amiridis-savvidis.gr
  • Page 1 1
  • Page 2 2

United IT-8566 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI