Walmart E6 User manual

Brand: Walmart

Model: E6

Type: User manual

Walmart E6 is a smart magnetic wireless charger that offers a convenient and efficient way to power up your compatible devices. Utilizing magnetic alignment and electromagnetic induction, it delivers a charging experience with various power outputs ranging from 5W to 15W, automatically adapting to your device's requirements. The charger features a compact and sleek design, making it ideal for use at home, in the office, or on the go. Experience the ease and versatility of wireless charging with the Walmart E6.

Product List

Thank you for choosing us

Smart magnetic wireless charger

Thank you for choosing our digital products.This product

is a smart magnetic wireless charger that allows you to

easily experience the fun of magnetic alignment wireless

charging. Please read the instruction carefully before

using this product and save it for future use.

Magnetic Charger *1

User Manual *1

Product parameter

Input voltage:(compatible with QC/AFC/PD protocol)

5V/2A-9V/2.22A

Output power:(automatic mobile phone adaptation):

5W-7.5W-10W-15W

Output current:1A-1.67A

Output voltage:5-9V

7.5W maximum efficiency:76%

Charging distance:5mm

Charging method:

Magnetic alignment, electromagnetic induction

Working frequency:110-205KHZ

Precautions

1. Please use a qualified PD protocol or QC protocol

power charger, otherwise it may cause unstable

charging or abnormal flicker;

2. If you need to use a protective case for your iPhone12/

13/14 during the charging, please use one with Magsafe;

3. Do not use a mobile phone protective shell with metal

back or a mobile phone protective shell with a thickness

greater than 4mm;

4. The receiving coil of a mobile phone that supports

wireless charging is generally located at the center of the

mobile phone.Please place the center of the mobile

phone at the center of the charging board to get a better

charging experience;

5. Do not put metal debris or magnetic cards on the

charging board, which may cause metalhair, magnetic

card damage, charger damage or other abnormalities;

6. If the receiving coil or the transmitting board is

overheated and the charging stops during the use, please

remove the charging device, After waiting to cool down,

and try charging again.

Safety notice

1. Do not pull the power cord violently to avoid the power

cord from breaking or falling off.

2. Do not disassemble CW120 by yourself or throw it into

Dre or water to avoid short circuit and electric leakage.

3. Do not use CW120 in severe high temperature,

humidity or corrosive environment to avoid electric

leakage caused by circuit damage.

Thank you for purchasing our CW120 wireless charger.

In order to ensure you get reliable after-sales service,

please read the following warranty instructions carefully.

Warranty scope

This product fails to work normally or malfunctions during

normal use, and once our company confirmed,then can

enjoy the company’s after-sales service commitment.

FCC STATEMENT :

This device complies with Part

15 of the FCC Rules. Operation i

s subject

to the following

two conditions:

(1) This device may not cause

harmful interference, and

(2) This device must accept any i

nterference received, includin

interference that may

cause undesired operation.

Warning:

Changes or modifications not exp

ressly approved by the party

responsible for

compliance could void the user's

authority to operate the

equipment.

NOTE: This equipment has been te

sted and found to comply with the limits

for a Class B

digital device, pursuant to Par

t 15 of the FCC Rules. These

limits are designed to provide

reasonable protection

against harmful

interference in a residen tial installation. This

equipment generates use

s and

can radiate r adio frequency energy

and, if not installed

and used in

accordance with the instructions, may cause harmful

interference to radio

communications. However, there is

no guarantee that interference will not

occur in a

particular installation. If this equipment does

cause harmful

interference to radio or

television reception, which c

an be determined by

by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or

more of the following

measures:

Reorient or relocate the receiving an

tenna.

Increase the separation bet

ween the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the

receiver is connected.

Consult the dealer or an experi enced radio/TV technician for h elp.

FCC Radiation Exposure Statement:

This device complies with FCC RF radiation exposure limits set forth for an

uncontrolled environment. This transmitter must not be co-located or

operating in conjunction with any other antenna or transmitter. During the

operation of device a distance of 15 cm surrounding the device and 20 cm

above the top surface of thedevicemust be respected.

Walmart E6 User manual

Walmart E6 User manual

Other documents