Chargers M6 User guide

Brand: Chargers

Model: M6

Type: User guide

Magnetic wireless

charger

Product Packing List:

Thank you for purchasing our company's digital

products. This product is a car-mounted intelligent

magnetic wireless charger, which allows you to easily

experience the fun of magnetic alignment wireless

charging. Before using this product, please read the

instruction manual carefully and keep it properly for

future use.

Accessories included with this product :

Magnetic wireless charger host x1

Air outlet clip x1

Instruction Manual x1

Type-C charging cable x1

Product Specifications:

Name Magnetic wireless charger

Model M6

Maximum Power Support: 5W/7.5W/10W/15W

Input Voltage 9V/2A,5V/2A

Input Port Type-C

Charging Protocol Compatible with QC/AFC/PD Protocol

Charging Efficiency Maximum Efficacy:80%

Product Size 15*9.5*6cm

1 Tempered glass panel

2 ABS Plastic

Net Weight 180g

3 Type-C Input Port

4 Air outlet ball

5 Lock nu

6 Bottom shell

Installation Method:

LED Indicator Status Description

1.Connected to power supply : blue/green LED flashes

alternately

2.Standby : Green LED steady on

3.Fast charging : Blue LED breathing

4.Slow charging : Green LED blinks

5. Fully charged : Blue LED steady on

6.Charging exception alert: Blue/green LED flashing

alternately

Notes

1. Please use a qualified PD protocol or QC protocol

power charger, otherwise it may cause unstable charging

or abnormal flashing;

2. Use iPhone12/iPhone13/iPhone14 series mobile

phones, if you need to use a protective case, please use

a mobile phone case with Mag safe function;

3. Do not use a mobile phone protective case with a metal

back or a mobile phone protective case with a thickness

greater than 4mm;

4. The receiving coil of the mobile phone that supports

wireless charging is generally located at the center of the

mobile phone. Please place the center of the mobile phone

in the center of the charging board to obtain better

charging experience;

5. Do not put metal debris or magnetic cards on the

charging board, which may cause metal heating, damage

to the magnetic card, damage to charging or other

abnormalities;

6. If the receiving coil or the transmitting board is

overheated during use and stops charging, please remove

the charging device, wait for it to cool, and try charging

again.

Safety Instruction :

1. Do not pull the power cord forcibly to prevent the power

cord from breaking or falling off.

2. Do not disassemble the M6 or throw it into fire or water

to avoid short circuit and electric leakage. Do not use the

M6 in severe high temperature, humid or corrosive

environments to avoid damage to the circuit and leakage.

Warranty Service Scope :

Thank you for purchasing our company's M6 car wireless

charger. In order to ensure that you receive a reliable

after-sales service, please verify and read the warranty

description.

Warranty scope: This product fails to work normally or fails

during normal use, and it can enjoy the company's

after-sales service commitment after being identified by

our company.

Paid Service Scope :

1. Accessories are not guaranteed.

2. Failure due to improper user operation.

3. Failures caused by accidental disasters, man-made

damage, self-disassembly, removal of seals and repairs

by non-authorized maintenance centers of the company.

Note: Damage to the mobile device caused by improper

operation by the user may even bring danger.

The product is out of warranty:

The customer still enjoys the maintenance service, but

must pay the maintenance cost and material cost.

1: Insert the ball head of the air outlet into 4 and insert the

other end into the grille of the car air outlet, and tighten it 5 .

2: Insert the wireless charging product into 6 , adjust the

angle of the product and tighten it;

3: Insert the Type-C head of the cable into the product;

4: Place the mobile phone on the product after

magnetically aligning it, and the mobile phone will prompt

to start charging;

Components Name :

Thanks for using .

FCC STATEMENT :

This device complies with Part

15 of the FCC Rules. Operation i

s subject

to the following

two conditions:

(1) This device may not cause

harmful interference, and

(2) This device must accept any i

nterference received, includin

interference that may

cause undesired operation.

Warning:

Changes or modifications not exp

ressly approved by the party

responsible for

compliance could void the user's

authority to operate the

equipment.

NOTE: This equipment has been te

sted and found to comply with the limits

for a Class B

digital device, pursuant to Par

t 15 of the FCC Rules. These

limits are designed to provide

reasonable protection

against harmful

interference in a residen tial installation. This

equipment generates use

s and

can radiate r adio frequency energy

and, if not installed

and used in

accordance with the instructions, may cause harmful

interference to radio

communications. However, there is

no guarantee that interference will not

occur in a

particular installation. If this equipment does

cause harmful

interference to radio or

television reception, which c

an be determined by

by turning the equipment off and on, theuser is encouraged to try to correct

the interference by one or

more of the following

measures:

Reorient or relocate the receiving an

tenna.

Increase the separation bet

ween the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the

receiver is connected.

Consult the dealer or an experi enced radio/TV technician for h elp.

FCC Radiation Exposure Statement:

This device complies with FCC RF radiation exposure limits set forth for an

uncontrolled environment. This transmitter must not be co-located or

operating in conjunction with any other antenna or transmitter. During the

operation of device a distance of 15 cm surrounding the device and 20 cm

above the top surface of the device must be respected.

Chargers M6 User guide

Brand: Chargers

Model: M6

Type: User guide

Download PDF

report

Chargers M6 User guide

Chargers M6 User guide

Related papers

Other documents