2. Rugged Ridge
  3. 12104.51

Rugged Ridge 12104.51 Installation guide

  • Hello! I'm your chat assistant. I've reviewed the user manual for the Rugged Ridge Soft Top Storage Boot JK 07-Current. The document provides step-by-step instructions on how to install and secure the storage boot. This includes wrapping the boot around the soft top, attaching it using side retainers, fastening the straps to the roll bar, and ensuring everything is secure. I'm ready to answer your questions about the product and its installation.
  • What should I refer to for proper soft top lowering procedures?
    How to install the soft top boot?
    What is the last step to ensure the boot is correctly installed?
Note: Please refer to your factory owners manual for proper soft top lowering procedures.
12104.51
SOFT TOP STORAGE BOOT JK 07-CURRENT
Rev 01/10
SB
3. Fasten the straps around the roll bar and tighten. 4. Check all areas to insure the soft top boot is secure.
1. Open the soft top boot and wrap it around the top 2. Pull the sides of the boot tight and insert the lip into
Zip the center section of the boot around the top. side retainers on both sides of the jeep.
Page 1 of 1
/