Rugged Ridge 12104.51 Installation guide

Type
Installation guide
Note: Please refer to your factory owners manual for proper soft top lowering procedures.
12104.51
SOFT TOP STORAGE BOOT JK 07-CURRENT
Rev 01/10
SB
3. Fasten the straps around the roll bar and tighten. 4. Check all areas to insure the soft top boot is secure.
1. Open the soft top boot and wrap it around the top 2. Pull the sides of the boot tight and insert the lip into
Zip the center section of the boot around the top. side retainers on both sides of the jeep.
Page 1 of 1
  • Page 1 1

Rugged Ridge 12104.51 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI