Please keep and read this instruction manual before installation, we also
prepared an instruction video to help on Amazon Page. If you need further
assistance, please contact Customer Service by email:
Installation instructions
Installation Overview
Package List
Prepare the door and check dimensions
2
Install the latch and strike
4
Confirm the direction of the door
8
Install the interior assembly
14
Install the keypad
14
ProgrammingInstructions
17
18
20
31
Low Power/Emergency Power
32
33
33
34
35
36
2-1/8"
54mm
Measure to confirm that the backset is either 2-3/8"
or 2-3/4"(60 or 70mm).
Measure to confirm that the hole in the door is 2-
1/8"(54mm).
Measure to confirm that the hole in the door edge
is 1"(25mm).
Measure to confirm that the door is 1-3/5" to
2"(40mm to 50mm) thick.
C
Measure to confirm that the hole in door frame is
drilled a minimum of 1" (25mm) deep.
D
1"
25mm
with the face of
the latch
No, adjustment is
required. Proceed to
the next step.
Rotate and pull the
latch as shown
to extend the latch.
When the door is pushed inwards, the latch
tongue is installed outwards.
Install the strike on the door frame.
IMPORTANT:
Make sure the hole in door frame
is drilled a minimum of 1" (25mm) deep.
keypad handle setting
Once the square pole is fully pressed in with the connecting
pedestal, the front handle can no longer rotate
Interior assembly handle setting
Remove the mounting plate
Please keep press the Button of the Spindle. Then, insert the
spindle into the Knob. (The spindle bump should be aligned
with the hole of the knob) Make sure that the Button is
locked into the hole of Knob.
The connected spindle pushes the knob into the
groove so that the knob is flush with the groove.
Remove the rear handle.
Fix the front handle
with screws.
Fix the front handle
with screws.
Groove
Grab the square pole and pill it outward
Press the lock cover as shown so that the other end is
tilted up to remove the lock cover, and then insert the
key to unlock the lock.
16 17
in
The property
can
After entering a failed code 5 times, the unit will shut down for
5 minutes.
The user can prevent the exposure of the PIN code to strangers
by entering random digits before or after the correct PIN code.
IMPORTANT: Do not load batteries until the lock is completely
installed.
18 19
Turn on the Bluetooth and enter the interface of adding
lock in app.
After the administrator successfully
adds the lock, owner owns the highest
administrative rights to the lock. The
owner can send keys to the others.
Meanwhile, the owner can increase
the key management that is about to
expire.
in
in
has
One-time passcode can only be used
for one time, and is available for 6
hours. It will automatically expire.
and
The manager can delete an ekey, reset an ekey, and adjust the
ekey. He can also check the lock record.
22 23
All generated passcodes can be viewed and managed in the
password management module. This includes the right to
change password, clear password, reset password and
unlock password.
The system adds new ways of
communication, such as Facebook
Messenger and WhatsApp, with the
aim of helping users to share the
access code.
24 25
Then, when the RFID card is close to the card
sensing area of the lock for 2-3 seconds, the RFID card can be
added successfully.
26 27
It records who comes and goes. When it comes to 24/7 access
logs, get all logs about door unlock/lock anytime anywhere.
place
28 29
The smart lock connects directly via bluetooth, so it is not
attacked by the network. The gateway is a bridge between
smart locks and home Wi-Fi networks. Through the
gateway, user can remotely view and calibrate the lock
clock, read the unlock record, meanwhile, can remotely
delete and modify the password.
Gateways must be added through the app before they can
be used.
The apartment transfer account received must be the account of the administrator.
30 31
Disabled
5 times
5 times
Enabled
32 33
Its operation
The lock cannot be unlocked with the keypad.
Despite several attempts to unlock the door, it could not be opened.
34 35
TEL: +1 833 637 2188
As an innovative and high high-tech, GEONFINO is dedicated
to R&D, designing, producing and marketing of Smart lock
products. Our top-guns in the Smart lock field have constantly
developed a series of products with features like fashion, human
care, energy efficiency, and environment protection. And we
highly value concepts of "People Oriented, Practical and
Innovative." a professional seller in the smart lock field will
always be a nice company to your life!
36 37
/
