Fishbone Offroad Ultimate Windshield Light Pod Combo Installation guide

FB21015

Jeep® JK Wrangler

Windshield Light Bracket

2101500

REQUIRED TOOLS

T-40 wrench

KIT CONTAINS

Gaskets (Left and Right)

Brackets (Left and Right)

QTY

1 ea

1) REMOVE FACTORY BOLTS

Using your T-40 wrench, remove the two (2) OEM

bolts on the front of the windshield hinge bracket.

Remove these from both sides.

2) INSTALL YOUR LIGHT BRACKETS

Place the gasket between the bracket and your

OEM windshield bracket. Reinsert the OEM

hardware to secure the light bracket to your

vehicle. Repeat this for the opposite side.

3) LIGHTING

Follow your light’s install instructions for mounting

and wiring.

* LIGHTS NOT INCLUDED

This manual is also suitable for

Download PDF