2. Fishbone Offroad
  3. FB21015

Fishbone Offroad FB21015, Ultimate Windshield Light Pod Combo Installation guide

  • Hello! I've reviewed the installation instructions for the FISHBONE OFFROAD Windshield Light Bracket JK Wrangler. This document outlines how to install the light brackets on your Jeep, including removing the factory bolts, attaching the gaskets, and securing the new brackets. I'm ready to assist you with any questions you might have about the installation process or the product itself.
  • What tool is needed for installation?
    What is included in the kit?
    Where are the OEM bolts located?
FB21015
Jeep® JK Wrangler
Windshield Light Bracket
2101500
REQUIRED TOOLS
T-40 wrench
KIT CONTAINS
Gaskets (Left and Right)
Brackets (Left and Right)
QTY
1 ea
1 ea
1) REMOVE FACTORY BOLTS
Using your T-40 wrench, remove the two (2) OEM
bolts on the front of the windshield hinge bracket.
Remove these from both sides.
2) INSTALL YOUR LIGHT BRACKETS
Place the gasket between the bracket and your
OEM windshield bracket. Reinsert the OEM
hardware to secure the light bracket to your
vehicle. Repeat this for the opposite side.
3) LIGHTING
Follow your light’s install instructions for mounting
and wiring.
* LIGHTS NOT INCLUDED
/