For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com. PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
highwood
NATURE'S CLOSEST RIVAL
Deck Storage Box
Assembly Guide
1) Place Front Panel on Flat Surface
With Inside of Panel Facing Up. Insert
the Dowels in the Side Panels into the
Holes on the Front Panel and Fasten
with (4) "A" Bolts Thru Holes in Legs.
Repeat for the Back Panel.
AD-DBXL1
07.23.18
A
2) With the Box on it's Side, Insert
the Floor Panel into the Box and
Fasten with (8) "B" Bolts
3) Tighten all Bolts.
x8
#1/4-20 x 2"
B
#1/4-20 x 1-3/4"
x8
SIDE PANEL
FRONT PANEL
BACK PANEL
SIDE PANEL
FLOOR PANEL
B
A
C
No.14 x 1" WOOD SCREW
x6
#3 PHILLIPS BIT
A
A
A
DETAIL 5
5
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com. PAGE 2 OF 2
highwood
NATURE'S CLOSEST RIVAL
4) Align hinge pilot holes on Lid
Assembly to Holes in Hinges.
5) Attach Lid to Hinges Using (6) "C"
Screws with the Included #3 Phillips
Head Driver Bit.
Hinge Pilot Hole
LID ASSEMBLY
(2) "C" Screws in Each Hinge
AD-DBXL1
07.23.18
/