Malco GOT Operating instructions

Brand
Malco
Model
GOT
Type
Operating instructions

This manual is also suitable for

1. Remove blade assembly mounting bolt to
disconnect blade assembly from drive rod.
(Avoid damaging blades).
2. Pull drive rod out of tool through top.
3. Remove release chocks and drive chock,
(the springs will be loose). Replace drive
chocks and release chock while holding
the springs in position.
4. Insert drive rod through top slot and work
it through the chocks and springs and
through bottom slot.
5. Connect blade assembly to drive rod.
GOT
CHOCK REPLACEMENT INSTRUCTIONS
Top Slot
Release
Chock
Drive Rod
Springs
Drive
Chocks
Bottom
Slot
Blade
Assembly
Mounting
Bolt
Malco Products, SBC | Annandale, Minnesota, U.S.A. | www.malcotools.com | ©2019
U.S. 320-274-7387 - 800-328-3530 | Canada: 320-274-2376 - 800-219-1085 |
International: 01-320-274-2376
SL10684C
  • Page 1 1

Malco GOT Operating instructions

Brand
Malco
Model
GOT
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents