3com Business Operating instructions

3com
Brand
3com
Model
Business
Type
Operating instructions
3COM Business Phone Instructions
Making a call
1.
For an internal call, press the four digit extension of the person you wish to call.
2.
For an external call, press the “9” button and then phone number.
Answering a call
1.
Pickup the handset
when the phone ring
s.
2.
ress the “Speaker” button
when the phone rings
.
Redialing a call
1.
Press the “Redial” button after picking up the handset or pressing the “Speaker”
button.
2.
You can also use the display to check your call log to redial those numbers.
Answering a second
call
1.
Press “Hold” to save current call.
2.
Press the blinking
access button on which the new call is flashing.
Placing a call on hold
1.
Press the “Hold” button to place the call on hold. One of the access button lights
will begin to blink indicating the call
is on hold.
2.
To return to the call, press the access button next to the blinking light.
Transferring a
call
1.
Press the “Transfer” button
2.
Dial the extension where the call is to be sent.
3.
Press “Transfer” again to complete the transfer.
(
Important!
-
with the
older internal phone systems
if you do not wait to hear the
other person pick up
or voicemail
before hitting “Transfer” button,
the call will be
disconnect
ed
.)
To cancel a transfer press
the
“
Release
”
button
. The call will be
returned as
a
flashing parke
d line, press it to pick it up.
Call Forwarding
1.
To forward your calls, press the “Forward” access button and enter the
destination extension. The button status light will turn on and the display will
show “Call Forward.”
2.
To undo the forward, press the “F
orward” access button again. The button status
light will turn off and the display will return to normal.
Conference calls
1.
Make sure the first person in the conference call has called into your phone. You
will be considered the second person in this cal
l.
2.
Press the “Conference” button which places the first person on hold.
3.
Dial the third person and then when they answer, press the “Conference” button
again.
4.
During the call, you can place your line on hold by pressing the “Hold” button.
This will allow t
he other two people to talk but not hear you.
5.
At the end of the conversation, hang up to end the call.
Checking Voice Mail
1.
Press the purple voice mail button.
2.
Enter your phone password.
3.
Listen to the menu options to retrieve your messages.
To forward all
incoming calls to your voice mail
1.
Press the “Forward Mail” button so that the status light next to it turns on. All
calls coming into the number will now go straight to voice mail.
2.
To turn off mail forwarding, press the “Forward Mail” button so the statu
s light
turns off.
Using the
internal phone directory
1.
Press the
“Directory”
access button
.
2.
The phone display will show “1702 KIR” and alternate with “Select, Sort, Exit”
options on the soft buttons. This means you are now accessing the directory.
3.
To lo
ok up a person by last name,
press the phone button number/letter
combinations to spell out letters the person’s name. This would be very similar to
spelling out words as you would if you were texting someone with your cell
phone. For example, to look up
“Smith”, press the “7” button four times to get
“S”, press the “6” button one time to get “M”, press the “4” button three times to
get “I”, press the “8” button to get “T” and press the “4” button two times to get
“H”.
4.
At any time while spelling a name, y
ou can just enter the first few letters and then
use the up and down scroll buttons to go up and down the directory listing.
5.
Once you locate a person’s name, press the left soft button under the display
or
the “OK” access button
to dial the extension.
Set
ting personal speed dial #’s
1.
Press the “Menu” button to access
the
menu options.
2.
User the scroll buttons to view the menu options.
3.
Press 3 on the number pad to access the personal speed dials
.
4.
Use the scroll button to move up and down thru the available sp
eed dial
positions
.
5.
Press # then the number or extension for the speed dial. Remember to enter a 9
before the number for outside calls. The center soft key is the backspace.
6.
When done press the
“
OK
”
button to accept.
Accessing Call History
1.
Press the “Menu
” button to access the menu options.
2.
User the scroll buttons to view the menu options.
3.
Press 2 for call history.
3COM 310
2
Business Phone
Display
Soft Buttons
Scroll Buttons
Access Buttons
Hands Free
Button
Voice Mail
Button
Forward Mail
Button
Speaker
/ Redial / Conference / Transfer / Hold
Buttons
Me
nu
Button
  • Page 1 1
  • Page 2 2
  • Page 3 3

3com Business Operating instructions

3com
Brand
3com
Model
Business
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents