Telex 2.50 - 2.70 GHz BRS/MMDS/WiMAX Sector Antennas Owner's manual

Category
Network antennas
Type
Owner's manual
2.50 - 2.70 GHz BRS/MMDS/WiMAX Sector Antennas
FEATURES
*
Standard Mounting Kit includes:
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Model Frequency Polarization Gain Beamwidth, -3 dB X-Pol. F/B Ratio Max. VSWR
Number GHz dBi Az El Rejection, dB dB (R.L., dB)
Electrical Specifications
Mechanical Specifications
Model Width Depth Height Weight Wind Survival Connector Mech. Tilt Mast Diameter
Number in. (cm) in. (cm) in. (cm) lbs. (kg) mph (kmph) Type degrees Range, in.(cm)
26XXX-YYV-N 5 (12.7) 4 (10.2) 35.25(89.5) 6 (2.7) 144 (232) N-jack 0 - 10 1-4 (2.5-10.2)
Hot-dipped galvanized parts for long life
Stainless Steel hardware
Continuously adjustable mechanical downtilt to 10 deg.
Weatherproof downtilt label with 1 degree markings
Brackets fit mast sizes from 1" to 4"
Brackets securely hold antenna in up to 144 mph winds
Easy Installation
Lightweight and rugged design
Low windload
Offset RF connector for easy installs on large masts
Meets ETSI Specification EN 301 525 v1.1.1 (CS)
50 watt maximum power input
DC grounded for lightning protection
Pattern null-fill
UV-stable radome
http://www.telex.com/wireless
Telex Communications, Inc. 12000 Portland Ave. S. Burnsville, MN 55337 USA
26060-17V-N 2.5 - 2.7 Vertical 17.0 60 7 >25 boresight >25 1.8 (10.9)
26090-16V-N 2.5 - 2.7 Vertical 16.0 90 7 >25 boresight >25 1.8 (10.9)
26120-14V-N 2.5 - 2.7 Vertical 14.0 120 7 >25 boresight >25 1.8 (10.9)
26060-17V-N Azimuth Pattern 26060-17V-N Elevation Pattern
26090-16V-N Azimuth Pattern 26090-16V-N Elevation Pattern
26120-14V-N Azimuth Pattern 26120-14V-N Elevation Pattern
2.50 - 2.70 GHz BRS/MMDS/WiMAX Sector Antennas
http://www.telex.com/wireless
Telex Communications, Inc. 12000 Portland Ave. S. Burnsville, MN 55337 USA
  • Page 1 1
  • Page 2 2

Telex 2.50 - 2.70 GHz BRS/MMDS/WiMAX Sector Antennas Owner's manual

Category
Network antennas
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI