Acrosser Technology AR-B5630 User manual

AR-B5630

Socket P Intel® Core™2 Duo EPIC SBC

with Intel® GME965 Express Chipset

, DVI/LCD, Dual LAN and PCI-104

Eexpansion

User Guide

Edition: 1.1

Book Number: AR-B5630 09.03.18

2

Table of Contents

0. PREFACE.....................................................................................................................................................................4

0.1 COPYRIGHT NOTICE AND DISCLAIMER.....................................................................................................................................4

0.2 WELCOME TO THE AR-B5630 CPU BOARD................................................................................................................................4

0.3 BEFORE YOU USE THIS GUIDE...................................................................................................................................................4

0.4 RETURNING YOUR BOARD FOR SERVICE.................................................................................................................................4

0.5 TECHNICAL SUPPORT AND USER COMMENTS........................................................................................................................4

0.6 STATIC ELECTRICITY PRECAUTIONS ........................................................................................................................................5

1. INTRODUCTION..........................................................................................................................................................6

1.1 PACKING LIST................................................................................................................................................................................6

1.2 SPECIFICATIONS...........................................................................................................................................................................7

1.3 BLOCK DIAGRAM...........................................................................................................................................................................9

2. INSTALLATION..........................................................................................................................................................10

2.1 AR-B5630'S BOARD DIMENSIONS .............................................................................................................................................10

3. CONNECTION ...........................................................................................................................................................11

3.1 AT POWER INPUT (PWR2)..........................................................................................................................................................13

3.2 ATX FUNCTION CONNECTOR (CON2) ......................................................................................................................................13

3.3 SATA POWER (CON3).................................................................................................................................................................13

3.4 SERIRQ CONNECTOR (JP2).......................................................................................................................................................13

3.5 CPU FAN (FAN1)..........................................................................................................................................................................14

3.6 PCI104 (J10) .................................................................................................................................................................................14

3.7 SATA CONNECTOR (SATA1)......................................................................................................................................................14

3.8 PATA CONNECTOR (IDE1)..........................................................................................................................................................15

3.9 KEYBOARD LOCK (J11)...............................................................................................................................................................15

3.10 CFMASTER SELECT (JP4)........................................................................................................................................................15

3.11 BATTERY CONNECTOR (BAT1) ...............................................................................................................................................16

3.12 COMS CLAER CONNECTOR(J5) ..............................................................................................................................................16

3.13 EYBOARD/MOUSE CONNECTOR (KM1)..................................................................................................................................16

3.14 INTERNAL USB CONNECTOR (USB2) .....................................................................................................................................16

3.15 EXTERNAL USB (USB1) ............................................................................................................................................................16

3.16 RJ45 CONNECTOR (LAN2)........................................................................................................................................................17

3.17 RJ45 CONNECTOR (LAN1)........................................................................................................................................................17

3.18 DB-15 VGA CONNECTOR (VGA1).............................................................................................................................................17

3.19 DVI-I CONNECTOR (DVI1).........................................................................................................................................................18

3.20 TV-OUT (TVCON1).....................................................................................................................................................................18

3.21 COM2 (COM1) ............................................................................................................................................................................19

3.22 COM1 (CON1).............................................................................................................................................................................19

3.23 COM3 (COM2) ............................................................................................................................................................................19

3.24 COM4 (COM3) ............................................................................................................................................................................20

3.25 SYSTEM FAN (FAN2).................................................................................................................................................................20

3.26 AUDIO CONNECTOR (AUDIO1)................................................................................................................................................20

3.27 PANEL POWER SELECTOR (J1)...............................................................................................................................................21

3.28 GPIO (GPIO1).............................................................................................................................................................................21

3.29 RS232/422/485 SWITCH (JP1)...................................................................................................................................................21

3.30 RS422/RS485 CONNECTOR (J9)..............................................................................................................................................22

3.31 PANEL POWER SELECTOR (J1)...............................................................................................................................................22

3.32 LVDS POWER (LCDPW1)..........................................................................................................................................................22

3.33 LVDS CONNECTOR (LCD1) ......................................................................................................................................................23

3.34 DDR2 SO-DIMM (DDR1).............................................................................................................................................................23

3.35 CF SOCKET (CN3) .....................................................................................................................................................................23

4. WATCHDOG TIMER CONFIGURATION...................................................................................................................24

4.1 WATCHDOG TIMER SETTING ....................................................................................................................................................24

5. BIOS CONSOLE ........................................................................................................................................................26

5.1 MAIN SETUP.................................................................................................................................................................................26

The field determines whether or not the system will halt if an error is detected during the power up...................... 27

5.2 ADVANCED CHIPSET SETUP.....................................................................................................................................................27

When enabled, this field speeds up the Power On Self Test (POST) after the system is turned on. If it is set to

Enable, BIOS will skip some items.......................................................................................................................... 28

APIC stands for Advanced Programmable Interrupt Controller. The default setting is Disabled.............................28

This Item is for setting the Frame Buffer (Share system memory as display memory)...........................................28

This Item is to set display device ............................................................................................................................ 28

This item sets the mode for dynamic video memory technology (DVMT)...............................................................28

This item sets the DVMT size .................................................................................................................................28

5.3 POWER SETUP............................................................................................................................................................................28

Enable this function to support ACPI (Advance Configuration and Power Interface).............................................. 29

This options for this field are S1 (POS) and S3 (STR). By default, the field is set to S1 (POS).............................. 29

The field sets the system power status whether on or off when power returns from a power failure. ..................... 29

This item allows you to choose the Type of Power Supply in use.The Choice: AT, ATX........................................ 29

5.4 PNP/PCI SETUP...........................................................................................................................................................................29

3

Thus field allows you to determine whether to reset the configuration data or not. The default value is “Disabled”.29

5.5 PERIPHERALS SETUP ................................................................................................................................................................30

5.6 PC HEALTH SETUP .....................................................................................................................................................................31

5.7 BOOT SETUP ...............................................................................................................................................................................31

5.8 EXIT SETUP..................................................................................................................................................................................32

5.9 BIOS UPDATE ..............................................................................................................................................................................33

4

0. PREFACE

0.1 COPYRIGHT NOTICE AND DISCLAIMER

This document is copyrighted, 2008, by Acrosser Technology Co., Ltd. All rights are reserved. No part

of this manual may be reproduced, copied, transcribed, stored in a retrieval system, or translated into

any language or computer language in any form or by any means, such as electronic, mechanical,

magnetic, optical, chemical, manual or other means without the prior written permission or original

manufacturer.

Acrosser Technology assumes no responsibility or warranty with respect to the content in this manual

and specifically disclaims any implied warranty of merchantability or fitness for any particular purpose.

Furthermore, Acrosser Technology reserves the right to make improvements to the products described

in this manual at any times without notice. Such revisions will be posted on the Internet

(WWW.ACROSSER.COM)

as soon as possible.

Possession, use, or copy of the software described in this publication is authorized only pursuant to

valid written license from Acrosser or an authorized sub licensor.

ACKNOWLEDGEMENTS

Acrosser, AMI, IBM PC/AT, ALI, Windows 3.1, MS-DOS…are registered trademarks.

All other trademarks and registered trademarks are the property of their respective owners.

0.2 WELCOME TO THE AR-B5630 CPU BOARD

This guide introduces the Acrosser AR-B5630 CPU Board.

Use information provided in this manual describes this card’s functions and features. It also helps you

start, setup and operate your AR-B5630. General system information can also be found in this

publication.

0.3 BEFORE YOU USE THIS GUIDE

Please refer to the Chapter 3, “Setting System,” in this guide, if you have not already installed this

AR-B5630. Check the packing list before you install and make sure the accessories are completely

included.

AR-B563 CD provides the newest information regarding the CPU card. Please refer to the files of the

enclosed utility CD. It contains the modification and hardware & software information, and adding the

description or modification of product function after manual printed.

0.4 RETURNING YOUR BOARD FOR SERVICE

If your board requires any services, contact the distributor or sales representative from whom you

purchased the product for service information. If you need to ship your board to us for service, be sure

it is packed in a protective carton. We recommend that you keep the original shipping container for this

purpose.

You can help assure efficient servicing for your product by following these guidelines:

1. Include your name, address, daytime telephone, facsimile number and E-mail.

2. A description of the system configuration and/or software at the time of malfunction.

3. A brief description of the problem occurred.

0.5 TECHNICAL SUPPORT AND USER COMMENTS

Users comments are always welcome as they assist us in improving the quality of our products and the

readability of our publications. They create a very important part of the input used for product

enhancement and revision.

We may use and distribute any of the information you provide in any way appropriate without incurring

any obligation. You may, of course, continue to use the information you provide.

If you have any suggestions for improving particular sections or if you find any errors on it, please send

your comments to Acrosser Technology Co., Ltd. or your local sales representative and indicate the

manual title and book number.

Internet electronic mail to: Sales@acrosser.com

[email protected]

5

0.6 STATIC ELECTRICITY PRECAUTIONS

Before removing the board from its anti-static bag, read this section about static electricity precautions.

Static electricity is a constant danger to computer systems. The charge that can build up in your body

may be more than sufficient to damage integrated circuits on any PC board. It is, therefore, important to

observe basic precautions whenever you use or handle computer components. Although areas with

humid climates are much less prone to static build-up, it is always best to safeguard against accidents

that may result in expensive repairs. The following measures should be sufficient to protect your

equipment from static discharge:

 Touch a grounded metal object to discharge the static electricity in your body (or ideally, wear a

grounded wrist strap).

 When unpacking and handling the board or other system components, place all materials on an

anti-static surface.

 Be careful not to touch the components on the board, especially the “golden finger” connectors on

the bottom of the board.

6

1. INTRODUCTION

Welcome to the AR-B5630 ECIP AT/ATX Single Board Computer. The AR-B5630 is EPIC board with

Socket P Intel Core™2 Duo or Core Duo or Core Solo and Celeron M processor and

Intel GM965 +

ICH8M Chipset. The memory contents one DDR2 SO-DIMM socket which supports up to 2GB of

memory.

Graphics display functionality is provided by Build-in Graphic Processor that supports CRT display and

LVDS interface with Single or Dual channel panel specifications. Ethernet connectivity comes from the

Broadcom BCM5787 10/100/1000 M Ethernet controller.

1.1 PACKING LIST

In addition to this User's Manual, the AR-B5630 package includes the following items:

 AR-B5630 AT/ATX Single Board

 Quick User Guide

 Utility CD(Include driver and Manual)

Accessory set ACC-5630 series for purchase separately

 ATX POWER cable (PWR2/ CON2) x 1

 DVI cable (DVI1) x 1

 Audio cable (AUDIO1) x 1

 USB Cable (with screws) x 1

 PS/2 to PS/2 Y-cable (KM1) x 1

 40/44-Pin IDE Cable X1

 Serial port cable (COM) x 2

 SATA HDD Cable (SATA1) x 1

 SATA POWER cable (CON3) x 1

7

1.2 SPECIFICATIONS

Specifications (Proposed Specifications)

Model Name  AR-B5630 V 1.0

Product

Descriptions

EPIC SBC support 65nm Intel uFC-PGA 478 Core 2 Duo/Core Duo/Core Solo/Celeron M

Processors with Dual Gigabit LANs / LCD / TV out / DVI

General Note

CPU  Socket for Intel uFC-PGA 478 Core 2 Duo/Core Duo/Core

Solo/Celeron M, Coolers required.

BIOS AWARD

System Chipsets  Intel GM965 + ICH8M

System Memory  One SO-DIMM socket support 667/533 MHz DDR2 SDRAM up to

2GB

Watchdog Timer Software programmable 1~255 Seconds

Battery Lithium Battery, 3V 220mAH For RTC

Power

Requirements

 AT: 12V Single Voltage Input

 ATX: power switch pin header and pin header for external 5V stand-by

input

Pin Header

Hardware

monitoring

1. CPU voltage

2. CPU and System Temperature

3. System and CPU FAN speed

4. System Fan Speed Control same as AR-B1892 (connector color

different from CPU Fan connector)

BIOS Support

ProtectU N/A

LED 2 LEDs for Power and HDD

Power LED (Green), HDD (Orange) refer to AR-B1831

Button Reset button (use pin header) PinHeader(2.0mm)

Fan connector 1. CPU fan

2. System Fan with temperature controller (connector color different

from CPU Fan connector)

OS Win XP/XP Embedded, WinCE, Linux, Vista

Video

Graphic

Controller

Intel GM965 integrated GMA X3100 graphic controller

VGA Memory: Intel DVMT 4.0 supports Max 224 MB shared video

memory

Dual Display

CRT 1 x VGA port D-Sub15

DVI 1 x DVI port Pin Header

TV Out 1 x TV Out (S-Video) Pin header

LCD 1 x Dual Channel 18/24-bits LVDS Interface

LCD inverter power connector and ON/OFF control

Support 3.3V and 5V LCD

Hirose

Audio

Audio Interface 5.1 CH Audio Realtek ALC662 Pin Header

Storage

IDE 1 x E-IDE 44-Pin Header

SSD 1 x Compact Flash Type-II Type-II Socket

FDC N/A

SATA 1 x SATA interface

One with standard SATA connector

1xSATAConnector

Network Interface

Ethernet 1 x Broadcom BCM5787 (10/100/1000Mbps)

1 x Broadcom BCM5787 (10/100/1000Mbps)

Boot on LAN, WOL

RJ45

8

I/O

1 x RS-232 (COM1) DB9

Serial Port

2 x RS-232 (COM3/4)

1 x RS-232/422/485 (COM2)

Pin Header

Touch Screen N/A

Parallel Port N/A

GPIO 8 Independent TTL level I/O PinHeader

(2x5x2.0)

USB 2 x External ports

2 x Internal ports

Connector

Pin Header

(1x5x2.0)

IrDA N/A PinHeade

Audio 5.1 CH Audio Pin Header

Expansion slot 1 x PCI-104 (PCI Interface) Slot

Keyboard/ Mouse 1 x PS/2 for Keyboard and Mouse Connector

Mechanical

Dimension 115mm x 165mm (4.528 x 6.496 inches)

Operating

Temperature

0~60

o

C (32~140

o

F)

Storage

Temperature

-20~80

o

C (-4~176

o

F)

Relative Humidity 0 to 90% @ 40°C, non-condensing (95% @ 40°C, Non-Condensing by request)

EMC & Safety

EMC CE, FCC Class A

Safety N/A

1.3 BLOCK DIAGRAM

10

2. INSTALLATION

This chapter describes how to install the AR-B5630. At first, the layout of AR-B5630 is shown, and the

unpacking information that you should be careful is described. The jumpers and switches setting for the

AR-B5630’s configuration are as below.

2.1 AR-B5630'S BOARD DIMENSIONS

11

3. CONNECTION

The connectors on AR-B5630 allows you to connect external devices such as USB devices, serial port

drives, hard disk devices, etc. The following table lists the connectors on AR-B5630 and their

respective functions.

1. AT

2. ATX

3. SATA POWER

4. SERIRQ CONNECTOR

5. CPU FAN CONNCTOR

6. PCI 104 CONNECTOR

7. SATA CONNECTOR

8. IDE

9. KB_CLK CONNECTOR

10. CF MASTER SELECT

11. COMS BAT CONNECTOR

12. COMSCLACER CONNECTOR

13. KB/MS

14. INTERNAL USB CONN

15. USB CONNECTOR

16. LAN2

17. LAN1

18. VGA

19. DVI-I

20. TV CON

21. COM1

22. COM4

23. COM2

24. COM3

25. SYSTEMES FAN

26. AUDIO

27. PANEL CONNECTOR

28. GPIO

29

. RS232/422/485 SELECT

30. RS422/485 CONNECTOR

31. LCD VCC SELECT

32. INVERTER CONNECTOR

33. LVDS CONNCTOR

12

1.DDR2ONNECTOR

2.CF CONNECTOR

13

3.1 AT POWER INPUT (PWR2)

3.2 ATX FUNCTION CONNECTOR (CON2)

3.3 SATA POWER (CON3)

3.4 SERIRQ CONNECTOR (JP2)

SET SIGNAL

1 GND

2 GND

3 +12V

4 +12V

SET SIGNAL

1 GND

2 PS_ON

3 +5V_SUS

SET SIGNAL

SHORT SERIRQ(Default)

OPEN NOT SERIRQ

14

3.5 CPU FAN (FAN1)

3.6 PCI104 (J10)

3.7 SATA CONNECTOR (SATA1)

PIN SIGNAL PIN SIGNAL

1 GND 2 Tx+

3 Tx- 4 GND

5 Rx+ 6 Rx-

7 GND

PIN SIGNAL

1 GND

2 +12V

3 SENSE

15

3.8 PATA CONNECTOR (IDE1)

Pin Signal Pin Signal

1 -RESET 2 GROUND

3 DATA 7 4 DATA 8

5 DATA 6 6 DATA 9

7 DATA 5 8 DATA 10

9 DATA 4 10 DATA 11

11 DATA 3 12 DATA 12

13 DATA 2 14 DATA 13

15 DATA 1 16

DATA 14

17 DATA 0 18 DATA 15

19 GROUND 20

N.C

21 PDDREQ 22 GROUND

23 -PDIOW 24 GROUND

25 -PDIOR 26 GROUND

27 PIORDY 28 GROUND

29

-PDDACK

30 GROUND

31

IRQ14

32

N.C

33

PDA1

34

PD66/100

35

PDA0

36

PDA2

37

-PDCS1

38

-PDCS3

39

HLEDP

40

GROUND

3.9 KEYBOARD LOCK (J11)

3.10 CFMASTER SELECT (J8)

SET SIGNAL

SHORT MASTER

OPEN SLAVE(Default)

16

3.11 BATTERY CONNECTOR (BAT1)

3.12 COMS CLAER CONNECTOR(J5)

3.13 EYBOARD/MOUSE CONNECTOR (KM1)

1 KDT

3 GND

2 MDT

6 MCLK

4 VCC

1

2

3

4

5

6

5 KCLK

KM

Front View

3.14 INTERNAL USB CONNECTOR (USB2)

PIN SIGNAL PIN SIGNAL

1 +5V 2 +5V

3 USB0- 4 USB1-

5 USB0+ 6 USB1+

7 GND 8 GND

9 GND 10 GND

3.15 EXTERNAL USB (USB1)

PIN SIGNAL PIN SIGNAL

1 +5V 5 +5V

2 USB0- 6 USB1-

3 USB0+ 7 USB1+

4 GND 8 GND

17

3.16 RJ45 CONNECTOR (LAN2)

18

3.17 RJ45 CONNECTOR (LAN1)

18

3.18 DB-15 VGA CONNECTOR (VGA1)

PIN (LAN1 FUNCTION

1 TPTX+

2 TPTX -

3 TPRX+

4 Not Used

5 Not Used

6 TPRX -

7 Not Used

8 Not Used

PIN (LAN1 FUNCTION

1 TPTX+

2 TPTX -

3 TPRX+

4 Not Used

5 Not Used

6 TPRX -

7 Not Used

8 Not Used

18

3.19 DVI-I CONNECTOR (DVI1)

3.20 TV-OUT (TVCON1)

PIN SIGNAL PIN SIGNAL

1 RED 9

+5V

2 GREEN 10 GND

3 BLUE 11 NC

4 NC 12 SDA

5 GND 13 HSYNC

6 GND 14 VSYNC

7 GND 15 SCL

8 GND

PIN SIGNAL PIN SIGNAL

1 GND 26 TD0+

2 TD0- 25 GND

3 TD1+ 24 TD1-

4 GND 23 TD2+

5 TD2- 22 GND

6 TCK+ 21 TCK-

7 HPD 20 SCL1

8 VCC 19 SDATA1

9 RED 18 GND

10 GREEN 17 GND

11 BLUE 16 GND

12 VSYNC 15 SCL2

13 HSYNC 14 SDATA2

PIN SIGNAL PIN SIGNAL

1 Y-G 2 N/A

3 GND 4 N/A

5 CVBS/Pb-G 6 N/A

7 GND 8 N/A

9 C/Pr-G 10 N/A

11 GND 12 N/A

13 GND 14 N/A

19

3.21 COM2 (COM1)

3.22 COM1 (CON1)

3.23 COM3 (COM2)

PIN SIGNAL PIN SIGNAL

1 /DCDB 2 /DSRB

3 RXDB 4 /RTSB

5 TXDB 6 /CTSB

7 /DTRB 8 /RIB

9 GND

PIN SIGNAL PIN SIGNAL

1 /DCDB 2 /DSRB

3 RXDB 4 /RTSB

5 TXDB 6 /CTSB

7 /DTRB 8 /RIB

9 GND

PIN SIGNAL PIN SIGNAL

1 /DCDB 2 /DSRB

3 RXDB 4 /RTSB

5 TXDB 6 /CTSB

7 /DTRB 8 /RIB

9 GND

20

3.24 COM4 (COM3)

3.25 SYSTEM FAN (FAN2)

3.26 AUDIO CONNECTOR (AUDIO1)

PIN SIGNAL PIN SIGNAL

1

LINE

OUT R

2

LINE

OUT L

3 GND 4 N.A

5

LINE IN

R

6

LINE IN

L

7 GND 8 N.A

9 N/A 10 MIC IN

11 GND 12 GND

13 N/A 14 N/A

15 N/A 16 N/A

PIN SIGNAL PIN SIGNAL

1 /DCDB 2 /DSRB

3 RXDB 4 /RTSB

5 TXDB 6 /CTSB

7 /DTRB 8 /RIB

9 GND

PIN SIGNAL

1 GND

2 CONTROL

3 SENSE

Page is loading ...

Acrosser Technology AR-B5630 User manual

Acrosser Technology AR-B5630 User manual

Related papers

Other documents