Paradyne COMSPHERE 3611 Important information

January 1998

** SPECIAL NOTICE **

READ FIRST

Follow these steps to ensure correct operation of your Dial Backup

Module (DBM):

1. Review the

3600 Series DBM Option Installation Instructions

Document No. 3610-A2-GZ52

Those instructions explain how to

determine whether you also must first install new firmware.

2. If necessary, install new firmware according to the

3600 Series Firmware

Installation Instructions

, Document No. 3610-A2-GZ43.

3. Install the DBM according to the

3600 Series DBM Option Installation

Instructions.

4. If you did not install new firmware, go to Step 7.

5. Using the Confg menu from the front panel, load the factory default

settings. The DSU will not function properly unless the factory

default settings are reloaded.

6. Using the Confg menu from the front panel, verify that directories, phone

numbers, and SPIDs have been cleared. If they have not, clear them

now.

7. Enter and save any directories, phone numbers, and SPIDs. Make and

save any other configuration changes you require.

8. Cycle power to the unit.



*3610–A2–GK44–00*

This manual is also suitable for

Download PDF