Eagle E-M1DVR Operating instructions

Brand: Eagle

Model: E-M1DVR

Type: Operating instructions

E-M1DVR

Key Chain Remote Control Operation Manual

Camera

MIC

Photo

Power On/Record

Power Off

1.Names & Parts

Reset

Charge/Record/Photo

LED

Charge--Green Light

Record--Red Light

Photo--Red Light

last 5 seconds

Power On LED

--Flash Blue

Light

2.Battery Charge

Step 1: Remove the cover

Push

Push

Step 2:Pull out the cover

Pull

Step 3: Connect the USB cable lead from the attached charger

3. Operation

1.1 To power on the E-M1DVR, press and hold the Power/Rec Key for about 2-3

seconds until the blue LED on the bottom of the E-M1DVR is on then release the

key.

1.2 The blue LED will blink indicating the system is in standby mode.

1.3 To record, gently press Power/Rec Key once. The red LED on the bottom of the

E-M1DVR will illuminate on to show it is recording .

1.4 To stop recording, press Power/Rec Key again and the E-M1DVR will stop

recording. Depending on the file size, it takes 2 to 10 seconds for the red LED to go

out.

1.5 To snapshot, simply press Photo Capture Key once. The red LED will illuminate on

and automatically go out when the photo file is saved.

1.6 Press Power Off Key once to turn off the E-M1DVR. The blue LED will go out

shortly.

2. Connecting to PC

2.1 Install the KMPlayer to your PC from the supplied disc. (Free download the

KMplayer software from the

http://imgcdn.pandora.tv/pan_img/KMP/Download/kmp.exe

).

2.2 Press Power/Rec Key to turn on the E-M1DVR. Remove the cover from the bottom

of the E-M1DVR then connect it to the computer wit h the supplied USB cable.

2.3 When connected to a computer the E-M1DVR is re cognized as removable hard

drive named “DVR”.

2.4 Double-click the “DVR” then two folders named “Video” and “Audio” will appear.

User may now move/copy files between “DVR” and computer.

2.5 When finished, you must eject the removable hard drive before unplugging the USB

cable.

3. Date and Time Setting(for Windows XP)

3.1 Right-click your mouse on Windows desktop. Choose Notepad from the menu to

create a .txt file.

3.2 Double click on the newly created Notepad file.

3.3 Assuming the current time is 2009, March, 9 14:00pm. Enter the date time

information identically as below,

2009-03-09 14:00:00

Please note the format MUST be identically as example above. A space must be

present in between date and hour and time must be in 24-hour format.

3.4 After entering the date and time information click on “File” then choose “save as”.

3.5 Name the file as datetime.dat and save. (Please note to change the file format

from .txt to .dat)

3.6 Power on the E-M1DVR then connect it to the co mputer.

3.7 Copy the datetime.dat file from your Windows desktop to the root directory of

E-M1DVR (it is recognized as “DVR” by computer.)

3.8 Disconnect the E-M1DVR from computer. Now the date and time setting is

completed.

3.9 To reset date and time repeat above steps.

1
2
3
4
5

Eagle E-M1DVR Operating instructions

Brand: Eagle

Model: E-M1DVR

Type: Operating instructions

Other documents