Blodgett B18C-S Datasheet
- Category
- Multimedia carts & stands
- Type
- Datasheet
SECTIONALSPREADER PLATES
BLODGETT
www.blodgett.com
1100 Old Honeycutt Road Fuquay-Varina, NC 27526 USA
Phone: (877) 255-3976 • Fax: (866) 644-1354
SPECIFY
Gas Type Natural Gas Propane
Manifold Front (1-1/4”) Rear (1”)
Flue Riser Height 5” 24” (option) 36” (option)
Range Depth Standard Deep (option)
Position in Battery Left End Right End Not at End
Operating altitude (if above 2000 ft (700 meters) _____________________
Blodgett can often accommodate special or custom requirements. Contact your
Blodgett representative.
STANDARD FEATURES (
All models)
5” flue riser
7" stainless-steel front rail with “belly bar”
Standard range depth
Battery end-units have solid side (no manifold cover plate)
Stainless-steel front and sides
6" adjustable legs (except on modular range-top model)
Warranty: two year parts and labor from date of purchase
STANDARD FEATURES (Base Cabinets)
Stainless-steel door
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Flue riser
24”
36”
Single-shelf (mounts on 24” flue riser)
Solid shelf
Tubed shelf
Double-shelf (mounts on 36” flue riser)
Solid shelves
Tubed shelves
Stainless-steel back
Deep range depth
Bolt down flange feet
Casters (in lieu of legs)
Cable restraint kit for units on casters
Sectional Spreader Plates
Project
Item No.
Quantity
Model B12C-S (12” wide spreader plate with cabinet base)
Model B12N-S (12” wide modular spreader plate)
Model B18C-S (18” wide spreader plate with cabinet base)
Model B18N-S (18” wide modular spreader plate)
Model B24C-SS (24” wide spreader plate with cabinet base)
Model B24N-SS (24” wide modular spreader plate)
Model B36C-SSS (36” wide spreader plate with cabinet base)
Model B36N-SSS (36” wide modular spreader plate)
The Blodgett sectional spreader plate is available in four widths with a
either a storage cabinet or with no base (for mounting as a modular top).
Three flue-riser heights are available, and the flue riser can support up to
250 lbs for an optional shelf. An optional rearward-extending flue riser is
available to increase the overall depth to match a deep battery. Battery-
design assistance is available!
Model B12C-S with 24” Flue Riser
BLODGETT
www.blodgett.com
1100 Old Honeycutt Road Fuquay-Varina, NC 27526 USA
Phone: (877) 255-3976 • Fax: (866) 644-1354
SECTIONAL SPREADER PLATES
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components without prior notice
APPROVAL/STAMP
P/N BR00037 Rev B (7/07)
MODEL WIDTH A DEPTH HEIGHT
CRATE SIZE
CRATED
VOLUME
CRATED
WEIGHT
Width Height Depth
B12N-S 12” (305) 37.5” (953) 36” (914) 20” (508) 21” (534) 42.5” (1080) 10.3 cu ft (0.29 cu m) 100 lbs (45 kg)
B12C-S 12” (305) 37.5” (953) 36” (914) 20” (508) 45” (1144) 42.5” (1080) 22.1 cu ft (0.63 cu m) 121 lbs (54 kg)
B18N-S 18” (457) 37.5” (953) 36” (914) 20” (508) 21” (534) 42.5” (1080) 10.3 cu ft (0.29 cu m) 110 lbs (49 kg)
B18C-S 18” (457) 37.5” (953) 36” (914) 20” (508) 45” (1144) 42.5” (1080) 22.1 cu ft (0.63 cu m) 131 lbs (60 kg)
B24N-SS 24” (610) 37.5” (953) 36” (914) 39” (991) 21” (534) 44” (1118) 23.5 cu ft (0.67 cu m) 150 lbs (68 kg)
B24C-SS 24” (610) 37.5” (953) 36” (914) 39” (991) 42.5” (1080) 44” (1118) 42.2 cu ft (1.2 cu m) 180 lbs (81 kg)
B36N-SSS 36” (914) 37.5” (953) 36” (914) 45.5” (1156) 23” (584) 55” (1397) 33.3 cu ft (0.95 cu m) 220 lbs (99 kg)
B36C-SSS 36” (914) 37.5” (953) 36” (914) 45.5” (1156) 45” (1143) 55” (1397) 65.2 cu ft (1.85 cu m) 260 lbs (117 kg)
-
1
-
2
Blodgett B18C-S Datasheet
- Category
- Multimedia carts & stands
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Blodgett B24C-HH Datasheet
-
-
-
-
-
Blodgett B36C-GRAD Owner's manual
-
-
-
-