califone.com
7
4.2 RECHARGING BELTPACKS WITH THE WS-CH
1. Connectthepoweradapter(WS-CHP)tothewalloutletandthen
totheDCINjackonthebackoftheWS-CH4xCharger.
2. Connectupto4WS-TorWS-Rbeltpackstothecharging
leadsontheWS-CHunit.Thebeltpackswillimmediatelybegin
charging.AredLEDontheWS-CHindicatestheunitischarging.
AgreenLEDindicatesthatchargingiscomplete.
3. Forchargingmorethan4beltpackssimultaneously,upto3WS-
CHchargersmaybedaisy-chainedtorecharge12beltpacks
simultaneously.
NOTE:Thebeltpackmaybeoperatedwhilerecharging.
4.3 RECHARGING A BELTPACK WITH THE WS-CR
1. Connectthepoweradapter(includedwiththeWS-CR)tothe
walloutletandthentotheDCINjackonthebackoftheWS-CR
chargingcradle.
2. InserttheWS-TorWS-RbeltpackintotheWS-CRunituntilit
clicksintoplace.Theunitwillimmediatelybegincharging.Ared
LEDontheWS-CRindicatestheunitischarging.AgreenLED
indicatesthatchargingiscomplete;however,theLEDwillonly
turngreenifthebeltpackpoweristurnedoff.
NOTES:
• Thebeltpackmaybeoperatedwhilerecharging.
• Thecradlecanbehungonthewallusingstandardscrews.
4.4 POWER ON AND OFF (WS-T & WS-R)
1. Toturnonthebeltpackpower,holdthepowerbuttonfor2-3
seconds.TheLCDwilllightupwiththecurrentsettings.The
powerLEDonthetopofthebeltpackwilllightgreen.
2. Toturnoffthebeltpackpower,holdthepowerbuttonfor2-3
seconds.
NOTE:Whenthebatteryisrunninglow,thepowerLEDwillturnred.
4.5 MANUAL CHANNEL SELECTION (WS-T & WS-R)
1. First,turnonthepoweroftheWS-TorWS-Rbeltpackusingthe
poweronprocedureinsection4.4.
2. FortheWS-Ttransmitter,ensurethatthechannelyouwantto
useisnotalreadyinuseandthatthefrequencyisclearofany
interference.
3. Changethechannelonthebeltpack.Todothis,rstensurethat
theCHANNELLOCKswitchonthebackoftheunitisswitched
toOFF .ThenpresstheCHANNELUPorCHANNELDOWN
buttonstochangethechannel.Tomovequicklythroughthe
channellist,holdtheCHANNELUPorCHANNELDOWNbutton.
4. Oncethedesiredchannelisselected,it’ssuggestedtoputthe
CHANNELLOCKswitchintheON positionsothatthechannel
isnotchangedaccidentally.