Hasbro Bump 'N Go Web Rider User manual

Category
Toy vehicles
Type
User manual

This manual is also suitable for

Product and colors may vary.
Spider-Man and all related characters and the distinctive likeness thereof: TM & © 2007 Marvel Characters, Inc.
Spider-Man 3, the Movie: TM & © 2007 Columbia Pictures Industries, Inc All rights reserved
www.marvel.com
®* and/or TM* and © 2006 Hasbro. All Rights Reserved.
TM & ® denote U.S. Trademarks.
AGES
3+
69132/69128 Asst.
P/N: 6626990000
CAUTION:
1. Always follow the instructions carefully. Use only batteries specified and be sure
to insert item correctly by matching the + and polarity markings.
2.
Do not mix old batteries and new batteries or standard (carbon-zinc) with alkaline batteries.
3. Remove exhausted or dead batteries from the product.
4. Remove batteries if product is not to be played with for a long time.
5. Do not short circuit the supply terminals.
6. Should this product cause, or be affected by, local electrical interference, move
it away from other electrical equipment. Reset (switching off and back on again or
removing and re-inserting batteries) if necessary.
7. RECHARGEABLE BATTERIES: Do not mix these with any other types of battery.
Always remove from the product before recharging. Recharge batteries under adult
supervision. DO NOT RECHARGE OTHER TYPES OF BATTERIES.
CAUTION: TO AVOID BATTERY LEAKAGE
1. Be sure to insert the batteries correctly and always follow the toy and
battery manufacturers’ instructions;
2. Do not mix old and new batteries or alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium) batteries;
3. Always remove weak or dead batteries from the product.
IMPORTANT: BATTERY INFORMATION
Please retain this information for future reference. Batteries should be replaced by an adult.
Questions? Call: 1-800-327-8264
Not suitable for children
under 3 years because of
small parts — choking hazard.
®
*
Battery Symbols
Battery Statements
updated 11.7.05
AAA AA C D 9.5V
CR2032
A76/LR44
BATTERIES
INCLUDED
Replace with 3 x 3.0V
“CR2032” lithium
batteries. Phillips/cross
head screwdriver (not
included) needed to
replace batteries.
x3
CR2032 Lithium
BATTERIES INCLUDED
Replace with 3 x 3.0V “CR2032” lithium batteries.
Phillips/cross head screwdriver (not included)
needed to replace batteries.
x3
CR2032 Lithium
BATTERIES INCLUDED
Replace with 3 x 3.0V “CR2032” lithium batteries. Phillips/cross
head screwdriver (not included) needed to replace batteries.
x3
CR2032 Lithium
PRODUCTS THAT DO NOT INCLUDE BATTERIES:
Products that do NOT include but require AAA, AA, C, D, 9V
batteries should declare that alkaline ("LR") type batteries
are recommended.
Motorized products that do NOT include but require AAA, AA, C,
D, batteries should declare that alkaline ("LR") type batteries
are required.
PRODUCTS THAT INCLUDE BATTERIES:
Products that include AAA, AA, C, D, 9V batteries should declare
that batteries are included and recommend replacement with
alkaline batteries.
PRODUCTS THAT INCLUDE BUTTON CELLS:
Products that include CR2032 or CR2016 button cell batteries
should have the following battery statement:
Motorized products that include AAA, AA, C, D, 9V batteries should
declare that batteries are included and replacement with alkaline
batteries is required.
Products that include A76/LR44 button cell batteries should have
the following battery statement:
BATTERIES
INCLUDED
Replace with 3 x 1.5V
A76 or LR44 size
alkaline batteries.
Phillips/cross head
screwdriver (not
included) needed to
replace batteries.
x3
A76/LR44 Alkaline
BATTERIES INCLUDED
Replace with 3 x 1.5V A76 or LR44 size alkaline batteries.
Phillips/cross head screwdriver (not included) needed to
replace batteries.
x3
A76/LR44 Alkaline
BATTERIES INCLUDED
Replace with 2 x 1.5V A76 or LR44 size alkaline batteries.
Phillips/cross head screwdriver (not included) needed to replace batteries.
x2
A76/LR44 Alkaline
BATTERIES INCLUDED
Replace with 3 x 1.5V A76 or LR44 size alkaline
batteries. Phillips/cross head screwdriver (not
included) needed to replace batteries.
x3
CR2032 Lithium
BATTERIES INCLUDED
BATTERIES
REQUIRED
x3
1.5V AAA
R03 size
Alkaline batteries
recommended.
Phillips/cross head
screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
x3
BATTERIES REQUIRED
1.5V AAA/R03 size
Alkaline batteries recommended.Phillips/cross
head screwdriver (not included) needed to
insert batteries.
NOT INCLUDED
BATTERIES REQUIRED
x3
1.5V AAA/R03 size
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
NOT INCLUDED
BATTERIES
REQUIRED
x3
1.5V AAA
R03 size
Alkaline batteries
recommended.
Phillips/cross head
screwdriver
(not included)
needed to insert
batteries.
NOT INCLUDED
BATTERIES
INCLUDED
x3
1.5V AAA/R03 size
Replace with 3 x 1.5V “AAA
or R03 size batteries.
Alkaline batteries recommended.
Phillips/cross head screwdriver
(not included) needed to
insert batteries.
x3
BATTERIES INCLUDED
1.5V AAA/R03 size
Replace with 3 x 1.5V “AAAor R03 size batteries.
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
x2
BATTERIES INCLUDED
1.5V AA/R6 size
Replace with 2 x 1.5V “AA” or R6 size batteries.
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
BATTERIES INCLUDED
x3
1.5V AAA/R03 size
Replace with 3 x 1.5V “AAAor R03 size batteries.
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
BATTERIES
INCLUDED
x3
1.5V AAA
R03 size
Replace with 3 x
1.5V “AAAor R03
size batteries.
Alkaline batteries
recommended.
Phillips/cross head
screwdriver
(not included) needed
to insert batteries.
BATTERIES
ALKALINE
REQUIRED
x3
1.5V AAA
LR03 size
Phillips/cross head
screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
x3
BATTERIES
ALKALINE
REQUIRED
1.5V AAA/LR03 size
Phillips/cross head screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
x3
1.5V AAA/LR03 size
Phillips/cross head screwdriver (not included) needed
to insert batteries.
NOT INCLUDED
ALKALINE BATTERIES REQUIRED
x3
1.5V AAA
LR03 size
Phillips/cross head
screwdriver
(not included)
needed to insert
batteries.
BATTERIES
ALKALINE
REQUIRED
NOT INCLUDED
BATTERIES
INCLUDED
x3
Replace with 3 x 1.5V “AAA
or LR03 size alkaline batteries .
Phillips/cross head screwdriver
(not included) needed to insert
batteries.
BATTERIES
INCLUDED
x4
Replace with 4 x 1.5V “AA”
or LR6 size alkaline batteries .
Phillips/cross head screwdriver
(not included) needed to insert
batteries.
x3
BATTERIES INCLUDED
Replace with 3 x 1.5V “AAAor LR0.3 size alkaline
batteries . Phillips/cross head screwdriver (not included)
needed to insert batteries.
BATTERIES INCLUDED
x3
Replace with 3 x 1.5V “AAAor LR03 size alkaline batteries . Phillips/cross head screwdriver
(not included) needed to insert batteries.
BATTERIES
INCLUDED
x3
Replace with 3 x 1.5V
“AAA” or LR03 size
alkaline batteries .
Phillips/cross head
screwdriver (not
included) needed to
insert batteries.
x2
BATTERIES
ALKALINE
REQUIRED
1.5V AA/LR6 size
Phillips/cross head screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
Replace with 2 x 1.5V A76 or LR44 button cell
batteries. Phillips/cross head screwdriver (not
included) needed to replace batteries.
x2
A76/LR44 Alkaline
BATTERIES INCLUDED
BATTERIES INCLUDED
Replace with 2 x 1.5V AG3 or LR41 button cell
batteries. Phillips/cross head screwdriver (not
included) needed to replace batteries.
x2
AG3/LR41 Button Cell
BATTERIES INCLUDED
x3
BATTERIES
ALKALINE
REQUIRED
1.5V AA/LR6 size
Phillips/cross head screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
Bump & Go SPIDER-MAN
Web Rider
To install batteries:
1. Using a Phillips/cross head
screwdriver (not included),
unscrew battery cover.
2. Insert 2 fresh 1.5 V “AA”
or LR6 batteries. See diagram
for polarity.
3. Replace battery cover and
tighten screw.
  • Page 1 1

Hasbro Bump 'N Go Web Rider User manual

Category
Toy vehicles
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI