Hasbro 79037 User manual

Hasbro
Brand
Hasbro
Model
79037
Category
Pressure cookers
Type
User manual

This manual is also suitable for

Hasbro 79037 is a motorized product requiring 2x 1.5V "AA" or LR6 size batteries to operate. It features a Class 1 LED product, which refers to the classification of its LED light source based on its optical radiation safety level. The device comes with 3x 1.5V "AAA" or LR03 size alkaline batteries included, but you will need a Phillips/cross head screwdriver (not included) to insert the batteries.

Please retain this information for future reference, as the batteries should be replaced by an adult.

Hasbro 79037 is a motorized product requiring 2x 1.5V "AA" or LR6 size batteries to operate. It features a Class 1 LED product, which refers to the classification of its LED light source based on its optical radiation safety level. The device comes with 3x 1.5V "AAA" or LR03 size alkaline batteries included, but you will need a Phillips/cross head screwdriver (not included) to insert the batteries.

Please retain this information for future reference, as the batteries should be replaced by an adult.

Product and colors may vary.
Spider-Man and all related characters: TM & © 2006 Marvel Characters, Inc. Spider-Man movie elements:
© 2002-2006 Columbia Pictures Industries, Inc. All rights reserved. Licensed by Spider-Man Merchandising L.P.
®* and/or TM* & © 2006 Hasbro. All Rights Reserved.
TM & ® denote U.S. Trademarks.
Hasbro Canada, Longueuil, QC, Canada J4G 1G2
AGES
3+
79040/79037 Asst.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy, and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
TM
P/N: 6613440000
CAUTION:
1. Always follow the instructions carefully. Use only batteries specified and be sure
to insert item correctly by matching the + and – polarity markings.
2.
Do not mix old batteries and new batteries or standard (carbon-zinc) with alkaline batteries.
3. Remove exhausted or dead batteries from the product.
4. Remove batteries if product is not to be played with for a long time.
5. Do not short circuit the supply terminals.
6. Should this product cause, or be affected by, local electrical interference, move
it away from other electrical equipment. Reset (switching off and back on again or
removing and re-inserting batteries) if necessary.
7. RECHARGEABLE BATTERIES: Do not mix these with any other types of battery.
Always remove from the product before recharging. Recharge batteries under adult
supervision. DO NOT RECHARGE OTHER TYPES OF BATTERIES.
IMPORTANT: BATTERY INFORMATION
Please retain this information for future reference. Batteries should be replaced by an adult.
Class 1 LED product.
Bump & Go Chopper
Battery Symbols
Battery Statements
updated 11.7.05
AAA AA C D 9.5V
CR2032
A76/LR44
BATTERIES
INCLUDED
Replace with 3 x 3.0V
“CR2032” lithium
batteries. Phillips/cross
head screwdriver (not
included) needed to
replace batteries.
x3
CR2032 Lithium
BATTERIES INCLUDED
Replace with 3 x 3.0V “CR2032” lithium batteries.
Phillips/cross head screwdriver (not included)
needed to replace batteries.
x3
CR2032 Lithium
BATTERIES INCLUDED
Replace with 3 x 3.0V “CR2032” lithium batteries. Phillips/cross
head screwdriver (not included) needed to replace batteries.
x3
CR2032 Lithium
PRODUCTS THAT DO NOT INCLUDE BATTERIES:
Products that do NOT include but require AAA, AA, C, D, 9V
batteries should declare that alkaline ("LR") type batteries
are recommended.
Motorized products that do NOT include but require AAA, AA, C,
D, batteries should declare that alkaline ("LR") type batteries
are required.
PRODUCTS THAT INCLUDE BATTERIES:
Products that include AAA, AA, C, D, 9V batteries should declare
that batteries are included and recommend replacement with
alkaline batteries.
PRODUCTS THAT INCLUDE BUTTON CELLS:
Products that include CR2032 or CR2016 button cell batteries
should have the following battery statement:
Motorized products that include AAA, AA, C, D, 9V batteries should
declare that batteries are included and replacement with alkaline
batteries is required.
Products that include A76/LR44 button cell batteries should have
the following battery statement:
BATTERIES
INCLUDED
Replace with 3 x 1.5V
“A76” or LR44 size
alkaline batteries.
Phillips/cross head
screwdriver (not
included) needed to
replace batteries.
x3
A76/LR44 Alkaline
BATTERIES INCLUDED
Replace with 3 x 1.5V “A76” or LR44 size alkaline batteries.
Phillips/cross head screwdriver (not included) needed to
replace batteries.
x3
A76/LR44 Alkaline
BATTERIES INCLUDED
Replace with 2 x 1.5V “A76” or LR44 size alkaline batteries.
Phillips/cross head screwdriver (not included) needed to replace batteries.
x2
A76/LR44 Alkaline
BATTERIES INCLUDED
Replace with 3 x 1.5V “A76” or LR44 size alkaline
batteries. Phillips/cross head screwdriver (not
included) needed to replace batteries.
x3
CR2032 Lithium
BATTERIES INCLUDED
BATTERIES
REQUIRED
x3
1.5V AAA
R03 size
Alkaline batteries
recommended.
Phillips/cross head
screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
x3
BATTERIES REQUIRED
1.5V AAA/R03 size
Alkaline batteries recommended.Phillips/cross
head screwdriver (not included) needed to
insert batteries.
NOT INCLUDED
BATTERIES REQUIRED
x3
1.5V AAA/R03 size
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
NOT INCLUDED
BATTERIES
REQUIRED
x3
1.5V AAA
R03 size
Alkaline batteries
recommended.
Phillips/cross head
screwdriver
(not included)
needed to insert
batteries.
NOT INCLUDED
BATTERIES
INCLUDED
x3
1.5V AAA/R03 size
Replace with 3 x 1.5V “AAA”
or R03 size batteries.
Alkaline batteries recommended.
Phillips/cross head screwdriver
(not included) needed to
insert batteries.
x3
BATTERIES INCLUDED
1.5V AAA/R03 size
Replace with 3 x 1.5V “AAA” or R03 size batteries.
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
x2
BATTERIES INCLUDED
1.5V AA/R6 size
Replace with 2 x 1.5V “AA” or R6 size batteries.
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
BATTERIES INCLUDED
x3
1.5V AAA/R03 size
Replace with 3 x 1.5V “AAA” or R03 size batteries.
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
BATTERIES
INCLUDED
x3
1.5V AAA
R03 size
Replace with 3 x
1.5V “AAA” or R03
size batteries.
Alkaline batteries
recommended.
Phillips/cross head
screwdriver
(not included) needed
to insert batteries.
BATTERIES
ALKALINE
REQUIRED
x3
1.5V AAA
LR03 size
Phillips/cross head
screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
x3
BATTERIES
ALKALINE
REQUIRED
1.5V AAA/LR03 size
Phillips/cross head screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
x3
1.5V AAA/LR03 size
Phillips/cross head screwdriver (not included) needed
to insert batteries.
NOT INCLUDED
ALKALINE BATTERIES REQUIRED
x3
1.5V AAA
LR03 size
Phillips/cross head
screwdriver
(not included)
needed to insert
batteries.
BATTERIES
ALKALINE
REQUIRED
NOT INCLUDED
BATTERIES
INCLUDED
x3
Replace with 3 x 1.5V “AAA”
or LR03 size alkaline batteries .
Phillips/cross head screwdriver
(not included) needed to insert
batteries.
BATTERIES
INCLUDED
x4
Replace with 4 x 1.5V “AA”
or LR6 size alkaline batteries .
Phillips/cross head screwdriver
(not included) needed to insert
batteries.
x3
BATTERIES INCLUDED
Replace with 3 x 1.5V “AAA” or LR0.3 size alkaline
batteries . Phillips/cross head screwdriver (not included)
needed to insert batteries.
BATTERIES INCLUDED
x3
Replace with 3 x 1.5V “AAA” or LR03 size alkaline batteries . Phillips/cross head screwdriver
(not included) needed to insert batteries.
BATTERIES
INCLUDED
x3
Replace with 3 x 1.5V
“AAA” or LR03 size
alkaline batteries .
Phillips/cross head
screwdriver (not
included) needed to
insert batteries.
x2
BATTERIES
ALKALINE
REQUIRED
1.5V AA/LR6 size
Phillips/cross head screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
Replace with 2 x 1.5V “A76” or LR44 button cell
batteries. Phillips/cross head screwdriver (not
included) needed to replace batteries.
x2
A76/LR44 Alkaline
BATTERIES INCLUDED
To install batteries:
1. Using a Phillips/cross head
screwdriver (not included),
unscrew battery cover.
2. Insert 2 fresh 1.5 V “AA”
or LR6 batteries. See diagram
for polarity.
3. Replace battery cover and
tighten screw.
®
*
CAUTION: TO AVOID BATTERY LEAKAGE
1. Be sure to insert the batteries correctly and always follow the toy and
battery manufacturers’ instructions;
2. Do not mix old and new batteries or alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium) batteries;
3. Always remove weak or dead batteries from the product.
Not suitable for children
under 3 years because of
small parts, choking hazard.
  • Page 1 1

Hasbro 79037 User manual

Hasbro
Brand
Hasbro
Model
79037
Category
Pressure cookers
Type
User manual
This manual is also suitable for

Hasbro 79037 is a motorized product requiring 2x 1.5V "AA" or LR6 size batteries to operate. It features a Class 1 LED product, which refers to the classification of its LED light source based on its optical radiation safety level. The device comes with 3x 1.5V "AAA" or LR03 size alkaline batteries included, but you will need a Phillips/cross head screwdriver (not included) to insert the batteries.

Please retain this information for future reference, as the batteries should be replaced by an adult.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents