AGES
4+
69173
FINAL BATTLE PLAYSET
Battery Symbols
Battery Statements
updated 11.7.05
AAA AA C D 9.5V
CR2032
A76/LR44
BATTERIES
INCLUDED
Replace with 3 x 3.0V
“CR2032” lithium
batteries. Phillips/cross
head screwdriver (not
included) needed to
replace batteries.
x3
CR2032 Lithium
BATTERIES INCLUDED
Replace with 3 x 3.0V “CR2032” lithium batteries.
Phillips/cross head screwdriver (not included)
needed to replace batteries.
x3
CR2032 Lithium
BATTERIES INCLUDED
Replace with 3 x 3.0V “CR2032” lithium batteries. Phillips/cross
head screwdriver (not included) needed to replace batteries.
x3
CR2032 Lithium
PRODUCTS THAT DO NOT INCLUDE BATTERIES:
Products that do NOT include but require AAA, AA, C, D, 9V
batteries should declare that alkaline ("LR") type batteries
are recommended.
Motorized products that do NOT include but require AAA, AA, C,
D, batteries should declare that alkaline ("LR") type batteries
are required.
PRODUCTS THAT INCLUDE BATTERIES:
Products that include AAA, AA, C, D, 9V batteries should declare
that batteries are included and recommend replacement with
alkaline batteries.
PRODUCTS THAT INCLUDE BUTTON CELLS:
Products that include CR2032 or CR2016 button cell batteries
should have the following battery statement:
Motorized products that include AAA, AA, C, D, 9V batteries should
declare that batteries are included and replacement with alkaline
batteries is required.
Products that include A76/LR44 button cell batteries should have
the following battery statement:
BATTERIES
INCLUDED
Replace with 3 x 1.5V
“A76” or LR44 size
alkaline batteries.
Phillips/cross head
screwdriver (not
included) needed to
replace batteries.
x3
A76/LR44 Alkaline
BATTERIES INCLUDED
Replace with 3 x 1.5V “A76” or LR44 size alkaline batteries.
Phillips/cross head screwdriver (not included) needed to
replace batteries.
x3
A76/LR44 Alkaline
BATTERIES INCLUDED
Replace with 2 x 1.5V “A76” or LR44 size alkaline batteries.
Phillips/cross head screwdriver (not included) needed to replace batteries.
x2
A76/LR44 Alkaline
BATTERIES INCLUDED
Replace with 3 x 1.5V “A76” or LR44 size alkaline
batteries. Phillips/cross head screwdriver (not
included) needed to replace batteries.
x3
A76/LR44 Alkaline
BATTERIES INCLUDED
Replace with 6 x 1.5V “A76” or LR44 size alkaline
batteries. Phillips/cross head screwdriver (not
included) needed to replace batteries.
x6
CR2032 Lithium
BATTERIES INCLUDED
BATTERIES
REQUIRED
x3
1.5V AAA
R03 size
Alkaline batteries
recommended.
Phillips/cross head
screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
x3
BATTERIES REQUIRED
1.5V AAA/R03 size
Alkaline batteries recommended.Phillips/cross
head screwdriver (not included) needed to
insert batteries.
NOT INCLUDED
x3
BATTERIES REQUIRED
1.5V AA/R6 size
Alkaline batteries recommended.Phillips/cross
head screwdriver (not included) needed to
insert batteries.
NOT INCLUDED
BATTERIES REQUIRED
x3
1.5V AAA/R03 size
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
NOT INCLUDED
BATTERIES
REQUIRED
x3
1.5V AAA
R03 size
Alkaline batteries
recommended.
Phillips/cross head
screwdriver
(not included)
needed to insert
batteries.
NOT INCLUDED
BATTERIES
INCLUDED
x3
1.5V AAA/R03 size
Replace with 3 x 1.5V “AAA”
or R03 size batteries.
Alkaline batteries recommended.
Phillips/cross head screwdriver
(not included) needed to
insert batteries.
x3
BATTERIES INCLUDED
1.5V AAA/R03 size
Replace with 3 x 1.5V “AAA” or R03 size batteries.
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to replace batteries.
x2
BATTERIES INCLUDED
1.5V AA/R6 size
Replace with 2 x 1.5V “AA” or R6 size batteries.
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
BATTERIES INCLUDED
x3
1.5V AAA/R03 size
Replace with 3 x 1.5V “AAA” or R03 size batteries.
Alkaline batteries recommended. Phillips/cross head
screwdriver (not included) needed to insert batteries.
BATTERIES
INCLUDED
x3
1.5V AAA
R03 size
Replace with 3 x
1.5V “AAA” or R03
size batteries.
Alkaline batteries
recommended.
Phillips/cross head
screwdriver
(not included) needed
to insert batteries.
BATTERIES
ALKALINE
REQUIRED
x3
1.5V AAA
LR03 size
Phillips/cross head
screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
x3
BATTERIES
ALKALINE
REQUIRED
1.5V AAA/LR03 size
Phillips/cross head screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
x3
1.5V AAA/LR03 size
Phillips/cross head screwdriver (not included) needed
to insert batteries.
NOT INCLUDED
ALKALINE BATTERIES REQUIRED
x3
1.5V AAA
LR03 size
Phillips/cross head
screwdriver
(not included)
needed to insert
batteries.
BATTERIES
ALKALINE
REQUIRED
NOT INCLUDED
BATTERIES
INCLUDED
x3
Replace with 3 x 1.5V “AAA”
or LR03 size alkaline batteries .
Phillips/cross head screwdriver
(not included) needed to insert
batteries.
BATTERIES
INCLUDED
x4
Replace with 4 x 1.5V “AA”
or LR6 size alkaline batteries .
Phillips/cross head screwdriver
(not included) needed to insert
batteries.
x3
BATTERIES INCLUDED
Replace with 3 x 1.5V “AAA” or LR0.3 size alkaline
batteries . Phillips/cross head screwdriver (not included)
needed to insert batteries.
BATTERIES INCLUDED
x3
Replace with 3 x 1.5V “AAA” or LR03 size alkaline batteries . Phillips/cross head screwdriver
(not included) needed to insert batteries.
BATTERIES
INCLUDED
x3
Replace with 3 x 1.5V
“AAA” or LR03 size
alkaline batteries .
Phillips/cross head
screwdriver (not
included) needed to
insert batteries.
x2
BATTERIES INCLUDED
1.5V AA/R6 size
Replace with 2 x 1.5V “AA” or LR6 size alkaline
batteries. Phillips/cross head screwdriver (not
included) needed to replace batteries.
x2
BATTERIES
ALKALINE
REQUIRED
1.5V AA/LR6 size
Phillips/cross head screwdriver (not
included) needed to insert batteries.
NOT INCLUDED
BATTERIES REQUIRED
1.5V AAA/R03 size
Alkaline batteries recommended.
Phillips/cross head screwdriver (not
included) needed to insert batteries.
NOT INCLUDED
x2
Replace with 2 x 1.5V “A76” or LR44 button cell
batteries. Phillips/cross head screwdriver (not
included) needed to replace batteries.
x2
A76/LR44 Alkaline
BATTERIES INCLUDED
BATTERIES INCLUDED
Replace with 2 x 1.5V “AG3” or LR41 button cell
batteries. Phillips/cross head screwdriver (not
included) needed to replace batteries.
x2
AG3/LR41 Button Cell
BATTERIES INCLUDED
x3
BATTERIES
ALKALINE
REQUIRED
1.5V AA/LR6 size
Phillips/cross head screwdriver (not included)
needed to insert batteries.
NOT INCLUDED
x6
BATTERIES REQUIRED
1.5V AAA/R03 size
Alkaline batteries recommended.Phillips/cross
head screwdriver (not included) needed to
insert batteries.
NOT INCLUDED
x3
BATTERIES INCLUDED
1.5V AA/R6 size
Replace with 3 x 1.5V “AA” or R6 size batteries.
Alkaline batteries recommended. Phillips/cross
head screwdriver (not included) needed to
replace batteries.
Some assembly required.
No tools needed.
Class 1 LED product.
Crane Cab and Spotlight
Elevator
Cage
Web Frame Lever
Launcher Floor
Platform
"Broken" floor
Pivot
Top Mount
Smoke Effects
Sky Stick
"Broken" Strut
SPIDER-MAN® figure VENOM™ figure NEW GOBLIN™
figure
Trap Floor
C
A
3x Beam C
4x Beam A
2x Beam B
A
B
2x Web Lines
SANDMAN Figure
SANDMAN Foot
Web Frame
Crane Beam
Tower
2x Strut A 1x Strut B
Base
B
Includes:
1
To Insert Batteries in Spotlight:
Using a Phillips/cross head screwdriver (not included),
loosen screw in battery compartment cover. Remove cover
(screw will stay attached). Remove and discard batteries.
Insert 2 x 1.5 “AAA” or R03 size batteries. Alkaline batteries
recommended. Replace door and tighten screw with
screwdriver. See diagrams for polarity.
2
Assembly:
Before beginning assembly, make certain you have all
of the pieces listed in the “Includes” list on page 1.
1
Connect Struts “A” to each other
using “B” Beams and Pivot. Make
sure holes on both Struts are
facing the same direction. See
image for Beam placement.
2
Connect Tower and Strut “B” using
“C” Beams and Trap Floor. Make sure
the bottom of the Strut is even with
the non-rotating end of the Tower.
See image for Beam placement.
3
C
C
4
C
C
A
A
A
A
A A
B
B
3
Press “A” Beams into
“B” Strut and Tower.
See image for Beam
placement.
Pivot
Attach “B” Strut and Tower
assembly in upper holes in base.
5
4
Attach “A” Struts to lower holes in
base. Pivot should be facing Tower
Assembly. Attach “A” Struts and
Tower Assembly with “A” Beams.
Snap Web Frame into hole on Tower.
7
5
Slide pivot of Web Frame into
first hole above lowest I-shaped
slot in “A” Strut. See image for
proper placement. Web Frame
and Pivot should both be facing
the same direction.
6
Slide Web Frame Lever
over protruding pivot.
8
Attach “Broken” floor to Pivot.
9
Mount “C” Beam on “Broken”
Strut. See image for placement.
10
6
Snap “Broken” Strut into
base, attaching it to Tower
with “C” Beam.
11
Attach Launcher
Floor to base.
12
Attach Platform
anywhere on “A” Struts.
13
7
TOP VIEW
8
Turn set around. Slide Elevator
onto rails on Tower.
14
TOP VIEW
Slide Top Mount into rails on
Tower. Push down until it stops.
15
TOP VIEW
16
Attach Crane Beam
to top of Tower.
9
Slide Crane Cab onto
rails on Crane Beam.
17
Attach Cage to hook
on Crane string.
18
10
Attach SANDMAN foot and
head to SANDMAN figure.
19
Mount SANDMAN
on playset by aligning
holes on foot bottom
and fist with posts on
Base and Top Mount.
20
11
Time for web-slinging action!
Press tab to activate
the elevator trap door!
Attach smoke effects and
sky stick to mounting post
on crane beam.
21
12
Press lever to launch figures
from the Launcher Floor!
SANDMAN captures
figures in chest!
Figures and Web Lines
attach to posts on playset!
13
Press here
to topple
SANDMAN!
Sky stick attaches to
smoke effects in 2 ways!
Press here to blast
SANDMAN apart!
Move switch to collapse
the broken floor and drop
figures into the Web Frame!
TOP VIEW
Spider-Man and all related characters and the distinctive likeness thereof: TM & © 2007
Marvel Characters, Inc.
Spider-Man 3, the Movie: TM & © 2007 Columbia Pictures Industries, Inc. All rights reserved.
www.marvel.com
®* and/or TM* & © 2007 Hasbro. All Rights Reserved.
TM & ® denote U.S. Trademarks.
®
*
P/N: 6697880000
Not suitable for children
under 3 years because of
small parts — choking hazard.
1. As with all small batteries, the batteries used with this toy should be kept away
from small children who still put things in their mouths. If they are swallowed,
promptly see a doctor and have the doctor phone (202) 625-3333 collect. In other
countries, have the doctor call your local poison control center.
2. Make sure the batteries are inserted correctly and always follow the toy and
battery manufacturer’s instructions.
3. Do not mix old and new batteries, alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
CAUTION
IMPORTANT: BATTERY INFORMATION
Please retain this information for future reference.
Batteries should be replaced by an adult.
1. Always follow the instructions carefully. Use only batteries specified and be sure
to insert item correctly by matching the + and – polarity markings.
2.
Do not mix old and new batteries or standard (carbon-zinc) with alkaline batteries.
3. Remove exhausted or dead batteries from the product.
4. Remove batteries if product is not to be played with for a long time.
5. Do not short-circuit the supply terminals.
6. Should this product cause, or be affect by, local electrical interference, move it
away from other electrical equipment. Reset (switching off and back on again or
removing and reinserting batteries) if necessary.
7. RECHARGEABLE BATTERIES: Do not mix these with any other types of batteries.
Always remove from the product before recharging. Recharge batteries under adult
supervision. DO NOT RECHARGE OTHER TYPES OF BATTERIES.
8. As with all small items, these batteries should be kept away from children. If
swallowed, seek medical attention immediately.
CAUTION
Press here to activate
the glowing spotlight!
Press again to switch off.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Hasbro Bump 'N Go Web Rider User manual
-
-
-
-
-
-
-
-
-
Other documents
-
Marvel Industries 77237/77184 User manual
-
Chuck and Friends TONKA CHUCK & FRIENDS CUSHY CRUISIN’ School Bus User manual
-
Kmart 43268436 User manual
-
Playskool Tonka Chuck and Friends Adventure Rig with Chuck 33565 Operating instructions
-
-
-
Mr Beams MB310 Operating instructions
-
Mr Beams MB300 User manual
-
SingingMachine SMK470 User manual
-
Transformers CYBERTRON Ultra Class: JETFIRE Figure Operating instructions
