LCDV2656HD
LCDV3256HD
LCDV2656HD
LCDV3256HD
LCD Digital TVLCD Digital TV
Power Cord Connection
YPbPr Connection
HDMI Connection
VGA(PC) Connection
Antennas Connection
COAX Connection
8
9
8
7
7
9
10
10
USB PORT FUNCTION
AV Connection
Remote control instructions in TV mode
Remote control instructions in DTV/USB mode
Remote control setup
Remote control instructions in TELETEXT mode
11
15
12
13
Remote control instructions in DVD mode
14
SOUND MENU
PICTURE MENU
TIME MENU
LOCK MENU
CHANNEL MENU
EPG and Channel List MENU
INPUT SOURCE
16
21
22
24
23
25
19
27
26
16
Multimedia(USB) MENU
33
DVR MENU
OPTION MENU
INSTALLATION GUIDE
1
3
3
6
5
SAFETY
PRECAUTIONS
SAFETY
PRECAUTIONS
PREFACEPREFACE
FRONT BACK
CONNECTIONS
OF LCD
FRONT BACK
CONNECTIONS
OF LCD
44
55
REMOTE CONTROLREMOTE CONTROL
66
BASIC
A
INSTALL TION
BASIC
INSTALLATION
IN THE CARTONIN THE CARTON
77
MENU
OPERATION
MENU
OPERATION
11
22
33
SPECIFICATIONSSPECIFICATIONS
99
88
TROUBLESHOOTING
AND ADVICE
TROUBLESHOOTING
AND ADVICE
47
48
General Setup
DVD OPERATIONDVD OPERATION
1010
Audio Setup
Dolby Digital Setup
Preference Setup
39
41
42
43
2
1 PREFACE. 1. PREFACE
2 SAFETY PRECAUTIONS. 2. SAFETY PRECAUTIONS
Power cord and cables must be properly routed and protected to prevent
people from stepping on them and causing the TV to fall.
Minimum distances
10cm
20cm
10cm 5cm
Put the TV on a stable surface.
Do not place any material on the TV.
Do not block or cover the ventilation openings on the TV.
Do not use the TV with fixtures other than those provided or
suggested by the manufacturer.
3
Thank you for Choosing this TEAC product. Before operating the TV, please read and follow all
instructions and heed all warning.
Please keep these instructions for future reference.
Please note the diagrams in this manual are for reference only, your unit may differ slightly.
Keep the TV away from heat sources.
Unplug the TV before cleaning it. Do not use solvent or liquid to clean
the TV.
Only clean the TV with a soft and dry cloth.
Unplug the TV during lightning storms or when unused for long periods
of time.
4
Keep the TV dry and away from humidity.
Do not subject the TV to dripping liquids or moist environments.
Do not place any vessels containing liquids on or near the TV such as
vases,cups, etc.
If the following problems occur,turn off the TV set and unplug the AC power
cord immediately:
- AC power cord is damaged.
- Poor fitting AC power outlet.
- TV set is damaged by being dropped, hit or having something thrown at it.
- Any liquid or solid object has fallen through the openings in the cabinet.
NEVER attempt to repair the unit yourself. Contact your dealer or the
TEAC Customer Care Centre (see back page for details) to have your
unit checked and repaired by approved service personnel.
3 . IN THE CARTON3 . IN THE CARTON
5
Please make sure the following items are included in your package.
If any items are missing,please contact your dealer.
2 x AAA Battery2 x AAA Battery
User ManualUser Manual
Remote ControlRemote Control
LCD TV SETLCD TV SET
1.5V
1
.5
V
User Manual
Power CablePower Cable
R.LIS T
T.LIST
Quick Start Guide
Quick Start Guide Quick Start Guide
6
1. Press“ VOL+/VOL-”to increase or decrease the sound level.
2. Press“ CH+/CH-”to scan through channels.
3. Press “MENU”to bring up the main menu on the screen.
4. Press“INPUT”to select the input source.
5. on or off.
6. Insert the DVD with the label toward the device’s back panel into the DVD slot on the right side of
you TV set. Only push the DVD slightly until the unit feeds it automatically.
7. PLAY/PAUSE in DVD mode.
8. OPEN/CLOSE in DVD mode.
9. STOP in DVD mode.
10. POWER INDICATOR: show red in
standby mode, show green or blue
when your TV is switched on.
11. REMOTE SENSOR: infrared
sensor for the remote control.
Press“POWER” button to turn the TV
DVD(LABEL SIDE)
6
7
8
9
4 FRONT , BACK , CONNECTIONS OF LCD. 4. FRONT , BACK , CONNECTIONS OF LCD
Front View
Back View and Control Connections
10
11
1 POWER Power on off the TV set
2. AC IN: Main power input.
3 USB : Connect to the External drive.
4. HDMI1 HDMI2 HDMI3: Connect to the HDMI output jack
.
5. VGA(PC): Connect to the PC-RGB output jack of PC.
6. PC AUDIO : Connect the Audio output jack of PC.
7. YPbPr1/YPbPr2: Connect the YPbPr output jack of DVD
or VCR.
8. COAX: Connect the SPDIF receiver.
9. VIDEO Audio L R : Connect to the Video output jack
of DVD or VCR.
10. RF IN: Connect the antenna.
11. PHONE: Connect the headphone.
. : / .
PORT
/ /
of DVD
/ ( / ) /Audio
2
3
VGA(PC)VGA(PC)
USBUSB
HDMI1HDMI1 HDMI2HDMI2
HDMI3HDMI3
PC
AUDIO
PC
AUDIO
O XC A
O XC A
PHONEPHONE
RF IN RF IN
4
5
8 9
Pb1Pb1
Pr1Pr1
Y1Y1
Pb2Pb2
Pr2Pr2
Y2Y2
LL RR
VIDEOVIDEO
AC INAC IN
1
6
7
7
10
5
2
1
4
3
VOL+
MENU
INPUT
POWER
POWERPOWER
11
CH+
VOL+
CH-
1
On
Off
POWER(LCDV2656HD)POWER( )
(LCDV3256HD)
75 OHM
ANTENNA
PLUG
POWER PLUG OF
ANTENNA
AMPLIFIER
OUTDOOR
ANTENNA
AMPLIFIER
VHF ANTENNA UHF ANTENNA
INDOOR
ANTENNA
AMPLIFIER
To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as
Shown can be sourced from TV equipment shops, which will provide service for correct installation
and connection. After installation, insert the 75-ohm antenna plug into the antenna jack as shown.
5. BASIC A INSTALL TION 5. BASIC INSTALLATION
Power Cord ConnectionPower Cord Connection
Antennas Connection Antennas Connection
- Connect the power cord correctly as shown.
- Press the POWER switch of your LCD TV to switch on the LCD TV.
The power indicator on the front panel lights up in red.
RF IN
7
On
Off
LCDV2656HD
On
Off
LCDV3256HD
8
VGA(PC)VGA(PC)
USBUSB
HDMI1HDMI1 HDMI2HDMI2
HDMI3HDMI3
PC
AUDIO
PC
AUDIO
CO
AXCO
AX
PHONEPHONE
RF IN RF IN
Pb1Pb1
Pr1Pr1
Y1Y1
Pb2Pb2
Pr2Pr2
Y2Y2
LL RR
VIDEOVIDEO
VGA(PC)VGA(PC)
USBUSB
HDMI1HDMI1 HDMI2HDMI2
HDMI3HDMI3
PC
AUDIO
PC
AUDIO
C
O
A
X
C
O
A
X
PHONEPHONE
RF IN RF IN
Pb1Pb1
Pr1Pr1
Y1Y1
Pb2Pb2
Pr2Pr2
Y2Y2
LL RR
VIDEOVIDEO
Audio CableAudio Cable
AUDIOAUDIORGB-PC OUTPUTRGB-PC OUTPUT
Connect the RGB output of the VGA to the PC IN jack on the set. Connect the AUDIO output of the
PC to the PC AUDIO jack on the set . Select the VGA (or PC) input source with using SOURCE button
on the remote control.
TV BackTV Back
VGA CableVGA Cable
USB PORT FUNCTION
USB PORTUSB PORT
Put the USB flash drive to the USB port, Select USB channel source with using the SOURCE
button on the remote control.
TV BackTV Back
9
VGA(PC)VGA(PC)
USBUSB
HDMI1HDMI1 HDMI2HDMI2
HDMI3HDMI3
PC
AUDIO
PC
AUDIO
COAXCOAX
PHONEPHONE
RF IN RF IN
Pb1Pb1
Pr1Pr1
Y1Y1
Pb2Pb2
Pr2Pr2
Y2Y2
LL RR
VIDEOVIDEO
VGA(PC)VGA(PC)
USBUSB
HDMI1HDMI1 HDMI2HDMI2
HDMI3HDMI3
PC
AUDIO
PC
AUDIO
C
OA
X
C
OA
X
PHONEPHONE
RF IN RF IN
Pb1Pb1
Pr1Pr1
Y1Y1
Pb2Pb2
Pr2Pr2
Y2Y2
LL RR
VIDEOVIDEO
COAX Connection
Connect to Audio Amplifier device to the COAX output jack on the TV.
Coax CableCoax Cable
SPDIF INPUT
Audio AmplifierAudio Amplifier
Audio Amplifier BackAudio Amplifier Back
HDMI Connection
DVD or VCR DVD or VCR
DVD or VCR BackDVD or VCR Back
HDMI O UT
HDMI CableHDMI Cable
HDMI connection allows the user to transfer all audio/video/control signals through one
cable only. These signals are transferred in digital.
TV BackTV Back
DVD or VCR DVD or VCR
DVD or VCR BackDVD or VCR Back
HDMI O UT
HDMI CableHDMI Cable
DVD or VCR DVD or VCR
DVD or VCR BackDVD or VCR Back
HDMI O UT
HDMI CableHDMI Cable
TV BackTV Back
10
VGA(PC)VGA(PC)
USBUSB
HDMI1HDMI1 HDMI2HDMI2
HDMI3HDMI3
PC
AUDIO
PC
AUDIO
C
O X
AC
O X
A
PHONEPHONE
RF IN RF IN
Pb1Pb1
Pr1Pr1
Y1Y1
Pb2Pb2
Pr2Pr2
Y2Y2
LL RR
VIDEOVIDEO
VGA(PC)VGA(PC)
USBUSB
HDMI1HDMI1 HDMI2HDMI2
HDMI3HDMI3
PC
AUDIO
PC
AUDIO
CO
AXCO
AX
PHONEPHONE
RF IN RF IN
Pb1Pb1
Pr1Pr1
Y1Y1
Pb2Pb2
Pr2Pr2
Y2Y2
LL RR
VIDEOVIDEO
AV Connection
Connect the VIDEO and AUDIO output jack of the DVD or VCR to the VIDEO jacks on the TV set
using the RCA cable. Match the jack colors: Video is yellow, Audio left is white, and Audio right is red.
Select the AV input source via the SOURCE button on the remote control.
TV BackTV Back
Video cableVideo cable
DVD or VCR backDVD or VCR back
DVD or VCRDVD or VCR
YPbPr Connection
Pr Pr
PbPb
YY LL RR
TV BackTV Back
DVD or VCR DVD or VCR
DVD or VCR BackDVD or VCR Back
Auido Cable Auido Cable
YPbPr CableYPbPr Cable
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV set. Connect the Audio
output of the DVD or VCR to the Audio input jacks on the TV set using the RCA cable.
Match the jacks colors : Y is green, Pb is blue, Pr is red, Audio left is white and Audio right is red.
Select YPbPr input source via the SOURCE button on the remote control.
Pr Pr
PbPb
YY LL RR
DVD or VCR DVD or VCR
DVD or VCR BackDVD or VCR Back
YPbPr CableYPbPr Cable
11
6 REMOTE CONTROL.6.REMOTE CONTROL
DISPLAYDISPLAY
OK
ENTER
OK
ENTER
ASPECTASPECT
MENUMENU
EXITEXIT
SLEE PSLEE P
SOUR CESOUR CE
D.MENUD.MENU
LISTLIST
SUBTITLESUBTITLE
TITLETITLE
ZOOMZOOM
1010 +10+10
PROGRAMPROGRAM
REPEATREPEAT
TTXTTX
GOTOGOTO
HOLDHOLD
D.SETUPD.SETUP
A-BA-B
D.DIS PLAYD.D IS PLAY
INDEXINDEX
I/III/II
RECREC
AUDIOAUDIO
SIZESIZE
REVEALREVEAL
STANDBYSTANDBY
INFOINFO
FAVFAV
SUBPAGESUBPAGE EPGEPG
TV/RADIOTV/RADIO
MUTEMUTE
Remote control instructions in TV mode
STANDBY
Turn the LCD TV ON or OFF.
MUTE
Press to mute the sound. Press again or press VOL+ to
un-mute the TV.
AUDIO(I/II)
Press to search the NICAM modes.
NUMBER BUTTONS
Press 0-9 to select a TV channel directly when you are
watching TV. The channel change after 2 seconds.
MENU
Brings up the main TV menu to the screen.
THUMBSTICK( ▲/ ▼/◄ / ►/ OK ENTER )
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
EXIT
Exit the main TV menu to the screen.
CH+/CH-
Press to scan through channels.
VOL+/VOL-
Press to increase / decrease the sound level.
Return to the previous channel viewed.
DISPLAY
Press to display the source and channel's information.
SLEEP
Lets you select amount of time before your TV turn itself
off automatically.
SOURCE
Press SOURCE to display the OSD input source,
Press▲▼to select an input spurce,and then press
OK to confirm.
LIST
Press to display the TV program list.
ASPECT
Selects screen display ratio.
R.LIS T
T.LIS T
12
DISPLAYDISPLAY
OK
ENTER
OK
ENTER
ASPECTASPECT
MENUMENU
EXITEXIT
SLEE PSLEE P
SOUR CESOUR CE
D.MENUD.MENU
LISTLIST
SUBTITLESUBTITLE
TITLETITLE
ZOOMZOOM
1010 +10+10
PROGRAMPROGRAM
REPEATREPEAT
TTXTTX
GOTOGOTO
HOLDHOLD
D.SETUPD.SETUP
A-BA-B
D.DIS PLAYD.D IS PLAY
INDEXINDEX
I/III/II
RECREC
AUDIOAUDIO
SIZESIZE
REVEALREVEAL
STANDBYSTANDBY
INFOINFO
FAVFAV
SUBPAGESUBPAGE EPGEPG
TV/RADIOTV/RADIO
MUTEMUTE
Remote control instructions in DTV/USB mode
NUMBER BUTTONS
Press 0-9 to select a channel.
CH+/CH-
When watching a channel, changes the channel.
INFO
Press to display the source and channel's information.
COLOR BUTTONS
Color buttons (respectively red, green, yellow and blue)
used in a few sub-menus.
SUBTITLE
To display subtitle in DTV mode.
AUDIO
To display audio menu.
TV/RADIO
When watching a channel,allows you switch between
TV and Radio modes.
FAV
Favorite program list.
REC
Press to record the TV program in DTV mode.
EPG
Launches the EPG(Electronic Program Guide)in DTV
mode.
REPEAT
Press to select the repeat mode in USB mode.
Stop playing or stop recording.
Fast reverse and Fast forward.
Previous / next chapter in USB mode,or play the Previous
Play or pause.
Press to enter Timeshift, the image paused and it start
record from the paused position.
(Timeshift)
R.LIS T
T.LIS T
T.LIST
Press to display the Record Timer Schedule List.
R.LIST
Display the recorded file list.
/next scene of the recorded programs, jump by 30 seconds.
13
DISPLAYDISPLAY
OK
ENTER
OK
ENTER
ASPECTASPECT
MENUMENU
EXITEXIT
SLEE PSLEE P
SOUR CESOUR CE
D.MENUD.MENU
LISTLIST
SUBTITLESUBTITLE
TITLETITLE
ZOOMZOOM
1010 +10+10
PROGRAMPROGRAM
REPEATREPEAT
TTXTTX
GOTOGOTO
HOLDHOLD
D.SETUPD.SETUP
A-BA-B
D.DIS PLAYD.D IS PLAY
INDEXINDEX
I/III/II
RECREC
AUDIOAUDIO
SIZESIZE
REVEALREVEAL
STANDBYSTANDBY
INFOINFO
FAVFAV
SUBPAGESUBPAGE EPGEPG
TV/RADIOTV/RADIO
MUTEMUTE
Remote control instructions in TELETEXT mode
TTX
Press to switch between TV and Teletext mode.
SUBPAGE
TELETEXT Subpage.
HOLD
Freeze the current page.
SUBTITLE
To display subtitle.
REVEAL
Reveal or hide the hidden words.
COLOR BUTTONS
Select 4 Preferred TELETEXT page.
NUMBER BUTTONS
Press 0-9 to select a teletext page.
INDEX
Request index page when index link is valid.
CH+/CH-
Page up and Page down.
SIZE
Change the picture size.
R.LIS T
T.LIS T
14
Remote control instructions in DVD mode
DISPLAYDISPLAY
OK
ENTER
OK
ENTER
ASPECTASPECT
MENUMENU
EXITEXIT
SLEE PSLEE P
SOUR CESOUR CE
D.MENUD.MENU
LISTLIST
SUBTITLESUBTITLE
TITLETITLE
ZOOMZOOM
1010 +10+10
PROGRAMPROGRAM
REPEATREPEAT
TTXTTX
GOTOGOTO
HOLDHOLD
D.SETUPD.SETUP
A-BA-B
D.DIS PLAYD.D IS PLAY
INDEXINDEX
I/III/II
RECREC
AUDIOAUDIO
SIZESIZE
REVEALREVEAL
STANDBYSTANDBY
INFOINFO
FAVFAV
SUBPAGESUBPAGE EPGEPG
TV/RADIOTV/RADIO
MUTEMUTE
D.SETUP
Used for selecting programs. It may also be used to
execute commands.
REPEAT
Press REPEAT to cycle through the repeat play options.
A-B
This button enables you to repeat a selected section
from the disc.
SUBTITLE
Select a different subtitle language(the DVD disc must have
the subtitle you selected.
D.DISPLAY
Press to display the DVD information of DVD mode.
PLAY/PAUSE in DVD mode.
To eject the disc.
DVD STOP
Jump to previous and next track.
Fast backward and forward key.
D.MENU
DVD disc menu Access to menu.
NUMBER BUTTONS
Numerical buttons for various data.
PROGRAM
Program a disc playing in a desired sequence.
THUMBSTICK( ▲/ ▼/◄ / ►/ OK ENTER )
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
AUDIO(I/II)
AUDIO selection buttons in DVD mode.
GOTO
It is possible to get access to any point on the directly
using the "GOTO" menu.
Press GOTO to access the "GOTO" menu.
ZOOM
In play state, press ZOOM, the player will zoom
in the picture one time.
R.LIS T
T.LIS T
Note: Please ensure that the TV you have bought with DVD loader, otherwise, all these parts
with no effect.
Remote control setupRemote control setup
1. Open the cover.
2. When inserting the AAA batteries, make sure correct polarities as per”+“and ”-“marks
on the batteries and within the battery compartment
3. Replace the battery cover.
To prevent battery leakage which may result in bodily injury or damage to the remote:
1. Install all batteries correctly, and as marked on the remote control.
2. Do not mix batteries:(OLD and NEW or CARBON and ALKALINE, etc)
Remove batteries when the remote is not used for a long time.
.
15
Move Back
MEN U
OK
Select
Quit
EXI T
16
Auto Scan
Move
OK
OK Exit
EXI T
Country
Tune Type
Australia
ATV+DTV
7 . MENU OPERATION7 . MENU OPERATION
CHANNEL MenuCHANNEL Menu
Note
CHANNEL can be only selected under ATV/DTV mode. The CHANNEL menu is disabled
while in all other input modes.
Note
CHANNELCHANNEL
Auto Scan
DTV Manual Tuning
ATV Manual Tuning
Program Edit
Signal information
Record Start
Move Back
MEN U
OK
Select
Quit
EXI T
CHANNELCHANNEL
ATV Manual Tuning
Program Edit
Signal information
Record Start
Recorded List
Recorded Mode
Schedule List
DVR File System
Installation Guide
Move
Select
OK
Quit
EXIT
Please do some selects,Then
Press OK button to begin auto tuning.
Please do some selects,Then
Press OK button to begin auto tuning.
When powering up for the first time or after Factory Reset, the Installation Guide will appear on
screen.
Press▲▼◄► to set the OSD language/Country/Tune Type and press OK to begin auto tuning.
OSD Lauguage
Country
Tune Type
Press MENU button display the main menu, use CHANNEL , ▼
, .
to ◄► to select menu press OK or
to enter and press menu to return to the main menu
English
Australia
ATV+DTV
In ATV/DTV mode press the MENU button to enter the main menu. A window will appear, use ◄►
to scroll through the following menu headings: CHANNEL, PICTURE, SOUND, TIME, OPTION
and LOCK. Press ▼ or OK to enter the sub menus under the headings listed above.
While in MENU mode, press the MENU button to return to the previous menu window, or press
EXIT to exit menu mode completely.
Auto ScanAuto Scan
INSTALLATION GUIDEINSTALLATION GUIDE
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
