Vivanco PCI -> Serial 2x User guide

Brand: Vivanco

Model: PCI -> Serial 2x

Category: Interface cards/adapters

Type: User guide

Vivanco GmbH

Ewige Weide 15

D-22926 Ahrensburg/Germany

Phone +49 (0) 4102/231-0

Fax +49 (0) 4102/231-160

Internet: www.vivanco.com

Hotline:

✆ 0180-5 40 49 10

[email protected]

EDV-Nr.: 3981

IO PCI 2S

09/01

User`s guide

Bedienungsanleitung

Notice d’emploi

Instrucciones de uso

Istruzioni per l’uso

Gebruiksaanwijzing

PCI ➔ Serial 2x

User’s Guide Page 4-5

Bedienungsanleitung Seite 6-7

Mode d’emploi Page 8-9

Instrucciones de uso Página 10-11

Istruzioni per I’uso Pagina 12-13

Gebruiksaanwijzing Zijde 14-15

Software Installation

Windows

95/98/ME:

STEP①: The system will detect the device and "Add New Hardware" wizard.

Click "Next" to continue.

STEP②: The system will suggest to searches for the best driver for the device.

Click "Next" to continue.

STEP③: Place CD in CD ROM drive now. If the driver files are on the hard disk,

point the wizard at the correct directory. Click "Next" to continue.

STEP④: The system searches for the driver. If it doesn’t find the "NetMos" device,

make sure the driver files are present and the wizard knows

where to find them.

STEP⑤: Once the system has found the driver, click "Next" to continue.

STEP⑥: System driver is installed.

STEP⑦: Click "Finish".

STEP⑧: Install other function (parallel port/local bus) and the UART ports

automatically.

Windows

NT4:

STEP①: Run "NetMosParPortDriver.exe"from the \NT4 subdirectory on the CD.

STEP②: When the installation application starts, click "Next" to continue.

STEP③: Ensure "Install" is selected, then click "Next".

STEP④: Click "OK" to accept the license agreement.

STEP⑤: The system will install the driver and prompt for a restart.

STEP⑥: The port is available for use after the restart.

Windows

2000:

STEP①: Click "Browse", and reach to CD ROM at the directory of

"\IO\222N-2\Win2000" – for Multi PCI IO port Card

STEP②: Click "OK" and "Next".

STEP③: Appear "PCI Multi-I/O Adapter", Click "Finish".

Product Features

• Serial PCI interface card, provides 2 additional COM ports

• For devices with serial connector e.g. modems, digital cameras,...

• PCI compatible Dual UART

• Status report capability

• Compatible with 16C550

• Fast data rates up to 1 Mbytes/s (serial ports)

• Re-map function for legacy ports

• As replacement for the existing interface or as extension

• Usable in combination with existing interfaces

• 16 byte transmit-receive FIFO (UART)

• Easy to install thanks Plug&Play support

• Driver for Windows

95/98/ME/NT/2000

• PCI specification V2.1/2.2 compliant

• Single 5-V Operation

System Requirements:

• Windows

95/98/ME

• Windows

NT4.0/2000/XP

• Linux

• Spare PCI slot

• CD ROM drive

Hardware Installation

Installation steps:

• Turn the machine power off. Pull out the power cord.

• Open up the cover of the computer case.

• Discharge any static electricity build up in your body by touching a large

grounded metal surface. Avoid any contact with internal parts.

Handle cards only by their edges.

• Insert this card to the PCI slot of the main board.

• Close the computer case and reconnect all connections.

Page is loading ...

KEC 222N

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

This device is in conformance with Part 15 of the FCC Rules and Regulations for

Information Technology Equipment. Operation of this product is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) This device accept any interference received, including interference that may

cause undesired operation.

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B

Computing Device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment

is operated in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and if not installed and used in accordance to the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio and television reception,

which can be determined by turning the equipment off and on, the user is

encouraged trying to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the antenna.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experience radio or TV technician for help.

IMPORTANT

Any changes or modifications not expressly approved by the party responsible

for the compliance could void the user's authority to operate this equipment.

This product requires the use of shielded cables in order to comply with FCC

requirements.

A c k n o w l e d g e m e n t s

IBM and OS/2 are trademarks of International Business Machines Corporation.

Intel is a registered trademark of Intel Corporation.

Windows is a registered trademark of Microsoft Corporation.

All other brand names and trademarks used here are

trademarks of their respective owners.

Vivanco PCI -> Serial 2x User guide

Brand: Vivanco

Model: PCI -> Serial 2x

Category: Interface cards/adapters

Type: User guide

Download PDF

report

in other languages

italiano: Vivanco PCI -> Serial 2x Guida utente
français: Vivanco PCI -> Serial 2x Mode d'emploi
español: Vivanco PCI -> Serial 2x Guía del usuario
Deutsch: Vivanco PCI -> Serial 2x Benutzerhandbuch
Nederlands: Vivanco PCI -> Serial 2x Gebruikershandleiding

Vivanco PCI -> Serial 2x User guide

Vivanco PCI -> Serial 2x User guide

in other languages

Related papers

Other documents