DeLOCK 89015 User manual

DeLOCK
Brand
DeLOCK
Model
89015
Category
Interface cards/adapters
Type
User manual

DeLOCK 89015 PCI Card adds an external parallel port to the user's PC. The card is compatible with devices such as scanners and printers that use the parallel port for data transfer. It supports SPP, PS2, EPP, and ECP modes, ensuring compatibility with a wide range of parallel port devices. The card has a FIFO buffer of 16 bytes and a data transfer rate of up to 1.5 Mb/s. It automatically selects IRQ and I/O settings and supports PCI IRQ sharing. The card is compliant with the 32-Bit PCI Standard 2.1. It is compatible with Windows 2000/XP/XP-64/Vista/Vista-64/7 and Linux systems with Kernel 2.

DeLOCK 89015 PCI Card adds an external parallel port to the user's PC. The card is compatible with devices such as scanners and printers that use the parallel port for data transfer. It supports SPP, PS2, EPP, and ECP modes, ensuring compatibility with a wide range of parallel port devices. The card has a FIFO buffer of 16 bytes and a data transfer rate of up to 1.5 Mb/s. It automatically selects IRQ and I/O settings and supports PCI IRQ sharing. The card is compliant with the 32-Bit PCI Standard 2.1. It is compatible with Windows 2000/XP/XP-64/Vista/Vista-64/7 and Linux systems with Kernel 2.

PCI Card > 1 x Parallel
Product-No:89015
User manual no:89015-a
www.delock.com
Gebrauchsanweisung
User manual
Manuel d'utilisation
Manual del usuario
-
1
-
Description
The Delock PCI card expands your PC by one external parallel port. You can
connect devices like scanner, printer etc. to the card.
Specification
• 1 x DB25 parallel port
• SPP, PS2, EPP, ECP compatible IEEE 1284
• FIFO: 16 byte
• Data transfer rate up to 1.5 Mb/s
• Automatically selects IRQ and I/O
• Supports PCI IQR sharing
• 32-Bit PCI standard 2.1
System requirements
• Windows 2000/XP/XP-64/Vista/Vista-64/7, Linux ex Kernel 2.6
• PC with one free PCI Slot
Package content*
• PCI card
• Driver CD
• User manual
*Make sure that product package contains all items before operation. If any item
is missing or damaged, then please contact your dealer immediately.
Safety instructions:
• Protect the product against moisture
• Avoid anti-static electricity when installing the card
-
2
-
Hardware Installation
Note:
Follow the general instructions for installation of the card. If necessary, read the
manual of your computer, or ask a specialist for help.
1. Turn off your PC, and unplug the power cord.
2. Open the housing.
3. Remove the slot holder from the available PCI.
4. Insert the card straight and carefully into the free PCI slot, until it is well
seated.
5. Use a screw to attach the card to the housing.
6. Reattach the housing, and connect the power cord to the AC adapter.
Driver Installation
Windows XP
Controller installation:
1. After installing the hardware and starting your computer the hardware
assistant will appear. Choose the option "No, not this time" and click "Next".
2. Put the driver CD in the CD-ROM drive, choose "Install software
automatically" and click "Next".
3. The driver will be found automatically and installed. Click on "Finish".
Install parallel interface
4.
The hardware assistant appears with a newly found parallel interface.
Choose "No, not this time" and click "Next".
5. Choose "Install software automatically" and click "Next".
6. Click "Finish".
7. Your PCI card is installed and ready for use.
Windows 2000
Controller installation:
1. After installing the hardware and starting your computer the hardware
assistant will appear.
2. Put the driver CD in the CD ROM drive and click on "Next".
3. Select the "CD drive" option and click on "Next".
4. After the driver is located, click on "Next".
5. Click on "Finish".
-
3
-
Install parallel interface
6.
The hardware assistant appears with a newly found parallel interface.
7. Choose "Install software automatically" and click "Next".
8. Click "Finish".
9. Your PCI card is installed and ready for use.
Support Delock
If you have further questions, please contact our customer support
[email protected]
You can find current product information on our homepage:
www.delock.de
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user's manual may be reproduced, or transmitted for any purpose,
regardless in which way or by which means, electronically or mechanically,
without explicit written approval of Delock.
Edition: 12/2011
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

DeLOCK 89015 User manual

DeLOCK
Brand
DeLOCK
Model
89015
Category
Interface cards/adapters
Type
User manual

DeLOCK 89015 PCI Card adds an external parallel port to the user's PC. The card is compatible with devices such as scanners and printers that use the parallel port for data transfer. It supports SPP, PS2, EPP, and ECP modes, ensuring compatibility with a wide range of parallel port devices. The card has a FIFO buffer of 16 bytes and a data transfer rate of up to 1.5 Mb/s. It automatically selects IRQ and I/O settings and supports PCI IRQ sharing. The card is compliant with the 32-Bit PCI Standard 2.1. It is compatible with Windows 2000/XP/XP-64/Vista/Vista-64/7 and Linux systems with Kernel 2.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents