Porter Cable 59370 is a door hinge template designed to cut out areas for the hinge on both doors and door frames. It is adjustable to accommodate hinges from 6" to 2-½" in length, in half-inch increments. The template can be used to create either 5/8" radius or 1/4" radius hinge recesses, as well as square-cornered hinge recesses. The template also includes a depth stop to ensure that the hinge recess is cut to the correct depth.
To use the template, first adjust it to the proper hinge size and shape. Then, place the template on the door or door frame and nail it in place. Use a router to cut out the hinge recess, following the instructions in the router's manual. Once the hinge recess is cut, you can install the hinges and hang the door.
Porter Cable 59370 is a door hinge template designed to cut out areas for the hinge on both doors and door frames. It is adjustable to accommodate hinges from 6" to 2-½" in length, in half-inch increments. The template can be used to create either 5/8" radius or 1/4" radius hinge recesses, as well as square-cornered hinge recesses. The template also includes a depth stop to ensure that the hinge recess is cut to the correct depth.
To use the template, first adjust it to the proper hinge size and shape. Then, place the template on the door or door frame and nail it in place. Use a router to cut out the hinge recess, following the instructions in the router's manual. Once the hinge recess is cut, you can install the hinges and hang the door.
Porter Cable 59370 is a door hinge template designed to cut out areas for the hinge on both doors and door frames. It is adjustable to accommodate hinges from 6" to 2-½" in length, in half-inch increments. The template can be used to create either 5/8" radius or 1/4" radius hinge recesses, as well as square-cornered hinge recesses. The template also includes a depth stop to ensure that the hinge recess is cut to the correct depth.
To use the template, first adjust it to the proper hinge size and shape. Then, place the template on the door or door frame and nail it in place. Use a router to cut out the hinge recess, following the instructions in the router's manual. Once the hinge recess is cut, you can install the hinges and hang the door.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI