Hama 00011596 Owner's manual

Type
Owner's manual
0 0011596/09.09
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted,
and subject to technical changes. Our general terms of delivery and payment are applied.
Hama GmbH & Co KG
D-86651 Monheim/Germany
www.hama.com
WEBCAM
00011596
Webcam & Headset
»AC-140«
6
Installing the Camera Driver
Attention: Please install the driver before the webcam is connected to your computer.
1. Insert the installation CD driver into your computer‘s CD-ROM drive and follow the
install Shield Wizard instructions.
2. When the installation has fi nished, connect the webcam to
one of your computer‘s USB ports. The computer will detect
the new device immediately.
3. Please run the programs „AMCAP” or „Hama Webcam Suite”
to view the image of the WEB CAMERA.
Installing the Headset
After the camera is installed, connect the two 3.5 mm jacks of headset to the soundcard of the
computer. Pink wire in the micro jack & green wire in the speaker audio jack.
How to use AMCAP tool:
AMCAP is an application that let you capture video in your system. It captures video to and .AVI
le. Below is a description of AMCAP‘s various options and features.
g User manual
7
* File/Set Capture File: where you save the captured fi le.
* Files/Allocate File Space: capturing will work better if
you capture into an .AVI fi le that already exists on your
local drive. Here you set how much space to reserve
(how big your fi le needs to be).
It also helps if you defragment your hard drive before
beginning capture, and have capture fi le near the
beginning of the physical drive.
* File/Save Captured Video As: Use this to copy the
captured data to another fi le, so you can reuse the
same preallocated fi le for your next capture.
* Device: under the devices menu you choose which of your
video cameras you will be capturing from.
* Options/preview: lets you watch the input video that is
being recorded in the application window.
* Options/Video Capture Filter: adjust various video settings,
such as brightness, contrast, etc.
8
* Options/Video Capture Pin: choose the video
color space and video size
Supported color spaces are RBG24, I420
Supported size is 160*120, 176*144, 320*240,
352*288, 640*480, 800*600, 1024*768, 1280*1024
* Capture/Start Capture: save the capture fi le in your
computer and select „START” and then „OK” to start capture
of video sequence or „Cancel” to cancel the capture.
* Capture/Set Frame Rate: where you can set the frame rate
you want for preview and video.
* Capture/Set Time Limit: where you can set the time limit for
video.
9
Uninstall camera‘s driver
1. Cklick „Start” from the task bar and
choose „Programs”
2. Select Hama PC-Webcam AC-140 ->
Uninstall” and follow the instructions.
Support and contact information
If products are defective:
Please contact your dealer or Hama Product Consulting if you have any product claims.
Internet / World Wide Web:
Product support, new drivers or product information can be found at www.hama.com
Support Hotline – Hama Product Consulting:
Tel. +49 (0) 9091 / 502-115
Fax +49 (0) 9091 / 502-272
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Hama 00011596 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI