Eastwood 1500 Lb Metal Saw Horse Operating instructions

Brand
Eastwood
Model
1500 Lb Metal Saw Horse
Type
Operating instructions

Eastwood 1500 Lb Metal Saw Horse is a heavy-duty piece of equipment designed to provide years of reliable service. Constructed from heavy-gauge steel, it can withstand loads of up to 1500 lbs., making it ideal for supporting heavy materials or equipment. The saw horse features 5 height adjustment positions, ranging from 24-1/2" to 40-1/2", allowing you to customize it for your specific needs. It also folds flat for easy storage, making it convenient to transport and store when not in use.

Eastwood 1500 Lb Metal Saw Horse is a heavy-duty piece of equipment designed to provide years of reliable service. Constructed from heavy-gauge steel, it can withstand loads of up to 1500 lbs., making it ideal for supporting heavy materials or equipment. The saw horse features 5 height adjustment positions, ranging from 24-1/2" to 40-1/2", allowing you to customize it for your specific needs. It also folds flat for easy storage, making it convenient to transport and store when not in use.

1500 LB. FOLDING
SAW HORSE
INSTRUCTIONS
Item #30650
The EASTWOOD 1500 LB. FOLDING SAW HORSE is constructed with heavy-gauge steel to provide
years of rugged and reliable service. The Saw Horse is 38” long, features 5 height adjustment
positions from 24-1/2” to 40-1/2”, and folds flat for easy storage.
2 Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information
provided with this product:
READ INSTRUCTIONS
• Read this entire manual before set up and use.
• Keep this manual in a safe location as it will be necessary to refer to it often.
HAZARD!
• Pinch Hazard. Keep hands and feet away from moving parts when in use.
• DO NOT stand on or use the Eastwood Saw Horse as a member of
a platform for standing on.
• Use ONLY on a completely flat, clean and level floor. Using on a sloped or
inclined surface can cause Saw Horse to collapse resulting in serious
personal injury, death, and vehicle or property damage.
• DO NOT use on crushed stone, gravel, sand, dirt, grass, hot asphalt or any
other unstable surface.
• Never attempt to support a vehicle on the Eastwood Saw Horse.
• DO NOT exceed load rating of 1500lbs. (680 kg.) per unit.
SET-UP FOR USE
1. Remove the hook & loop closure retain-
ing strap from the folded Saw Horse.
2. Place the Saw Horse upside-down with
the top rail resting on a flat, clean and
level floor surface.
3. Grip a set of legs and rotate them
upward to the 90° position (FIG. A).
Repeat for opposite set.
4. After both sets are firmly set in the
unfolded position, pull them apart and
rotate them fully outward allowing them
to locate against the built-in vinyl coated
Lock Tabs (FIG. B).
5. The Eastwood Saw Horse may now be
used as is or adjusted for height.
ADJUST FOR HEIGHT
1. Place the Saw Horse upside-down with
the top rail resting on a flat, clean and
level floor surface.
2. Loosen and remove the wing nuts and
carriage bolts from their locations in the
upper area of the legs.
3. Remove the lower telescoping section
of each leg and slide it outward to one of
the 5 chosen positions. Use care to allow
the larger rectangular cutouts of the
lower leg to slide under the lock-tabs
of the upper leg (FIG. C).
4. Replace the carriage bolts through the
nearest square holes and tighten the
respective wing nuts securely.
To order parts and supplies: 800.343.9353 >> eastwood.com 3
FIG. A
FIG. B
FIG. C
Be sure that at least 2 lock-tabs
are engaged at all times.
© Copyright 2019 Easthill Group, Inc. 3/19 Instruction item #30650Q Rev 1
If you have any questions about the use of this product, please contact
The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: tech@eastwood.com
PDF version of this manual is available at eastwood.com
The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA
800.343.9353 eastwood.com
FOLDING FOR STORAGE
1. Place the Saw Horse upside-down with the top rail resting on a flat, clean and level
floor surface.
2. Remove wing-nuts and carriage bolts to shorten legs to fully retracted, storage length.
Replace carriage bolts and wing nuts.
3. Pull each set of legs inward toward each other to clear the built-in vinyl coated lock tabs.
4. Rotate both sets of Legs 90° downward and nest them into the underside of the top rail.
5. Wrap the hook & loop closure retaining strap around the folded Saw Horse assembly
for transport.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Eastwood 1500 Lb Metal Saw Horse Operating instructions

Brand
Eastwood
Model
1500 Lb Metal Saw Horse
Type
Operating instructions

Eastwood 1500 Lb Metal Saw Horse is a heavy-duty piece of equipment designed to provide years of reliable service. Constructed from heavy-gauge steel, it can withstand loads of up to 1500 lbs., making it ideal for supporting heavy materials or equipment. The saw horse features 5 height adjustment positions, ranging from 24-1/2" to 40-1/2", allowing you to customize it for your specific needs. It also folds flat for easy storage, making it convenient to transport and store when not in use.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents