MMCmicro
TM
OPERATING MANUAL
SPECIFICATIONS
CONFIRMATION OF PARTS LIST
Dimension: 14 (L) x 12 (W) x 1.1 (T) mm
Voltage Performance: 1.7V to 1.95V or 2.7V to 3.6V
Clock Frequency: Minimum 2.4MB/sec
Humidity Performance: 5% to 95%RH
Plastic Case Manual
NOTE: Specifications are subject to change without notice.
REMOVAL THE PLASTIC CASE FROM BLISTER
1. Hold tight the blister.
2. Hold the blister upside down with about an inch of distance
between the blister and the table.
3. Use your fingers to push the edges of the plastic case.
4. Then MMCmicro
TM
card and adapter with plastic case will
drop on the table.
Step 1 Step 2 & 3 Step 4
REMOVAL AND STORAGE OF THE MMCmicro
TM
CARD IN PLASTIC CASE
1. Hold the case with both hands when opening and closing.
2. Unlock and open the lid of the case.
3. Store or remove the MMCmicro
TM
and adapter card in the tray.
Ensure the MMCmicro
TM
and adapter are placed properly on the
tray before closing the case.
4. Lock the plastic case.
Step 2 Step 3
PRECAUTIONS FOR HANDLING AND STORAGE
• Keep out of the reach of children. Get medical advice immediately if swallowed.
• Do not touch the interface pin directly by hands, metal or hard objects.
• Do not modify or disassemble the MMCmicro
TM
card.
• Do not wet, heat/fire, impact, drop or bend the MMCmicro
TM
card.
• Do not use or store in a humid and dusty place; in hot place such as inside a hot car, under a blazing sun, near
fire, a stove, an air-conditioner outlet, etc.
• Do not expose to strong magnet fields, electrical noise and put near corrosive chemicals/gas. This may cause
damage through melting or the emission of heat/smoke or cause product failure.
• Do not place in cooking appliances such as microwave ovens or high-pressure containers.
• Do not detach the label on the MMCmicro
TM
card and adapter. Do not attach other stickers/labels on the
MMCmicro
TM
card and adapter.