PC Direct Connect using
Cat5 Patch Cable
AK-SC 255
Service Guide
ADAP-KOOL® Refrigeration Control System
Service Guide | PC Direct Connect using Cat5 Patch Cable
© Danfoss | ADAP-KOOL® | 2018.08
2 | AX279033702249en-000101
255:
Go to Communications -> Internet -> Config. Match settings to
below.
AKA 65:
Click on ‘Options’, and select the ‘Connections’ tab. Match settings
to below.
Service Guide |PC Direct Connect using Cat5 Patch Cable
AX279033702249en-000101 | 3
© Danfoss | ADAP-KOOL® | 2018.08
PC:
Open your Network Connections on your PC (found inside the
Control Panel), right-click on ‘Local Area Connection’ and go to
Properties. Highlight the TCP/IP option and click on Properties.
Select ‘Use the following IP address’ and match settings to below.
Service Guide | PC Direct Connect using Cat5 Patch Cable
© Danfoss | ADAP-KOOL® | 2018.08
4 | AX279033702249en-000101
Click on the ‘Local’ button of the AKA65 software.
When finished, make sure to return PC settings back to original
values.
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alternations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respecitve companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
-
1
-
2
-
3
-
4
